• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.222-223
• /
• 2000

• 한국광학회지
• /
• 제3권2호
• /
• pp.137-140
• /
• 1992

레이저 플라즈마에서 방출되는 X-선의 이용이 크게 발전될 것이 예측되나, X-선에 대한 광속의 시준화, beam homogenizing, 광속축소, 광유도 등이 어려워서 예상한 바 큰 발전이 이루어지지 못하고 있다. 이 난제를 해결할 수 있는 가능성이 모세관 광유도광학에서 엿보이기에 여기에 소개하여 광학, 레이저 플라즈마 등을 연구하는 회원들의 관심을 끌고자 한다.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.147-156
• /
• 1995

The change of microstructure in the bonded interlayer and tensile properties of joints were studied for liquid phase diffusion bonding using STS-310 and Incoloy-825 as base metal and base metal+B alloy as insert inetal. Main experimental results obtained in this study are as follows. 1) The optimum amount of B addition into the insert metal was found to be about 4mass%. 2) When isothermal solidification was completed, the microstructure in the bonded interlayer was the same with that of the base metal because of the grain boundary migration in the bonded interlayer. 3) All of the tensile specimen fractured at base metal and joints bonded at optimum condition exhibited tensile properties in excess of base metal requirements. 4) It was determined that fine car-borides and bordes such as M$_{23}$(C,B)$_{6}$, Cr$_{2}$B, and CrB in STS-310S and TiB in Incoloy-825 exist at the grain boundary around bonded interlayer. These precipitates almost disappeared after homogenizing treatment at 1373K for 86.4ks.s.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.332-340
• /
• 2003

Crosslinked poly(methyl methacrylate) particles from 2.4 to $8.1{\mu}m$ in diameter were prepared by homogenized suspension polymerization. The effect of polymerization parameters such as homogenizing speed, homogenizing time and stabilizer concentration on the particle size were examined. Optical diffusion films were prepared with the crosslinked poly(methyl methacrylate) particles. The effect of film thickness, particle size, and particle size distribution on transmittance and haze of optical diffusion film was examined. Transmittance of optical diffusion film increased with increasing particle size and decreasing film thickness. Haze increased with increasing film thickness and decreasing particle size. We also found the existence of an optimum ratio for optical performance when the mixture of small particle and large particle was used.

• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.68-71
• /
• 1986

Oil in water microemulsion which has many pharmaceutical applications was prepared and evaluated. As oil sources and emulsifier, two grades of oil and egg phosphatide were used, respectively. Vacuum high shear mixing and high pressure homogenizing were performed and in the homogenizing step, effect of the number of passes in the homogenizer on the stability of microemulsion was studied, using Coulter counter, photographic microscope and pH-meter. From above results, it was concluded that the stability of microemulsion made of refined soy-bean oil was better than that of food grade soybean oil and by five passes in the homogenizer at 6,000 psi, we could make stable microemulsion with average particle diameter below $1\;{\mu}m$, with no particle above $5\;{\mu}m$ and no significant change during 6 weeks stored.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.425.2-425.2
• /
• 2002

The purpose of this study was to prepare thermo-sensitive solid-lipid nanoparticles (SLNs) with a lipid melted at human body temperature and to evaluate physicochemical properties of SLNs containing retinol. anti-wrinkle agent. as a model drug. SLNs were prepared using a high pressure homogenizing method. The SLNs were composed of retinol as a model drug. thermo-sensitive lipid (DS-CBS) as a lipid core. and egg phosphatidylcholine and Tween 80 as surfactants. Manufacturing variables such as homogenization pressure. (omitted)

• Applied Microscopy
• /
• 제4권1호
• /
• pp.5-10
• /
• 1974

본 실험에서는 여비압연이 4. 6%Mg-0.5% Mn-0.18%Cr의 알루미늄합금의 균질화처리 및 그의 기계적 성질에 마치는 영향을 조사하였다. 여비압연후 균질화 열처리된 시편은 주조상태의 시편에 비하여 실온 인장강도 및 연신률이 증가되고 있음을 보여주었다. $400^{\circ}C$의 고온 인장시험의 결과는 여비압연후 균질화열처리한 시편이 주조상태 또는 그의 균질화처리만 시행한 것에 비하여 다소 낮은 인장강도와 현저히 향상된 연신률을 소지함을 보여주었다. 여비압연후 균질화열처리된 시편의 금속현미경조직은 다른 시편들에 비해 결정입계에 ${\beta}$ 상등의 제2상이 현저히 감소되고 있음을 나타내고 있다. 시편의 결정입내 및 입계에 있어서의 주된 합금첨가원소인 Mg 분포상태를 EPMA를 사용하여 조사하였다. 이 결과는 균질화처리를 시행하기 전에 여비압연을 도입함으로써 균질화처리의 효과가 증대되고 있음을 보여주고 있다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.291-297
• /
• 2006

