• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.121-129
• /
• 2004

본 연구에서는 균질 단순사면의 안정검토 시 간편하게 이용할 수 있는 사면안정도표를 제안하였다. 기존의 사면안정도표는 대부분 한계평형해석에 근거하고 있으나 잘 알려진 바와 같이 한계평형해석은 역학적으로 엄밀한 해석기법이 아니다. 반면 가상일방정식과 소성이론의 경계정리를 이용한 한계해석은 계산이 간단하면서도 역학적 엄밀성이 보장되어 사면과 같은 지반구조물의 안정해석에 적합한 해석기 법이다. 특히 유한요소와 최적화기법을 적용한 수치한계해석은 다양한 사면조건을 반영할 수 있을 뿐 만 아니라 안정해의 최적값을 효율적으로 산정할 수 있는 장점이 있다. 본 연구에서는 유효응력 개념의 수치한계해석기법을 개발하고 다양한 사면조건에 대한 해석을 수행하여 역학적으로 엄밀한 사면안정도표를 제안하였다. 유효응력해석을 위한 간극수압의 영향은 기존의 사면안정도표와 같이 간극 수압비를 적용하여 고려하였다. 제안된 안정도표와 Spencer 안정도표를 비교한 결과 Spence. 안정도표를 적용하여 사면설계를 수행할 경우 안전측 설계가 됨을 알 수 있었다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권4호
• /
• pp.411-422
• /
• 2002

최근에 다중 에이전트를 기반으로 하는 가상 병렬 컴퓨팅 시스템에 관한 적극적인 연구가 이루어지고 있다. 가상 병렬 컴퓨팅 시스템은 많은 계산을 요구하는 복잡한 문제들을 해결하기 위해 고비용수퍼 컴퓨터를 사용하는 대신에, 인터넷상에 산재되어 있는 개인용 컴퓨터 혹은 워크스테이션을 사용한다. 가상 병렬 컴퓨팅 시스템은 인터넷상에 이용 가능한 자원에 의존하여 동질 혹은 이질형의 컴퓨터들로 구성될 수 있다. 본 논문에서는 IBM Aglets를 기반으로 하는 가상 병렬 컴퓨팅 환경에서 작업자 에이전트와 작업 패키지를 효율적으로 분산하는 새로운 방법을 제안한다. 기존의 방법들은 작업자 에이전트와 작업 패키지를 분산하기 위해서 주로 마스터/슬레이브 유형을 사용한다. 그러나 이러한 방법에서 에이전트의 수가 증가하게되면 중앙 마스터에서 작업부하가 급속하게 증가된다. 이러한 문제에 대한 해결로서 본 논문에서는 작업자 에이전트와 작업 패키지의 분산을 작업자 에이전트에게 위임하는 방법을 사용한다. 제안된 방법은 가상 병렬 컴퓨팅 시스템에서 다양한 방식으로 평가되었으며, 그 결과는 기존의 방법에 비해서 괄목할 만한 수준으로 개선되었다.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.852-856
• /
• 2014

$BaTiO_3$ nano powder can be synthesized by hydrate salt method at $120^{\circ}C$ in air. Decreasing the thickness of thick film, the nano dielectric particle is needed in electronic ceramics. However, the synthesis of $BaTiO_3$ nano particle at low temperature in air and their mechanism were not reported enough. And ultrasonic treatment can be tried because of low temperature process in air. Therefore, in this study, the $BaTiO_3$ nano powder was synthesised with the synthesis time and ultrasonic treatment at $120^{\circ}C$ in air. In the synthesis process, the effects of process were evaluated. From the experimental observation, the synthesis mechanism was proposed. The homogeneous $BaTiO_3$ particle was synthesised by KOH salt solution at $120^{\circ}C$ for 1hour. It was conformed that the ultrasonic treatment effected on the increase of synthesis rate. After cutting the salt powder using FIB, $BaTiO_3$ nano particles observed homogeneously in the cross-section of the salt particle.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.39-44
• /
• 1998

