• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.505-510
• /
• 2000

In this investigation, we fabricated RBSN (Reaction Bonded Silicon Nitride) using the static nitriding system which could be advantageous for commercialization. Firstly, Si compacts of different sizes were made, and then nitridation rates were investigated as a function of added static gas pressure. The reaction schedule was obtained by pre-experiments. In case of small samples, the variation of ${\alpha}$, ${\beta}$ phases between the inside and the outside region of the specimens was examined after the samples were nitrided under 1 bar and 1.5 bar reaction pressure. On the other hand, large samples of Si compact with the size of 36 mm for diameter and 23 mm for thickness were nitrided for 26 hours of the total nitridation time, which showed a complete and homogeneous nitriding reaction from the outside to the inside of the samples, although the time was considerably shorter than that needed for convertional nitridation. Nitridation rates obtained at the early stage of reaction were proportional to the reaction gas pressures. The sequences of the nitridation reaction with the thickness were as follows 1) the outside, 2) the inside and 3) the intermediate area of the specimen. These results wer eobtained from the coloration of cross sectioned specimens that had various nitridation rates. Total nitriding reaction kinetics was controlled by chemical reaction, not by diffusion of the nitrogen gas.

• Structural Engineering and Mechanics
• /
• 제58권3호
• /
• pp.515-532
• /
• 2016

The elastoplastic response of functionally graded material (FGM) beams resting on a nonlinear elastic foundation to an eccentric axial load is investigated by using the finite element method. The FGM is assumed to be formed from ceramic and metal phases with their volume fraction vary in the thickness direction by a power-law function. A bilinear elastoplastic behavior is assumed for the metallic phase, and the effective elastoplastic properties of the FGM are evaluated by Tamura-Tomota-Ozawa (TTO) model. Based on the classical beam theory, a nonlinear finite beam element taking the shift in the neutral axis position into account is formulated and employed in the investigation. An incremental-iterative procedure in combination with the arc-length control method is employed in computing the equilibrium paths of the beams. The validation of the formulated element is confirmed by comparing the equilibrium paths obtained by using the present element and the one available in the literature. The numerical results show that the elastoplastic post-buckling of the FGM beams is unstable, and the post-buckling strength is higher for the beams associated with a higher ceramic content. Different from homogeneous beams, yielding in the FGM beam occurs in the layer near the ceramic layer before in the layer near metal surface. A parametric study is carried out to highlight the effect of the material distribution, foundation support and eccentric ratio on the elastoplastic response of the beams.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.945-964
• /
• 2014

In this paper, we investigate the performance of Signal to Leakage and Noise Radio (SLNR) based user scheduling in uplink of multi-cell with large-scale antenna system. Large antenna array is desired to improve the performance in future system by providing better beamforming capability. However, some studies have found that the signal channel is 'hardened' (becomes invariant) when the antenna number goes extremely large, which implies that the signal channel aware user scheduling may have no gain at all. With the mathematic tool of order statistics, we analyzed the signal and interference terms of SLNR in a homogeneous multicell network. The derived distribution function of signal and interference shows that the leakage channel's variance is much more influential than the signal channel's variance in large-scale antenna regime. So even though the signal channel is hardened, the SLNR-based scheduling can achieve remarkable multiuser diversity (MUD) gain due to the fluctuation of the uplink leakage channel. By providing the final SINR distribution, we verify that the SLNR-based scheduling can leverage MUD in a better way than the signal channel based scheduling. The Monte Carlo simulations show that the throughput gain of SLNR-based scheduling over signal channel based scheduling is significant.

• 한국위성정보통신학회논문지
• /
• 제9권3호
• /
• pp.22-26
• /
• 2014

본 연구에서는 액정의 수직배향을 달성하기 위해서 특별히 제조된 폴리스타일렌 박막에 다양한 이온빔을 조사하는 방법을 사용하였다. 일반적으로 폴리스타일렌 수지는 통상의 폴리이미드 계열의 수지에 비해서 박막코팅을 하였을 때 보다 우수한 투과율을 나타내므로, 투과형 디스플레이로 사용되는 LCD의 배향막 재료로 더 적합하다고 생각되었다. 특히 고휘도이면서 저전력 사양을 달성하여야 하는 휴대용 디스플레이에서의 응용가능성이 기대되었다. 그러나, 일반적인 러빙법에 의한 배향처리에 대해서는 액정분자의 배향성이 폴리이미드 계열의 재료에 비해서 열등하여 사용되지 못하였다. 본 연구에서는 폴리스타일렌 계열의 박막재료를 배향막으로 가공함에 있어서 새로운 이온빔 조사법에 의한 비접촉식 배향법을 사용하였으며, 배향성과 액정분자의 프리틸트각 특성에 대해서 정량적인 결과를 얻을 수 있었다. 실험에서는 폴리스타일렌 수지에 이온빔의 조사시간을 15초까지 변화시키면서 액정분자의 배향성 및 프리틸트각의 특성을 측정하였다. 측정결과 스마트폰 및 휴대용 정보단말기 등의 디스플레이에 적합한 고투과율 액정표시소자의 구현이 가능하였다.

