• Journal of Powder Materials
• /
• v.11 no.5
• /
• pp.363-368
• /
• 2004

In the present study, the focus is on the analysis of the effect of the mold dimensions on the temperature distribution of a die during plasma activated sintering. The temperature distribution of a cylindrical mold with various dimensions was measured using K-type thermocouples. The temperature homogeneity of the die was studied based on the direction and dimensions of the die. A temperature gradient existed in the radial direction of the die during the plasma activated sintering. Also, the magnitude of the temperature gradient was increased with increasing sintering temperature. In the longitudinal direction, however, there was no temperature gradient. The temperature gradient of the die in the radial direction strongly depended on a ratio of die volume to punch area.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.3
• /
• pp.31-42
• /
• 2004

This research seeks to derive the design rainfalls through the L-moment with the test of homogeneity, independence and outlier of data on annual maximum daily rainfall at 38 rainfall stations in Korea. To select the appropriate distribution of annual maximum daily rainfall data by the rainfall stations, Generalized Extreme Value (GEV), Generalized Logistic (GLO), Generalized Pareto (GPA), Generalized Normal (GNO) and Pearson Type 3 (PT3) probability distributions were applied and their aptness were judged using an L-moment ratio diagram and the Kolmogorov-Smirnov (K-S) test. Parameters of appropriate distributions were estimated from the observed and simulated annual maximum daily rainfall using Monte Carlo techniques. Design rainfalls were finally derived by GEV distribution, which was proved to be more appropriate than the other distributions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2242-2246
• /
• 2009

In this paper, a homogeneous dual composite right/left-handed (D-CRLH) transmission line (TL) is proposed by using a defected ground structure (DGS) on the ground plane. In order to satisfy a homogeneity condition of metamaterial, a subwavelength unit cell is designed by way of a spiral DGS and a meander stub. From a dispersion diagram, it is expected that the frequency bands for the left-handed (LH) property is 3.5 - 4.4 GHz. At 3.8 GHz in the LH band, backward propagating phenomenon is observed from full-wave analysis. The experimental results show that the proposed TL has a stop-band in 1.75 - 3.6 GHz.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.862-864
• /
• 2003

Thresholding is a popular image segmentation method that converts a gray-level image into a binary image. The selection of optimum threshold has remained a challenge over decades. Many image segmentation techniques are developed using information about image in other space rather than the image space itself. Most of the technique based on histogram analysis information-theoretic approaches. In this paper, the criterion function for finding optimal threshold is developed using an intensity-based classuncertainty (a histogram-based property of an image) and region-homogeneity (an image morphology-based property). The theory of the optimum thresholding method is based on postulates that objects manifest themselves with fuzzy boundaries in any digital image acquired by an imaging device. The performance of the proposed method is illustrated on experimental data obtained by W-band millimeter-wave radiometer image under different noise level.

• Investigative Magnetic Resonance Imaging
• /
• v.7 no.2
• /
• pp.137-143
• /
• 2003

Purpose : B1 field of birdcage RF (radiofrequency) coil that is used most for brain imaging in magnetic resonance imaging (MRI) decreases toward endring from the coil center. We investigated how much RE B1 homogeneity effect the endcap shield brings form the coil center as it towards to endcap region. Materials and Methods : We compared RF B1 field distribution by each finite difference time domain (EDTD) simulations for lowpass, highpass and hybrid birdcage RF coils. We selected the highpass birdcage RF coil that was the highest RF B1 field condition as simulation result, and studied how much RF B1 homogeneity effect was occurred when endcap shield was applied to endring area. Results : B1 field of the highpass birdcage RF coil was higher than other birdcage RF coil types as simulation result. However, the RF B1 homogeneity was lower than other coil types. RE B1 field of highpass birdcage RF coil with endcap shield is similar with RF B1 field of hybrid birdcage RF coil and the overall RE B1 homogeneity in sagittal direction was better. Conclusion In this paper, proposed method can apply improving RF B1 homogeneity of RF coil in clinical examination.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.181-188
• /
• 2004

Structural analysis for materials containing regularly spaced in-homogeneities is usually executed by using averaged material properties. For the homogenization process, a unit cell is defined and loaded somehow, and its response is investigated to evaluate the properties. The imposed loading conditions should accord to the behavior of unit cell immersed in the macroscopic structure in order to guarantee the accuracy of the effective properties. Each unit cell shows periodic variation of strain if the material is loaded uniformly, and in this study, direct implementation of this characteristic behavior is attempted on FE models of unit cell. Conventional finite element analysis tool can be used without any modification, and the boundary of unit cell is constrained in a way that the periodicity is satisfied. The proposed method is applicable to skew arrayed in-homogeneity problems. The flexibility matrix relating tonsorial stress and strain components in skewed rectilinear coordinate system is transformed so that the required engineering constants can be evaluated. Effective properties are computed for the materials with square and skew arrayed circular holes, and its accuracy is examined.

