• 분석과학
• /
• 제6권2호
• /
• pp.207-215
• /
• 1993

소결첨가제($3Al_2O_3{\cdot}5Y_2O_3$, YAG)를 질화규소에 공침방법으로 첨가하여, 통상적인 기계적 혼합 방법으로 준비된 혼합분말에 대한 혼합균일성과 소결 및 기계적 특성을 조사, 비교하였다. 준비된 혼합분말들을 SIMS를 사용하여 분말 표면과 내부의 조성을 비교분석한 결과, 공침법을 사용할 경우 소결첨가제가 $Si_3N_4$ 표면에 피복된 상태로 존재하고 있음을 나타내어 기계적 혼합에 비해 우수한 균일혼합효과를 얻을 수 있음을 확인하였다. 공침법에 의한 균일혼합효과는 $Si_3N_4$ 분말소결체의 소결밀도 및 미세구조의 개선을 수반하여 기계적 강도의 향상을 이룰 수 있음을 확인하였다.

• 대한방사선치료학회지
• /
• 제22권1호
• /
• pp.47-51
• /
• 2010

목 적: 고 에너지 양성자치료에 있어서 Air gap (환자와 Beam 사출구 사이의 거리)의 변화는 Lateral Penumbra의 증가로 불필요한 조사야를 형성할 수 있고, 치료부위에서 최대선량 증가와 최소선량 감소로 선량분포의 균질성을 저하시킬 수 있다. 이에 Air gap 변화에 따른 선량분포에 대해 비교, 연구해 보고자 한다. 대상 및 방법: 본원에서 양성자치료를 받은 Lung, Liver 환자 6명을 선정하여 크기가 다른 조사야 A와 조사야 B에서 Air gap을 2, 4, 6, 8, 10 cm로 설정하여 Proton external beam planning system을 통해 치료계획을 세웠다. Air gap에 따른 Lateral Penumbra 영역 및 DVH (Dose Volume Histogram)를 비교하고 PCTV영역의 최대선량 및 최소선량 값을 비교하였다. 또한 PCTV내에 선량의 균질성을 알기 위하여 Homogeneity index값을 비교, 분석하였다. 결 과: 각각의 조사야에서 Air gap의 변화(2, 4, 6, 8, 10 cm)에 따른 Lateral Penumbra영역을 분석한 결과 조사야 A에서 Air gap 2~10 cm변화에 따라 평균 1.36~1.75 cm까지 약 28.7%가 지속적으로 증가하였고 조사야 B에서 평균 1.36~1.79 cm까지 약 31.6%가 지속적으로 증가하였다. DVH를 분석한 결과 최대선량의 상대선량 백분율은 Air gap 2~10 cm일 때 평균 108.1%에서 평균 110.3%까지 약 2.03%가 지속적으로 증가하였고 최소선량의 상대선량 백분율은 평균 93.9%에서 평균 90.8%까지 약 3.31%가 지속적으로 감소하였다. Homogeneity index값은 평균 Air gap 2~10 cm까지 1.09~2.6으로 2배 이상 증가하였다. 결 론: 양성자 치료에 있어서 Air gap이 증가함에 따라 Lateral Penumbra 영역이 증가함을 알 수 있었고, 치료부위에서 최대선량 값의 증가와 최소선량 값의 감소로 인하여 Homogeneity index값이 증가함으로써 PCTV내에 Beam의 균질성이 떨어지는 것을 알 수 있었다. 이에 추후 양성자치료시 Air gap을 줄이기 위한 노력이 필요할 것으로 사료된다.

• Journal of the Korean Data and Information Science Society
• /
• 제21권4호
• /
• pp.651-667
• /
• 2010

항-고지혈 효과에 대한 연관 측도로 효과 인자를 고려한 헤지의 표준화된 평균차를 이용하였다. 고정효과모형을 적용하여 메타분석을 시행하였다. 그 결과 변의 콜레스테롤 농도와 총 콜레스테롤 농도 그리고 트리글리세리드 농도에서 통계적으로 유의한 감소를 보였으며, 고농도지단백 콜레스테롤 농도에서 통계적으로 유의한 증가를 보였다. 다음으로 연구 간 분산을 고려하지 않고 고정효과모형을 가정하여 분석한 모든 변수들에 대해 동질성 검정을 실행하여 연구 간의 이질성의 존재를 확인하였다. 그 결과 신장의 무게, 간의 무게, 고농도지단백 콜레스테롤, 저농도지단백 콜레스테롤, 총 콜레스테롤, 트리글리세리드 농도에서 동질성을 만족하지 않았다.