• Journal of Radiation Protection and Research
• /
• 제1권1호
• /
• pp.22-30
• /
• 1976

The perturbation of dose distribution adjacent to cavities in high energy electron has shown that the percentage of dose increase varies markedly as a function of the build-up layer, the length and thickness of the cavities, and the electron energy. The dose distribution showed that cavities similar in size to those encountered in the head and neck measured by industrial film dosimetry and corrected by ionization chambers. The most increased doses by measuring are resulted in a localized dose of up to 130% of that measured at the depth of maximum dose within a homogeneous tissue equivalent phantom. The measured values and correction factors of dose perturbation due to air cavities showed in diagrams and would be summarized as follows. 1. In $8{\sim}12MeV$ electron beams, the most marked dose is observed when the build-up layer thickness is 0.5cm and cavity volume is $2{\times}2{\times}2cm^3$. 2. The highest dose point is located under cavity when the energy is increased and cavity length is longer. 3. The cavity length at which the maximum percentage dose occurs decreases with increasing energy. 4. The highest percentage cavity doses are obtained when the energy is high, the build-up layer is thin, the thickness of the cavity is large, and the length of the cavity is approximately 1 to 3cm. 5. The doses of upper portion of cavity are less than the standard dose distribution as 5 to 10%. 6. The maximum range of electron beam are extended as much as thickness of cavity. 7. A cavity having a length of 5cm closely approximates a cavity of infinite length.

• 한국컴퓨터정보학회논문지
• /
• 제10권6호
• /
• pp.345-354
• /
• 2005

이동매니퓰레이터는 -이동로봇과 작업로봇이 직렬로 결합된 형태 - 작업 공간 밖에 존재하는 작업에 대하여 높은 성능으로 작업을 수행할 수 있으므로 고정 베이스 구조의 매니이퓰레이터에 비하여 다양한 작업 환경에서 유용하다. 임의의 위치에 있는 물체를 인식하기 위하여 이동매니퓰레이터에 부착된 2자유도의 능동카메라에 의해 입력되는 영상과 능동카메라의 기구학적 관계에 기초를 두는 직각좌표계를 이용하여 물체의 위치와 이동로봇의 위치를 구하는 방법을 제시한다. 동차행렬을 이용하여 이미지정보와 물체의 위치를 해석하므로 이동매니퓰레이터의 최적경로를 생성한다. 최종적으로, 물체의 인식을 통하여 작업로봇을 제어할 수 있는 조인트변수의 값을 계산한다. 제안된 방법은 제작된 이동매니퓰레이터로 시뮬레이션과 실험을 통하여 확인되어지고 논의된다.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.217-222
• /
• 2010

Zirconium diboride (ZrB2) and mixed diboride of (Zr0.7Ta0.3)B2 containing 30 vol.% silicon carbide (SiC) composites were prepared by hot-pressing at $1800^{\circ}C$. XRD analysis identified the high crystalline metal diboride-SiC composites at $1800^{\circ}C$. The TaB2 addition to ZrB2-SiC showed a slight peak shift to a higher angle of 2-theta of ZrB2, which confirmed the presence of a homogeneous solid solution. Elastic modulus, hardness and fracture toughness were slightly increased by addition of TaB2. A volatility diagram was calculated to understand the oxidation behavior. Oxidation behavior was investigated at $1500^{\circ}C$ under ambient and low oxygen partial pressure (pO2~10-8 Pa). In an ambient environment, the TaB2 addition to the ZrB2-SiC improved the oxidation resistance over entire range of evaluated temperatures by formation of a less porous oxide layer beneath the surface SiO2. Exposure of metal boride-SiC at low pO2 resulted in active oxidation of SiC due to the high vapor pressure of SiO (g), and, as a result, it produced a porous surface layer. The depth variations of the oxidized layer were measured by SEM. In the ZrB2-SiC composite, the thickness of the reaction layer linearly increased as a function of time and showed active oxidation kinetics. The TaB2 addition to the ZrB2-SiC composite showed improved oxidation resistance with slight deviation from the linearity in depth variation.