최근 국제 유가의 상승으로 인한 선박 운용비를 절감하기 위하여 중소형 선박에서도 저질연료유의 사용이 검토되고 있는 추세이다. 이 연구에서는 현재 중소형 선박에서 연료유로 사용중인 경유와 중유 MF380 을 혼합하여 소형선박에 사용이 가능하도록 제조한 혼합연료유인 MF30 연료유에 대하여 그 물리 화학적 특성을 분석하고 정제처리 및 연료유첨가제 효과에 대해 알아보았다. 연구 결과 두가지 전처리 방식인 원심식청정기와 가열 및 균질 방식 (M.C.H) 의 효과는 다소 미약하였지만, 유동점과 인화점은 다소 낮아졌다. 연료유첨가제로 인한 개질 효과는 뚜렷이 나타나지 않았다.

• 한국정밀공학회지
• /
• 제5권4호
• /
• pp.48-58
• /
• 1988

This study was undertaken to observe the formation behavior of ferro- magnetic phase in Mn-Al-Cu Alloys. The alloy selected for this investigation was 70% Mn-29% Al-1% Cu. This pre-allyed pig was prepared to the cylinderical castings using an Induction furnace after homogenizing at $1100^{\circ}C$ for 2hr, the specimens were cooled by cooling methods. Subwequent isothermal heat treatments were followed at $550^{\circ}C$ for various periods of time at predetermined(1-1000min). The formation behavior of ferromagnetic phase was investigated by measurements of magnetic properties of the specimens at each stage of heat treatment, and optical microscopic esamination and X-Ray diffraction analyses were also employed. By this basic experimental results, the conclusions are as follows 1) In order to obtain much amount of ferromagnetic phase, the optimum average cooling rate was about 7.35-$16.4^{\circ}C$/sec($1100^{\circ}C$-$600^{\circ}C$). 2) We verified the decomposition of {\tau} phase to {\beta} -Mn and {\gamma} , as the specimens were homogenized at $1100^{\circ}C$ for 12hr, then heat-treased at $550^{\circ}C$ for 1-1000min. 3) A condition of optimum heat treatments in Mn-Al-Cu permanent mag-netic alloys showed that after homogenizing at $1100^{\circ}C$ for 2hr, the speciments were cooled in air or furnace(A) and subsequent heat treatments at $550^{\circ}C$ for 1-30min. The maximum magnetic properties were measured as follows: Air cooling; Br=1200(Gause), bHc=100(oe), (BH)max=0.07(MGOe) Furnace cooling(A);Br=950(Gauss), bhe=80(Oe), (BH)max=0.05(MGOe)

• 한국식품과학회지
• /
• 제22권3호
• /
• pp.312-318
• /
• 1990

두유제품을 저장하는 동안 단백질 등의 침전과 지방질의 크림층이 분리되는 현상에 미치는 두유제조 조건의 영향을 검토하기 위해서 분쇄, 균질처리 및 열처리조건이 두유의 현탁안정성에 미치는 영향을 조사하였다. 먼저 $20^{\circ}C$의 물로 마쇄한 것을 blanching시 온도에 반비례하여 질소 용해도지수가 현저히 감소하였으나 $80^{\circ}C$의 물로 마쇄하는 경우 그 감소폭이 $20^{\circ}C$의 경우보다 적었다. 침지 대두를 분쇄하여 단백질 입자가 $53{\mu}$에서 $8{\mu}$으로 작아질수록 침전량이 감소하여 두유의 현탁안정성이 증가하였고 균질처리를 1회한 것보다는 2회 반복처리 한 것이 안정성이 증가하였으며 1회 처리시는 입자의 크기에 따라 차이가 심하였지만 2회 처리시는 그 차이가 감소되었다. 균질처리시 1단계 처리압력이 $200kg/cm^2$까지는 안정성이 증가하였고 팜유를 첨가하여 균질처리를 할 때의 온도가 $80^{\circ}C$까지 온도를 높일수록 안정성이 증가하였다. 두유제품을 살균할 때 열처리온도가 $120{\sim}125^{\circ}C$에서 30분 이상 열처리시에는 안정성이 급격히 감소되었다.