• Computers and Concrete
• /
• 제29권2호
• /
• pp.107-115
• /
• 2022

With the improvements in computer technologies, utilization of image processing techniques has increased in many areas (such as medicine, defence industry, other industries etc.) Many different image processing techniques are used for surface analysis, detection of manufacturing defects, and determination of physical and mechanical characteristics of composite materials. In this study, cementitious composites were obtained by addition of Grounded Granulated Blast-Furnace Slag (GGBFS), Styrene Butadiene polymer (SBR), and Grounded Granulated Blast-Furnace Slag and Styrene Butadiene polymer together (GGBFS+SBR). Expanded Polystyrene (EPS) beads were added to these cementitious composites in different ratios (20%, 40% and 60%). The mechanical and physical characteristics of the composites were determined, and homogeneity indexes of the composites were determined by image processing techniques to determine EPS distribution forms in them. Physical and mechanical characteristics of the produced samples were obtained by applying consistency, density, water absorption, compressive strength (7 and 28 days), flexural strength (7 and 28 days) and tensile splitting strength (7 and 28 days) tests on them. Also, visual examination by using digital microscope, and image analysis by using image processing techniques with open source coded ImageJ program were performed. As a result of the study, it is determined that GGBFS and SBR addition strengthens the adhesion sites formed as it increases the adhesion power of the mixture and helps to get rid of the segregation problem caused by EPS. As a result of the image processing analysis it is demonstrated that GGBFS and SBR addition has positive contribution on homogeneity index.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.19-25
• /
• 2000

As the tideland reclamation is done on a large scale these days, construction work is active in the coastal areas. Facilities in the coastal areas must be built with the tide characteristics taken into consideration. Thus the tide characteristics affect the overall reclamation plan. The analysis of the tide data boils down to a harmonic analysis of the hourly changes of long-term tide data and extraction of unharmonic coefficients from the results. Since considerable amount of tide data of the West Coast are available, the existing data can be collected and can be used to obtain the temporal changes of the tide by being fitted into the tide prediction model. The goal of this thesis lies in assessing whether the mean sea level used in the field agrees with the analysis results from the long-term observation data obtained with their homogeneity guaranteed. To achieve this goal, the research was conducted as follows. First the present conditions of the observation stations, the land level standard, and the sea level standard were analyzed to set up a time series model formula for representing them. To secure the homogeneity of the time series, each component was separated. Lastly the mean sea level used in the field was assessed based on the results obtained form the analysis of the time series.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.14-19
• /
• 2012

Shimming, active and/or passive, is indispensable for most MR (magnetic resonance) magnets where homogeneous magnetic fields are required within target spaces. Generally, shimming consists of two steps, field mapping and correcting of fields, and they are recursively repeated until the target field homogeneity is reached. Thus, accuracy of the field mapping is crucial for fast and efficient shimming of MR magnets. For an accurate shimming, a "magnetic" center, which is a mathematical origin for harmonic analysis, must be carefully defined, Although the magnetic center is in general identical to the physical center of a magnet, it is not rare that both centers are different particularly in HTS (high temperature superconducting) magnets of which harmonic field errors, especially high orders, are significantly dependent on a location of the magnetic center. This paper presents a new algorithm, based on a field mapping theory with harmonic analysis, to define the best magnetic center of an MR magnet in terms of minimization of pre-shimming field errors. And the proposed algorithm is tested with simulation under gaussian noise environment.