• Atmosphere
• /
• v.17 no.1
• /
• pp.17-26
• /
• 2007

The station relocations, the replacement of instruments, and the change of a procedure for calculating derived climatic quantities from observations are well-known nonclimatic factors that seriously contaminate the worthwhile results in climate study. Prior to embarking on the climatological analysis, therefore, the quality and homogeneity of the utilized data sets should be properly evaluated with metadata. According to the metadata of the Korea Meteorological Administration (KMA), there have been plenty of changes in the procedure computing the daily mean values of temperature, humidity, etc, since 1904. For routine climatological work, it is customary to compute approximate daily mean values for individual days from values observed at fixed hours. In the KMA, fixed hours were totally 5 times changed: at four-hourly, four-hourly interval with additional 12 hour, eight-hourly, six-hourly, three-hourly intervals. In this paper, the homogeneity in the daily mean temperature dataset of the KMA was assessed with the consistency and efficiency of point estimators. We used the daily mean calculated from the 24 hourly readings as a potential true value. Approximate daily means computed from temperatures observed at different fixed hours have statistically different properties. So this inhomogeneity in KMA climate data should be kept in mind if you want to analysis secular aspects of Korea climate using this data set.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.235-243
• /
• 1999

Vibration analysis for some of simple supported antisymmetric composite laminated plate loaded uniformly distributed axial force and attached mass was carried out. Because it is complicated to analysis this type of plate by theory of antisymmetric laminate, possibility for application of theory of special orthotropic laminate was studied, and natural frequency of laminated plate attached mass was calculated. Stiffness $B_{16}$, $B_{26}$, $D_{16}$, $D_{26}$ for this type of antisymmetric laminated plate converge on zero as the number of ply increases and it is possible to use classical theory by reason that considered plate has quasi-homogeneity without relevance to variation of angle. Difference between results by theory of antisymmetric and special orthotropic laminate is 0.36~1.96%, therefore it is convenient to analyze this by use of theory of special orthotropic laminate. When composite laminated plate with attached mass is analyzed range that was able to neglect self-weight of plate was proposed.

• Advances in Computational Design
• /
• v.5 no.2
• /
• pp.111-125
• /
• 2020

The flow behavior of polymer melts within a slit die is an important consideration when designing a die geometry. The quality of the extruded polymer product can be determined through an evaluation of the flow homogeneity, wall shear rate and pressure drop across the central height of the die. However, mathematical formulations cannot fully determine the behavior of the flow due to the complex nature of fluid dynamics and the nonlinear physical properties of the polymer melts. This paper examines two slit die geometries in terms of outlet velocity uniformity, shear rate uniformity at the walls and pressure drop by using the licensed computational fluid dynamics package, Ansys POLYFLOW, based on the finite element method. The Carreau-Yasuda viscosity model was used for the rheological properties of the polypropylene. Comparative analysis of the simulation results will conclude that the modified die design performs better in all three aspects providing uniform exit velocity, uniform wall shear rates, and lower pressure drop.

• Plant Resources
• /
• v.1 no.1
• /
• pp.26-32
• /
• 1998

This paper describes the variations in eight agronomic traits in three unadapted local landraces and an inbred cultivar of corn. To compare the agronomic traits in field evaluation with molecular marker evaluation the genotypes of the plant introduction were also checked by 4 microsatellite-SSR loci. The variations of the eight agronomic traits were higher in the local landrades than in the inbred line. which was substantiated by the high genetic variation in the landrades with microsatellite-SSR loci. The level of genetic variation was also different between landraces. Since the genetic evaluation can be easily quantified by the analysis of microsatellite-SSR loci. the threshold level of genetic homogeneity in the population for parental lines in breeding program can be determined and the effort of maintaining the landrace population would be alleviated. As an example in our analysis. the entry from Whachon should not need the same number of selfing generations as the other two landraces to get the level of inbred state. Since this line showed lowest intra-genetic variation within the population.