• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.65-71
• /
• 2017

This work presents a comparative work on the ride comfort of a quarter car suspension system between two different magneto-rheological (MR) dampers; one is conventional type without bypass hole and the other is featured by several bypass holes in the piston. As a first step, two different MR dampers are designed on the basis of the governing equation and manufactured with same geometric dimensions except the bypass holes. After investigating the field-dependent damping properties, two dampers are installed to the quarter car suspension system. The suspension model is then derived and a sky-hook controller is implemented to identify vibration control performance under random road. It is shown that the suspension system with MR damper featured by the bypass holes can provide much better ride quality than the case without the bypass holes. This is validated via experimental implementation.

• Archives of Plastic Surgery
• /
• 제33권3호
• /
• pp.319-323
• /
• 2006

Osteoma is benign tumor composed of mature compact or cancellous bone. Generally it is classified as periosteal(or peripheral) osteoma and endosteal(or central) osteoma by its origin. Clinically, periosteal osteoma on forehead is usually asymptomatic. From March 2002 to February 2005, We experienced 20 patients(23 cases) of histologically confirmed frontal osteoma. 20 patients are classified as sex, age, the number of osteoma, size, location and shape. Out of 20 patients, 16 were female and 4 were male in sex and mean age was 46. 18 patients have only one lesion but one patient has two lesions and another patient has three lesions. The size of osteoma varied from $7{\times}5{\times}3mm$ to $16{\times}14{\times}6mm$ and mean size is $12{\times}10{\times}5mm$. All osteomas were located at midline of forehead and shape of attachment was all sessile type. Surgical excision was superficial ostectomy through direct cutaneous incision or endoscopic approach. we obtained satisfactory result without specific complication.

• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.34-39
• /
• 2012

This study was conducted to investigate the microstructure and mechanical properties of friction stir lap joints. Invar 42 and SS 400 were selected as the experimental materials, and friction stir welding was carried out at a tool rotation speed of 200 rpm and welding speed of 100 mm/min. The application of friction stir welding to Invar 42 effectively reduced the grain size in the stir zone; the average grain size of Invar 42 was reduced from $11.5{\mu}m$ in the base material to $6.4{\mu}m$ in the stir zone, which resulted in an improvement in the mechanical properties of the stir zone. The joint interface between Invar 42 and SS 400 showed a relatively sound weld without voids and cracks, and the intermetallic compounds with $L1_2$ type in lap jointed interface were partially formed with size of 100 nm. Moreover, the hook in the advancing side of Invar 42 was formed from SS 400, which contributed to maintenance of the tensile strength. The evolution of microstructures and mechanical properties of friction stir lap jointed Invar 42 and SS 400 are also discussed herein.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.704-712
• /
• 2018

This study analyzed working postures using the Ovako Working Posture Analysis System (OWAS) to improve work clothes for construction workers. A video taken at a construction work site was stopped at regular intervals and the postures of relevant body parts proposed by OWAS was recorded. Additionally, based on analysis of the working postures code, the level of work action for each postures was classified from stage I to IV. General workers frequently straightened or bent forward at the waist, and used their legs to stand, bend, or walk. Wood workers moved extensively from the waist, keeping their legs relatively straight and their arms held below their shoulders, repeatedly tapping with a hammer weighing less than 10.0kg. Rebar bending workers mainly bent forward at the waist, with both legs bent or standing with one leg bent. Rebar transport and fixing workers walked with the waist straight, and occasionally one or both hands held above the shoulders. Their work also involved holding a hook, which weigh less than 10.0kg, in their hands, and the difficult task of lifting and placing long rebars, which weigh from 10.0 to 20.0kg or more. Concrete pouring workers bent or twisted their back to the side. Therefore, this study suggests that design goals should be different when developing workwear for each type of worker.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제38권2호
• /
• pp.31-37
• /
• 2019

Silkworm larval mortality specifically during spinning stage leading to non-spinning with specific morphological symptoms was frequently complained by sericulturists in Karnataka, India during 2015. Survey was conducted and information collected through questionnaire from the identified farmers who faced the problem of non-spinning in both traditional and non-traditional areas of Karnataka. Survey results indicate that the problem is specific to the silkworm crop of those farmers' who shifted from other crops of agriculture/ horticulture/olericulture/ floriculture to Sericulture. Silkworm rearing performance of the batches fed with these leaves confirmed that the pesticide sprayed to the crops previous to mulberry, remain in the soil and when mulberry plantation is taken up in these gardens, the pesticide is absorbed by the roots of mulberry plants and transported to the leaves. Silkworms that feed on these mulberry leaves, grow and ripen normally but during spinning stage, larvae die with external symptoms like regurgitation, body shrinkage, rectal protrusion later become hook shaped leading to non-spinning or partial metamorphosis into pupa and death or spin flimsy cocoons. Larval mortality ranged from a minimum of twenty five percent to a maximum of hundred percent. The problem was noticed from the first harvest of leaves and lasted for a maximum period of 36 months. Cocoon crop loss depends on the concentration, duration and type of pesticides used previously for other crops.

