• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.228-238
• /
• 2003

We believe that existing wire solutions such as HomePNA2.0 using phone lines and HomePlug using power line and wireless solution such as HomeRF are the most promising solutions, because of its cost-effectiveness. However, MAC protocols of these solutions provide only Class of Service(CoS) using priority mechanism like HomePNA and HomePlug or consider only voice among real-time traffics like HomeRF. For these reasons, we perceive the needs of the new MAC protocol which is no new wire solution and provides guaranteed Quality of Service (QoS) for not only voice but also video and audio. In light of this, we present the design and software implementation of a new MAC protocol for Home Networks. Our evaluation results of software implementation verify that proposed MAC protocol can provide low delay, low loss, and low jitter to real-time traffic by reserving bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.318-325
• /
• 2008

HomePlug AV(HPAV) is the standard for distribution of Audio/video content as well as data within the home by using the power line. It uses a hybrid access mechanism that combines TDMA with CSMA/CA for MAC technology. The CSMA/CA protocol in HPAV has two main control blobs that can be used for access control: contention window(CW) size and deferral counter(DC). In this paper, we extensively investigate the impacts of CW and DC on performance through simulations, and propose an adaptive mechanism that adjusts the CW size to enhance the throughput in HPAV MAC. We find that the CW size is more influential on performance than the DC. Therefore, to make controlling the network easier, our proposal uses a default value of DC and adjusts the CW size. Our scheme simply increases or decreases the CW size if the network is too busy or too idle, respectively, We compare the performance of our proposal with those of the standard and other competitive schemes in terms of throughput and fairness. Our simulation and analysis results show that our adaptive CW mechanism performs very well under various scenarios.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.133-133
• /
• 2004

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.4
• /
• pp.405-410
• /
• 2006

This paper presents the design of a USB home controller and a home control system that specially is focused on controlling home appliances as a part of home network systems, the implementation of the USB device access class in an OSGi service platform and a home security system as an application. Designed USB home controllers are able to control various home appliances. They can be used not only to control big home appliances like a boiler but also to control small home appliances like a toaster because they are low-cost solutions. The USB home controller supports real time control using the interrupt transfer of the USB specification. And It is easy to use by homemakers who have no technical knowledge of the system because they just plug and unplug it in a home server then it automatically joins and leaves a home control system. This technique is based on hot-plug and the USB Device Access class in an OSGi Service Platform. The USB Device Access class supports the coordination of automatic detection and attachment of the USB home controller on an OSGi Service Platform, and it downloads and installs device drivers on demand. For an application, we implemented and tested a home security system using two USB home controllers and a CDMA module.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.47-54
• /
• 2015

With the spread of smart technology, in the personal and office equipment, many of the products are equipped with smart features. These changes have opened the era that can enforce the user's operation from a remote location. In this study, we design and implement a smart multi-plug system to make a multi-plug installed in the home can be operated anytime and anywhere via wireless network technologies add smart feature to a multi-plug that can be seen easily around us, it is intended to complement the limitations of traditional multi-plugs. The smart multi-plug proposed in this paper, by operating the plug remotely from smart devices at anytime and from anywhere, is possible to provide services required for the weak users such as elderly and children, it is expected that the proposed system are widely used in the various areas requiring remote control of the power supply including u-Farming, terrarium, and smart home, and so on.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.638-643
• /
• 2004

Middleware enables different networking devices and protocols to inter-operate in ubiquitous home network environments. The UPnP(Universal Plug and Play) middleware, which runs on a PC and is based on the IPv4 protocol, has attracted much interest in the field of home network research since it has versatility The UPnP, however, cannot be easily accessed via the public Internet since the UPnP devices that provide services and the Control Points that control the devices are configured with non-routable local private or Auto IP networks. The critical question is how to access UPnP network via the public Internet. The purpose of this paper is to deal with the non-routability problem in local private and Auto IP networks by improving the conventional Control Point used in UPnP middleware-based home networks. For this purpose, this paper proposes an improved Control Point for accessing and controlling the home network from remote sites via the public Internet, by adding a web server to the conventional Control Point. The improved Control Point is implemented in an embedded GNU/Linux system running on an ARM9 platform. Also this paper implements the security of the home network system based on the UPnP (Universal Plug and Play), adding VPN (Virtual Private Network) router that uses the IPsec to the home network system which is consisted of the ARM9 and the Embedded Linux.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.5
• /
• pp.287-298
• /
• 2016

This paper proposes an effective smart plug system capable of monitoring power, cutting off standby power and overload current. The key design concept is focused on measurement accuracy, self power consumption and controlling via smart phone application. The system is composed of several plugs and a hub, and adopts a star-topology-styled TDMA wireless protocol for communication between plug and hub. The test result shows that the implemented smart plug system meets K10026 regulation and is worth in electrical safety, energy saving, easy living.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.257-263
• /
• 2006

With the ever increasing demand for data communication methods, powerline communication has become in interesting alternative method for data communication in home networking. For the purpose of home safety, several sensors will be installed at door, windows, gas alarm, etc. When considering home networking, the sensor data as well as other types of data should be supported in powerline communication. Usually the sensor data do not have priority over isochronous traffics (voice, video traffic), but in the case of urgent situation at home, the data of sensor being aware of the situation should be transmitted earlier than others. The objective in this paper is to develop a method for supporting an urgent data in home networking using powerline communication. We propose a modified algorithm of HomePlug 1.0 and show the results of computer simulation.

• Journal of Korea Multimedia Society
• /
• v.17 no.7
• /
• pp.879-885
• /
• 2014

This paper designs and implements the 2 plug type standby power control outlet based on IEEE 802.15.4 using Zigbee and IPv6 network in order to reduce the standby power to the user. The standby power control system is consisted of direct power and standby power plug. Also this system can communicate bidirectionally in wireless because built-in wireless communication modules. One gateway is linked with many standby power control outlet in wireless. Each standby power control outlet executes the operation needed in power control independently. Also each standby power control outlet has its own power can be detected in real time independently of the power can be controlled.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.701-704
• /
• 2003

The home network system of ubiquitous computing concept is changing present our home life as more comfortable and safe. Also, it permits that we can connect the home network system and control the appliance which is linked to the home network system without limitation in time and place. But, as other systems that use the public network like the Internet, remote control/monitoring of the home network system that use the Internet includes problems such as user's access which is not admitted and information changing. This paper presents the efficient solution about the security problem that is recognized to important problem of the home network system. Also this paper implements the security of the home network system based on the UPnP (Universal Plug and Play), adding VPN (Virtual Private Network) router that uses the IPsec to the home network system which is consisted of the ARM9 and the Embedded Linux.