• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.56-62
• /
• 2004

Recently, necessity and usage of the teleoperation have been increased in various fields from industrial automation to home application. Also, the internet is considered as a strong candidate far the transmission media of signals. However, it has an irregular transmission time delay and causes critical problems such as instability and poor performance. This paper presents a practical internet teleoperation system with a streaming buffer system which makes a variable time delay fixed. Validity of the proposed system is demonstrated by implementing the embedded system on a HILS(hardware in the loop system) which models a two-wheel mobile robot.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.309-312
• /
• 2016

Green Internet of Things (IoT) is the study and practice of eco-friendly sustainable computing. The basic goal of green computing is to reduce the use of materials and maximize energy efficiency with reliable and secure communications. The paper presents various technologies and issues regarding green IoT. It also studies the green Information and Communication Technology (ICT) such as green M2M, green Cloud Computing (CC), and green Data Center (DC). In addition, this paper mentions about the reliability in IoT Communication and and issues to achieve green IoT communication by applying efficient activity scheduling technique for energy saving. Finally, we propose the green IoT-Home Service (GIHS) model which provides efficient energy management in home automation system.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.957-966
• /
• 2014

Some of DC actuators used in home automation, office automation, medical equipment and automotive systems require a position sensor. In low power applications, the introduction of such a transducer remarkably increases the whole system cost, which justifies the development of sensorless position estimation techniques. The well-known AC motor drive sensorless techniques exploiting the fundamental component of the back electromotive force cannot be used on DC motor drives. In addition, the sophisticated approaches based on current or voltage signal injection cannot be used. Therefore, an effective and inexpensive sensorless position estimation technique suitable for DC motors is presented in this paper. This technique exploits the periodic pulses of the armature current caused by commutation. It is based on a simple pulse counting algorithm, suitable for coping with the rather large variability of the pulse frequency and it leads to the realization of a sensorless position control system for low cost, medium performance systems, like those in the field of automotive applications.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.787-795
• /
• 2001

An experimentation on the on-line fault detection and diagnosis(FDD) system has been performed with HVAC system in he experimental building constructed inside the large scale environmental chamber. Personal computer with a home-made FDD program by pattern recognition method utilizing artificial neural network was connected on-line via Ether-net TCP/IP to the supervisory control server for HVAC system. The FDD program monitored the HVAC system by 1 minuted interval. The results showed that he FDD program detected the sudden or abrupt faults such s those in fans, sensors and heater, etc.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.471-474
• /
• 2001

In this paper, a communication system that is not using the communication line but power line is presented. It will be very useful for an information-oriented society with tole-metering and home automation. Conventional system has a difficulty in transmitting information due to decreasing communication voltage. Proposed idea is a special type switching amplifier system which has a low inner resistance and using high efficient ferrite core in a coupling circuit. This new system is proposed to overcome the loss of conductor load and coupling circuit in a PLC system.

• 디지털콘텐츠학회 논문지
• /
• 제7권2호
• /
• pp.103-108
• /
• 2006

모바일 응용을 실현하는데 있어서 근거리 무선 통신과 네트워킹 기술의 중요성은 증가하고 있다. 예를 들어 지그비 기술은 베터리의 수명이 수개월에서 수년에 이르는 기기 사이의 저 가격과 저 전력 연결을 제공한다. 또한, 지그비는 블루투스에서 제공하는 네트워크 구성보다 큰 메쉬 네트워크를 구축할 수 있다. 지그비 규격의 주된 특징은 네트워크의 유연성, 저가격, 저전력 소모이며 고정, 휴대 및 모바일 기기사이의 Ad-hoc 네트워크에서 저속 데이터 전송이다. 홈 네트워크와 홈 자동화 분야는 간단한 네트워크의 예로써 지그비의 큰 시장중의 하나이다. 본 논문은 잡음과 간섭 그리고 라이시안 페이딩 환경에서 지그비 시스템과 DSSS-BPSK 신호의 성능을 분석하였고 근거리 무선 채널에서 간섭과 페이딩의 영향에 따른 성능 감쇠에 대하여 연구하였다. 특히, 라이시안 페이딩과 간섭 레벨에 따른 오율 특성을 BER 성능 그림을 통하여 나타내었다.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2011

This paper describes the high speed PLC-based remote control system that can monitor and control textile machineries bi-directionally through Internet. There are many textile machineries without network functions in the factory. We apply the PLC technology in order to give a network function to them in which the existing electric power line is used with network communication lines without separate wiring constructions. In order to realize this system, we have implemented a protocol for network communication of system, high-speed PLC modules, and Ethernet-to-UART modules. Finally we confirmed the effectiveness of system by applying actual test environments.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.497-502
• /
• 2005

Needs of automation and computerization in the construction industry has been recognized but the implementation of e-business solutions with project management systems has not been fully explored. In order to cope with different management practices in home office and project sites, integration of two popular systems, Enterprise Resource Planning (ERP) and Project Management System (PMS) is essential. The objective of this study is to find ways to functionally and systematically integrate ERP and PMS. With the integration of ERP and PMS, a project will be managed much more efficiently and effectively. It is expected that this study will benefit system integrators and help them to understand construction management processes and integrate the solutions with minimized programming work.

• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.287-298
• /
• 2016

This paper proposes an effective smart plug system capable of monitoring power, cutting off standby power and overload current. The key design concept is focused on measurement accuracy, self power consumption and controlling via smart phone application. The system is composed of several plugs and a hub, and adopts a star-topology-styled TDMA wireless protocol for communication between plug and hub. The test result shows that the implemented smart plug system meets K10026 regulation and is worth in electrical safety, energy saving, easy living.