• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.147-151
• /
• 2004

QoS is a subject of high interest for successful deployment of various services in a home gateway and the gateway is possible to support QoS by installing existing queuing disciplines, which control the outgoing traffic to guarantee only QoS of the traffic. But m the home gateway it is also important to guarantee QoS of the incoming traffic. This paper proposes an adaptive control of the traffic to guarantee QoS of incoming traffic into the home gateway. In the proposed method, the upper limit of the available bandwidth of sending rate varies with receiving rate. And the proposed method makes the gap between the allocated rate and the actual service rate of the traffic narrow. Some experiments on a test bed show that the proposed method is valid.

• 한국IT서비스학회:학술대회논문집
• /
• 2010.05a
• /
• pp.151-154
• /
• 2010

In this paper, we propose an energy monitoring and management service based on wireless sensors and a home gateway for homes and buildings. Homes and buildings have a significant energy saving potential compared with other sectors. Sensing, monitoring, and managing of the information on the energy consumption are required for an efficient energy saving service. The proposed system is composed of two main components, wireless sensor and an intelligent home gateway. Wireless sensors have the ZigBee communication interface for communication, and the intelligent home gateway is an energy portal. We expect that energy saving could be achieved with this system. As a further work, we will analyze the practical impact of the proposed service.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2281-2285
• /
• 2009

Powerline communication is the data signal which is modulated by carrier frequency through the installed powerline at in-home or office is transmitted and received signals are separated into data signal with using band-pass filter which cent-frequency is carrier frequency. The home gateway, an equipment which works as an gateway for ubiquitous home network, relays all functions of a home network. The home gateway must always be connected in order to provide seamless services. However it gives unfavorable power consumption. Therefore the needs for working in maximum power saving mode while there is no data traffic and for invoking to the normal function when it is necessary. So, in this paper we survey the development of low power PLC modem monitoring of power consumption and breaking abnormal power in the home Network.

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.9-17
• /
• 2022

In this paper, we propose a secure smart home network model and a novel cryptographic protocol called the Smart Home Security Protocol (SHSP). Authentication, key distribution, and encryption functions are properly supported in order to make a smart home secure, and a residential gateway (RG) plays a central role in performing these functions. According to the characteristics of networks and attached devices, we classify smart homes into three different types of sub-networks and these networks are interconnected with one another by the RG. Depending on a sub-network, we use different types of secure schemes to reduce the burden of the process and the delay in devices while it provides proper security functions. The proposed secure smart home model is implemented and verified by using a variety of embedded system environments.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.509-512
• /
• 2003

On-going convergence between broadcasting and communication is currently bringing in lots of drastic changes to multimedia services to the home. The FTTH-based home networks will be the interface among the digital home appliances for broadcast digital contents as weil as for broadband data connection. In this paper, we discuss several design issues for home gateway architecture that effectively distributes realtime broadcasting contents (from either the headend in the access network or the satellite/terrestrial broadcasts) to heterogeneous devices in the home network.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.589-596
• /
• 2005

The objective of this paper lies in the design and implementation of a home gateway supporting live video streaming which flows from the Non-SIP video camera in home to the mobile SIP device outside. We developed the home gateway on the OSGi framework and employed the RTC technology which embeds an SIP stack so that the multimedia session can be established from the home device to the mobile user outside. And also we developed an RTC bundle to manage the session and a virtual capture device driver to read the video stream from the Non-SIP video camera in the home network, and installed them on the home gateway. Finally, we constructed the experimental environment that has the windows messenger as the SIP mobile device and an AXIS 2100 UPnP video camera as a video source, and then tested if the session establishment to the mobile user from the camera and live video streaming work well between them.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.720-729
• /
• 2011

The demand for wireless technology in home automation systems has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension, aesthetic benefits, and mobile device connectivity. Among the many wireless technologies, ZigBee is one of the most useful for home automation; a wireless home networking system can be configured using ZigBee alone. Compatibility with conventional home networking systems that are based on wired media, however, is not supported. KNX is a mature protocol for wired media that is recognized as an international standard. This paper proposes a KNX-ZigBee gateway to interface between KNX and ZigBee systems and thereby enable integration of wired and wireless home automation systems.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.225-228
• /
• 2005

In this paper, we put a focus with a node cognition section of home gateway for information equipments to operate in a home network environment organically individually. We used an IPv6 protocols on a home network node connection on IP base. A node used a certificate published in a registered process by a home gateway for security. We designed secure node cognition structure to have had strong identification.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.23-27
• /
• 2007

Fruition for a diverse uIT(Ubiquitous Information Technology) service is currently required through the convergence of what is known as ubiquitous computing technology. In recent years, with the rapid growth of the need for information services, heavier demands have been made upon the supply of high-quality multimedia services that require a high bandwidth. Today, various home network solutions have been proposed to manage these service smoothly and a system able to deal with various types of network traffic without delays. In addition, in established home network environments that mix wired and wireless networks, along with the steady evolution of wireless network technology and the earnest development of ubiquitous computing technology, sensor-based wireless networks have emerged as a core solution for home networks. In this paper, a sensor network-based home control system supporting the next generation home gateway system for ubiquitous home environments is designed and implemented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.442-448
• /
• 2006

This paper considers a home gateway(HG) that processes VOD services and controls home appliances. This paper proposes a PID algorithm-based adaptive bandwidth control method used in the HG, which guarantees QoS of incoming traffic such as VOD and real-time control data via control of outgoing traffic and have little effects on the CPU computation time. The proposed method is validated via implementation of real test environment.