• Carbon letters
• /
• 제11권3호
• /
• pp.176-183
• /
• 2010

PAN precursor fibers were produced via wet-spinning process, and effects of polymerization and spinning processes, especially the stretching process, were investigated on mechanical properties and micro-morphologies of precursor fibers. An increase in molecular weight, dope solid and densification and a decrease in surface defects were possible by controlling polymerization temperature, the number of heating rollers for densification and the jet stretch ratio, which improved the mechanical properties of precursor fibers. The curves for strength, modulus, tensile power and diameter as a function of stretch ratio can be divided into three stages: steady change area, little change area and sudden change area. With the increase of stretch ratio, the fiber diameter became smaller, the degree of crystallization increased and the structure of precursor fibers became compact and homogeneous, which resulted in the increase of strength, modulus and tensile power of precursor fibers. Empirical relationship between fiber strength and stretch ratio was studied by using the sub-cluster statistical theory. It was successfully predicted when the strengths were 0.8 GPa and 1.0 GPa under a certain technical condition, the corresponding stretch ratio of the fiber were 11.16 and 12.83 respectively.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.566-572
• /
• 2016

소프트웨어 개발과정에서 소프트웨어 신뢰성은 매우 중요한 문제 중에 하나이다. 소프트웨어 고장현상을 분석하기 위하여 비동질적인 포아송과정에서 고장 발생 추이를 의미하는 위험함수가 고장시간에 독립적으로 일정하거나, 종속적인 경우, 즉 비-증가 또는, 비-감소하는 속성을 가질 수 있다. 본 연구에서는 소프트웨어 제품 테스팅 과정에서 고장 수명분포로서 어랑분포의 다양한 형상모수를 고려한 소프트웨어 개발 비용 분석에 대하여 연구되었다. 소프트웨어 고장현상을 분석하기 위하여 모수추정은 최우추정법이 사용되었다. 따라서 본 논문에서는 어랑분포의 형상모수를 고려한 소프트웨어 개발비용모형 분석을 위하여 소프트웨어 고장간격 시간자료를 이용하여 비교 및 평가하였다. 그 결과 형상모수에 따른 비용곡선을 비교 하였을 때 형상모형이 작을수록 비용이 많고 소프트웨어 최적 방출시간이 지연 됨을 알 수 있었다. 이 연구를 통하여 소프트웨어 개발자들에게 소프트웨어 형상모수에 따른 개발 비용을 탐색하는데, 기본적으로 도움을 줄 수 있는 사전정보의 역할을 할 수 있을 것으로 판단된다.

• Archives of Plastic Surgery
• /
• 제35권5호
• /
• pp.607-610
• /
• 2008

Purpose: Salivary duct carcinoma(SDC) is uncommon but high grade adenocarcinoma arising in the ductal epithelium of salivary glands. SDC is characterized by distinctive clinical and pathologic features. The most important histologic aspect of this neoplasm is its resemblance to ductal carcinoma of the breast. Clinically SDC is defined by cervical lymph node involvement and distant metastasis with a high rate of recurrence and mortality. We described some of the clinical and pathological features of SDC and the management using case report for our patient. Methods: We present a case of a 40-year-old male with 2-year history of a swelling arising in his left preauricular region. There was a single painless, firm and solid $2{\times}1.5cm$ mass in the left parotid area. Facial nerve function was intact and no cervical lymph node were palpable. In August 2005, we found out $1.7{\times}1.8cm$ sized cystic, nodular lesions that were located in the superficial lobe of left parotid gland through Computed tomography. And then superficial parotidectomy and postoperative radiation therapy were performed in Jan 2007. Results: Pathologically, the specimen were consisted of homogeneous, chondoid to myxoid type of tissues. It was yellow mass that has multiloculated cystic lesions. In postoperative PET(Positiron emission tomography) CT, there was no evidence of uptaking FDG(Fluorodeoxyglucose) into the deep layers of parotid gland and distant metastasis were not seen. Conclusion: Salivary duct carcinoma(SDC) is a rare but high grade adenocarcinoma related to pleomorphic adenocarcinoma. The prognosis of SDC can be different according to the type of tumor such as mucoepidermoid adenocarcinoma, adenoid duct carcinoma and acinar cell carcinoma. So we need to study more carefully for accurate diagnosis in early stage of diagnosis. Although radiotherapy has not yet proven to be a significant factor in overall survival, the combination of parotidectomy and postoperative radiation therapy can lead to more favorable results in treating of SDC.