$LiCoO_2$ powder was synthesized in an aqueous solution by a sol-gel method and used as a cathode active material for a lithium ion rechargeable battery. The layered $LiCoO_2$ powders were prepared by igniting in air for 12 hrs at 600 ℃ $(600-LiCoO_2)$ and 850 ℃ $(850-LiCoO_2)$. The structure of the $LiCoO_2$ powder was assigned to the space group R bar 3 m (lattice parameters a=2.814 Å and c=14.04Å). The SEM pictures of $600-LiCoO_2$ revealed homogeneous and fine particles of about 1 μm in diameter. Cyclic voltammograms (CVs) of $600-LiCoO_2$ electrode displayed a set of redox peaks at 3.80/4.05 V due to the intercalation/deintercalation of the lithium ions into/out of the $LiCoO_2$ structure. CVs for the $850-LiCoO_2$ electrode had a major set of redox peaks at 3.88/4.13 V, and two small set of redox peaks at 4.18/4.42 V and 4.05/4.25 V due to phase transitions. The initial charge-discharge capacity was 156-132 mAh/g for the $600-LiCoO_2$ electrode and 158-131 mAh/g for the $850-LiCoO_2$ electrode at the current density of 0.2 mA/cm2. The cycleability of the cell consisting of the $600-LiCoO_2$ electrode was better than that of the $850-LiCoO_2$. The diffusion coefficient of the $Li^+$ ion in the $600-LiCoO_2$ electrode was calculated as $4.6{\times}10^{-8}\; cm^2/sec$.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.141-162
• /
• 2015

The magneto-rheological visco-elastomer (MRVE) is used as a smart core to control the stochastic micro-vibration of a sandwich plate with supported mass. The micro-vibration response of the sandwich plate with MRVE core and supported mass under stochastic support motion excitations is studied and compared to evaluate the vibration suppression capability. The effects of the supported mass and localized magnetic field on the stochastic micro-vibration response of the MRVE sandwich plate are taken into account. The dynamic characteristics of the MRVE core in micro-vibration are described by a non-homogeneous complex modulus dependent on vibration frequency and controllable by applied magnetic fields. The partial differential equations for the coupled transverse and longitudinal motions of the MRVE sandwich plate with supported mass are derived from the dynamic equilibrium, constitutive and geometric relations. The simplified ordinary differential equations are obtained for the transverse vibration of the MRVE sandwich plate under localized magnetic fields. A frequency-domain solution method for the stochastic micro-vibration response of sandwich plates with supported mass is developed based on the Galerkin method and random vibration theory. The expressions of frequency-response functions, response power spectral densities and root-mean-square velocity responses of the plate in terms of the one-third octave frequency band are obtained for micro-vibration evaluation. Finally, numerical results are given to illustrate the large response reduction capacity of the MRVE sandwich plate with supported mass under stochastic support motion excitations, and the influences of MRVE parameters, supported mass and localized magnetic field placement on the micro-vibration response.

• Nuclear Engineering and Technology
• /
• 제30권2호
• /
• pp.128-139
• /
• 1998

The effect of UO$_2$ powder property and oxygen potential on characteristics of sintered UO$_2$-Gd$_2$O$_3$ fuel pellets has been investigated. Two types of powder, mixture of AUC-UO$_2$ and Gd$_2$O$_3$powders (type I) and mixture of ADU-UO$_2$ and Gd$_2$O$_3$powders (type II), have been prepared, pressed, and sintered at 168$0^{\circ}C$ for 4 hours. Four sintering atmospheres with different mixing ratios of $CO_2$to H$_2$ gas ranging from 0 to 0.3 have been used. UO$_2$-Gd$_2$O$_3$ fuel has lower sintered density than UO$_2$ fuel, and the density drop is larger for powder type I than for powder type II. As the oxygen potential increases, the sintered density of UO$_2$-2wt% Gd$_2$O$_3$pellets increases but that of UO$_2$-10wt% Gd$_2$O$_3$ pellets decreases. It is found that pores are newly formed in UO$_2$-10wt% Gd$_2$O$_3$ pellets in accordance with the decrease in density. The grain size of UO$_2$-Gd$_2$O$_3$ fuel increases and a short range G4 distribution becomes homogeneous as the oxygen potential increases. A long range ed distribution and grain structure are inhomogeneous for powder type II. The lattice parameter of (U,Gd)O$_2$solid solution decreases linearly with Gd$_2$O$_3$ content. The dependence of UO$_2$-Gd$_2$O$_3$fuel characteristics on powder type and sintering atmosphere have been discussed.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제57권4호
• /
• pp.329-352
• /
• 2018