• 식물분류학회지
• /
• 제34권1호
• /
• pp.27-35
• /
• 2004

광주시 월각산 (275 m)의 계곡 주변에서 관중과의 남방고사리속과 관중속에 포함되는 미기록 양치식물 세 분류군을 발견하였다. 흰비늘고사리 [Ctenitis maximowicziana (Miq.) Ching]는 엽병 기부 인편의 색깔과 형태, 엽신의 형태, 둥근 신장형의 포막의 유무 등의 특상에 의해 남방고사리 [C. sinii (Ching) Ohwi]를 포함한 속내 다른 분류군들과 식별되었다. 남도톱지네고사리[Dryopteris lunanensis (H. Christ) C. Chr.]는 측우편의 수, 중부 이하의 우편의 제 1열편 혹은 2열편의 분열정도와 포자낭군의 분포양상에 의해 유사 분류군인 톱지네고사리 [D. atrata (Wall. ex Kunze) Ching]와 구별되었다. 애기지네고사리 [Dryopteris decipiens (Hook.) Kuntze var. diplazioides (H. Christ) Ching]는 중부 이하 우편의 분열 정도에 의해 원변종 var. decipiens와 식별되었으며 잎의 형태로 볼때 원변종과 큰지네고사리 (D. fuscipes C. Chr.)의 중간형처럼 보였다. 이들 세 분류군은 월각산의 해발 200-250 m에 국한하여 10개체 내외가 자생하고 있었다.

• 콘크리트학회지
• /
• 제7권4호
• /
• pp.157-168
• /
• 1995

Slip-Form시스템을 사용하였을 때 공기단축 및 우수한 품질의 벽체타설이 가능하기 때문에, 그 적용성 및 구조적 거동을 평가하는 연구가 수행되었다. 그러나 슬래브를 벽체와 동시에 타설할 수 없기 때문에 벽체-슬래브 접합부의 주변에 취약점이 생기게 될 가능성이 있으므로, 본 연구는 Slip-Form시스템을 사용한 벽식 구조의 성능을 평가하고, 효과적인 접합부를 개발하는 것을 목적으로 하였다. 이를 위하여 7개의 벽체 실험체와 8개의 벽체-슬래브 접합부 실험체를 제작하여 실험을 실시하였다. 그리고 실험결과들을 설계식 및 이론적인 해석 결과와도 비교하였다. 벽체압축 실험으로부터 그 구조적 거동이 일체식 구조와 유사함을 알 수 있었으며, 벽체-슬래브 접합부 실험으로 부터는 철근연결용 철물이 있는 경우는 제외하고는 좋은 성능을 나타냄을 알 수 있었다. 그러나 외벽에 철근연결용 철물을 사용한 경우에는 벽체의 강도을 검토하여 설계에 반영하여야 함을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.180-185
• /
• 2001

In the life assessment for plant structural component, the research on deterioration of toughness and material properties occurred in weldments has been considered as very important problems. In general, the microstructures composed in weldments are hugely classified with weld metal(W.M), fusion line(F.L), heat affected zone(HAZ), and base metal(B.M). It has been reported that the creep characteristics on weldments having variable microstructures could be unpredictably changed. Furthermore, it is also known that HAZ adjacent to F.L exhibits the decreased creep strength compared to those in base or weld metals, and promotes the occurrence of Type III and Type IV cracking due to the growth of grains and the coarsening carbides precipitated in ferritic matrix by welding and PWHT processes. However, the lots of works reported up to date on creep damage in power plant components have been mostly conducted on B.M and the creep properties on a localized microstructures in weldments have not as yet been throughly investigated. In this paper, for various microstructures such as coarse grain HAZ(CGHAZ), W.M and B.M in X20CrMoV121 steel weldment, the small punch-creep(SP-Creep) test using miniaturized specimen(t=0.5mm, 0.25mm) is performed to investigate a possibility for creep characteristics evaluation.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.107-123
• /
• 2008

The purpose of this research is to compare and analyze the brassiere patterns sold in Shanghai and Korea and to present basic materials needed in developing the brassiere patterns in Chinese adult women market. The study subject which is to find the difference in brassiere patterns of Korea and China has been selected of 3 Korean brands and 4 Chinese brands. 1. For the brassiere patterns sold in Korea, it were using the same size for the width of Hook&Eye, space between the shoulder lace on the back, slope of wing and the location of the Keeper was similar. 2. For the cup supporting base, Chinese brassiere covers the lower part of the breast and as it is not comfortable and has a phenomenon of loosening up, there were severe puckering. For issues in the wearing experiment, amendments in patterns with the cup part was required. 3. Chinese brassieres were big differences in wing angles and for Aimer, it had the steepest trend in wings and thus the wings headed down and for Gujin, as the angle of the wing was smaller than $90^{\circ}$, it was heading upward. 4. Upon comparing the patterns of the Korean and Chinese brassiere, although most of the sizes excluding the wing angle had similar sizes, there was big differences in the wing angle. The reason why the brassiere patterns sold in China had bigger wing angle was due to the fact that more Chinese women had sway back body type than the Korean women and should reflect such difference in body size into making the brassiere patterns for each women.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.150-160
• /
• 1994

Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 $^{\circ}$30'-43 $^{\circ}$N, 152 $^{\circ}$E-178 $^{\circ}$W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3$^{\circ}C$ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3$^{\circ}C$ of temperature at the surface and about 1$0^{\circ}C$ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3$^{\circ}C$ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.