• 한국응급구조학회지
• /
• 제21권1호
• /
• pp.17-44
• /
• 2017

Purpose: This study aimed to identify the effects of cardiopulmonary resuscitation (CPR) training using a meta-analysis by effect size. Methods: The effect sizes for each variable and the overall effect size for the collected data were identified. The homogeneity verification of the effect size and the difference among the average effect sizes for each mediation variable were determined. Results: The overall average effect size for CPR training was 1.747. Homogeneity verification of the overall effect size was a Q-value of 3716.962, which was statistically significant (p=.000) when${\alpha}=.05$. CPR training showed statistically significant differences depending on age (p=.002), sex (p=.006), number of trainees (p=.000), research design (p=.000), training method (p=.027), and practical training tools (p=.000). Conclusion: CPR training can effectively improve knowledge, skills, and attitudes about CPR. The results of this meta-analysis contribute to the development of more effective educational guidelines for future CPR training and the advancement of the CPR education field.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.158-163
• /
• 2022

Purpose: We subjected scanning electron microscopic (SEM) images of the active layer of EBT3 film to texture analysis to determine the dose-response curve. Methods: Uncoated Gafchromic EBT3 films were prepared for direct surface SEM scanning. Absorbed doses of 0-20 Gy were delivered to the film's surface using a 6 MV TrueBeam STx photon beam. The film's surface was scanned using a SEM under 100× and 3,000× magnification. Four textural features (Homogeneity, Correlation, Contrast, and Energy) were calculated based on the gray level co-occurrence matrix (GLCM) using the SEM images corresponding to each dose. We used R-square to evaluate the linear relationship between delivered doses and textural features of the film's surface. Results: Correlation resulted in higher linearity and dose-response curve sensitivity than Homogeneity, Contrast, or Energy. The R-square value was 0.964 for correlation using 3,000× magnified SEM images with 9-pixel offsets. Dose verification was used to determine the difference between the prescribed and measured doses for 0, 5, 10, 15, and 20 Gy as 0.09, 1.96, -2.29, 0.17, and 0.08 Gy, respectively. Conclusions: Texture analysis can be used to accurately convert microscopic structural changes to the EBT3 film's surface into absorbed doses. Our proposed method is feasible and may improve the accuracy of film dosimetry used to protect patients from excess radiation exposure.

• Journal of Information Technology Applications and Management
• /
• 제19권1호
• /
• pp.85-100
• /
• 2012

The development of technology causes a lot of change. Many researchers have insisted that the proliferation of cyber space changes the physical space. Their insistences have been accumulated into three aspects. Firstly, the proliferation of cyber space brings out the concentration in the physical space, secondly the decentralization and lastly both at the same time. In Korea, the concentration of plastic surgery clinics has taken place in Kangnam-gu area at similar period of the Internet proliferation. In this research, we execute empirical study of whether the concentration of plastic surgery in specific areas correlates with the proliferation of cyber space or not. In order to do this, we verified homogeneity of plastic surgery websites between Kangnam-gu and Non-Kangnam-gu areas. Also, we used three statistical and data-mining techniques which are Multi-discriminant analysis, Decision tree analysis and artificial neural network analysis. As a result, there was homogeneity between two different area plastic surgery clinics websites, but there was not big heterogeneity as well. Therefore, in this case of concentration of plastic surgery in Korea, the proliferation of cyber space restrictively correlates with the concentration of physical space.

• 한국정보처리학회논문지
• /
• 제7권11호
• /
• pp.3592-3602
• /
• 2000

영상 처리는 크게 영상에 내재된 특성값을 얻어내는 영상분석과, 동일한 성질의 영상을 분류하는 영상분류의 두단계로 이루어진다. 본 논문에서는 텍스쳐에 내재된 일반적인 속성인 거침과 부드러움의 특성 추출을 통해서 영상에 포함된 다양한 텍스쳐를 자동적으로 인식하고 분류하는 방법을 제안한다. 특성추출은 텍스쳐 영상이 지닌 그레이 레벨의 공간적인 의존성을 이용한 통계적 분석에 기반한 것으로 모멘트와 동차성의 조합을 통해서 일반적인 텍스쳐의 속성을 검출하기 때문에 텍스쳐의 구조형태에 크게 영향을 받지 않는 이점을 가지고 있다. 거친 텍스쳐일수록 강하게 반응하는 모멘트와 부드러운 텍스쳐일수록 강하게 반응하는 동차성의 차를 이용하기 때문에 보다 뚜렷한 텍스쳐 분할이 가능하다. 제안한 시스템의 성능 평가를 위해서 다양한 텍스쳐 영상에 제안한 방법을 적용하고, 성공적인 결과를 보인다.