This study analyzed each process of demand analysis(A), design(D), development(D), implementation(I) and evaluation(E) of the program to support mathematics learning of students with under-achievement of math in high school. To analyze the demand, a survey was conducted on 235 high school math teachers and 334 high school students who were under-achieved in mathematics. To design and develope the program, this study linked middle school math to high school math so that the students with poor math learning could easily participate in mathematics learning. The programs developed in this study were implemented in three high schools, where separate classes were organized and run for students with poor math learning. The evaluation of the programs developed in this study was done in two ways. One was a quantitative evaluation conducted by five experts, and the other was a qualitative evaluation conducted through interviews with teachers and students participating in the program. This study found that students with poor mathematics learning were more motivated to learn, started to do mathematics, and encouraged to be confident when using learning materials that included easy problems and detailed solutions that they could solve themselves. From these results, the following three implications can be derived in developing a program to support students who are experiencing poor mathematics learning in high school. First, we should develop learning materials that link middle school mathematics to high school mathematics so that students can supplement middle school mathematics related to high school mathematics. Second, we need to develop learning materials that include detailed solutions to basic examples and include homogeneous problems that can be solved while looking at the basic example's solution process. Third, we should avoid the challenge of asking students who are under-achieving to respond too openly.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.101-107
• /
• 2022

본 논문에서는 지오폴리머의 상변화를 관찰하기 위하여 나노인덴테이션 데이터를 가우시안 믹스쳐 모델로 분석하는 방법을 제시하였다. 지오폴리머는 일반 시멘트 대비 CO₂ 발생량을 줄일 수 있어 시멘트 대체 재료로써 많은 연구가 이루어지고 있다. 기존 연구들로부터 최적의 실리콘/알루미늄 비율을 찾았으나 1.8 초과에서 압축강도 저하의 원인은 아직 불분명하다. 본 연구에서는 실리콘/알루미늄 비율이 재료에 미치는 영향을 조사하고자 나노인덴테이션 실험을 수행하였다. 실험 결과를 가우시안 믹스쳐 모델로 상분석하였고, 실리콘/알루미늄 비율이 증가할수록 재료가 균질거동을 하는 것을 관찰할 수 있었다. 본 연구결과는 강도저하를 규명하는데 직접적인 근거로 활용될 수 있을 것으로 기대된다.

• Advances in aircraft and spacecraft science
• /
• 제8권4호
• /
• pp.345-372
• /
• 2021

The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.407-415
• /
• 2022

Surface coating of cathodes is an essential process for all-solid-state batteries (ASSBs) based on sulfide electrolytes as it efficiently suppresses interfacial reactions between oxide cathodes and sulfide electrolytes. Based on computational calculations, Li₃PO₄ has been suggested as a promising coating material because of its higher stability with sulfides and its optimal ionic conductivity. However, it has hardly been applied to the coating of ASSBs due to the absence of a suitable coating process, including the selection of source material that is compatible with ASSBs. In this study, polyphosphoric acid (PPA) and (NH₄)₂HPO₄ were used as source materials for preparing a Li₃PO₄ coating for ASSBs, and the properties of the coating layer and coated cathodes were compared. The Li₃PO₄ layer fabricated using the (NH₄)₂HPO₄ source was rough and inhomogeneous, which is not suitable for the protection of the cathodes. Moreover, the water-based coating solution with the (NH₄)₂HPO₄ source can deteriorate the electrochemical performance of high-Ni cathodes that are vulnerable to water. In contrast, when an alcohol-based solvent was used, the PPA source enabled the formation of a thin and homogeneous coating layer on the cathode surface. As a consequence, the ASSBs containing the Li₃PO₄-coated cathode prepared by the PPA source exhibited significantly enhanced discharge and rate capabilities compared to ASSBs containing a pristine cathode or Li₃PO₄-coated cathode prepared by the (NH₄)₂HPO₄ source.