• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.10-15
• /
• 2023

The carbonaceous materials have attracted much attention for utilization of anode materials for lithium-ion batteries. Among them, hollow carbon spheres have great advantages (high specific capacity and good rate capability) to replace currently used graphite anode materials, due to their unique features such as high surface areas, high electrical conductivities, and outstanding chemical and thermal stability. Herein, we have synthesized various sizes of hollow carbon spheres by a facile hardtemplate method and investigated the anode properties for lithium-ion batteries. The obtained hollow carbon spheres have uniform diameters of 350 ~ 600 nm by varying the template condition, and they do not have any cracks after the optimization of the process. Increasing the diameter of hollow carbon spheres decreases their specific capacities, since the larger hollow carbon spheres have more useless spaces inside that could have a disadvantage for lithium storage. The hollow carbon spheres have outstanding rate and cyclic performance, which is originated from the high surface area and high electrical properties of the hollow carbon spheres. Therefore, hollow carbon spheres with smaller diameters are expected to have higher specific capacities, and the noble channel structures through various doping approaches can give the great possibility of high lithium storage properties.

• 접착 및 계면
• /
• 제15권2호
• /
• pp.63-68
• /
• 2014

주형으로 구형의 폴리스티렌을 사용하고 질소와 탄소원으로 시안아미드를 사용하여 열처리 과정을 거친 후 구형의 할로우 메조포러스 질화탄소 물질을 합성하였다. 이때 할로우 메조포러스 질화탄소 물질을 합성하는 과정에서 실리카와 같은 무기물 주형을 사용하지 않기 때문에 이차적인 실리카 제거 공정이 필요 없고 용매를 전혀 사용하지 않는다. 구형의 폴리스티렌 입자는 약 170 nm 크기였고 그리고 할로우 메조포러스 질화탄소 구형입자의 할로우 직경은 약 82 nm, 벽 두께는 약 13 nm이었다. 또한 할로우 메조포러스 질화탄소 물질의 표면적, 나노세공 크기, 세공부피는 각각 $188m^2g^{-1}$, 3.8 nm, $0.35cm^3g^{-1}$이었다. 한편, 할로우 벽은 흑연구조와 유사한 박막층의 쌓임 구조를 가졌으며 이러한 할로우 메조포러스 질화탄소 물질은 연료전지, 촉매, 광촉매, 전자방출 소자 등과 같은 분야에 매우 높은 응용 가능성을 가질 것으로 기대된다.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.91-95
• /
• 2005

Carbon composites were prepared with pitch-based round, C, hollow-type carbon fibers and pitch matrix. The thermal conductivities parallel and perpendicular to the fiber axis were measured by steady-state method. It was found that the thermal conductivities depended on the cross-sectional forms of the reinforcing fibers as well as the reinforcing orientation and carbon fiber precusors. Especially, mesophase pitch-based hollow carbon fiber-carbon composites had the most excellent thermal anisotropy, which was above 100.

• Carbon letters
• /
• 제14권1호
• /
• pp.55-57
• /
• 2013

The development of hollow carbon balls by $CO_2$ oxidation of two types of carbon blacks was studied. Super P (SP) and Denka Black (DB) were used for this study. Specific surface area (SSA), structural parameters, and microstructures were examined using Brunauer, Emmett and Teller apparatus, X-ray diffraction spectroscopy, and transmission electron microscope (TEM), respectively. The SSAs of both oxidized carbon blacks increased after oxidation. The SSAs of raw DB and SP were 73 $m^2/g$ and 60 $m^2/g$, respectively. Maximum SSAs of oxidized DB and SP were 152 $m^2/g$ and 253 $m^2/g$, respectively. The $d_{002}$ of DB and SP showed almost no change after oxidation. The Lc of raw DB ($38{\AA}$) and SP ($19{\AA}$) increased with increasing weight loss. The $L_c$ of SP increased up to $254{\AA}$ at 96% weight loss. The SSA increased about twice in DB (148 $m^2/g$) and about four times in SP (254 $m^2/g$) after 3 h oxidation compared with the original carbon blacks. Through TEM observation the outer parts of the oxidized carbon blacks showed a rigid shell structure and the inner parts looked empty. Generally it looked like an angular soccer ball, so we named it 'hollow carbon ball'. It is expected that the hollow carbon ball can be used as catalyst supports.

• 공업화학
• /
• 제27권4호
• /
• pp.449-454
• /
• 2016

본 연구에서는 구형의 폴리스티렌 구슬을 틀로 사용하여, 크기분포가 좁으면서 속은 비어있고 벽이 다공성인 구조의 탄소 마이크로 캡슐을 합성하였다. 폴리스티렌의 표면은 무기물인 실리카졸이 쉽게 입혀질 수 있도록 폴리비닐피롤리돈(PVP)을 코팅하여 변조하였다. PVP가 코팅된 PS 마이크로 입자표면에 SBA-16 졸을 부착시킨 다음, 실리카층에 존재하는 중간 크기의 세공 내에 탄소원을 채워 넣는 음각식 형뜨기법을 적용함으로써 속이 빈 구조의 탄소 마이크로캡슐을 제조하였다. 탄화과정을 거치고 틀로 사용한 다공성 실리카입자를 HF로 용해하면, 좁은 입자크기분포를 갖는 중간세공이 함유된 계란껍질형의 탄소입자를 얻을 수 있었다. 계란껍질형 탄소 마이크로캡슐 입자의 다공성과 전기화학적 특성은 XRD, SEM, TEM, 질소분자 흡/탈착분석법 및 cyclic voltammetry법으로 평가하였다. 이들 탄소입자는 슈퍼캐패시터와 같은 전자재료로서 유효하게 사용될 만한 높은 전기전도도와 용량을 나타내었다.

• Steel and Composite Structures
• /
• 제10권6호
• /
• pp.517-539
• /
• 2010

This paper presents the axial compressive behaviour of stub concrete-filled columns with elliptical stainless steel and carbon steel hollow sections. The finite element method developed via ABAQUS/Standard solver was used to carry out the simulations. The accuracy of the FE modelling and the proposed confined concrete stress-strain model were verified against experimental results. A parametric study on stub concrete-filled columns with various elliptical hollow sections made with stainless steel and carbon steel was conducted. The comparisons and analyses presented in this paper outline the effect of hollow sectional configurations to the axial compressive behaviour of elliptical concrete-filled steel tubular columns, especially the merits of using stainless steel hollow sections is highlighted.

• Composites Research
• /
• 제12권2호
• /
• pp.36-45
• /
• 1999

Since carbon fiber epoxy composite materials have excellent properties for structures due to their high specific strength, high modulus, high damping and low thermal expansion, the hollow shafts made of carbon fiber epoxy composites have been widely used for power transmission shafts for motor vehicles, spindles of machine tools and rollers for film manufacturing. However, the molded composite shafts are not usually accurate enough for mechanical machine elements, which require turning or grinding of composite hollow shafts. In this paper, the grinding characteristics of composite hollow shafts, which are flexible in the radial and circumferential directions, were investiaged experimentally and analytically with respect to the stacking angle, thickness and outer diameter.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.207-208
• /
• 2023

Concrete bricks and hollow concrete block products manufactured using ordinary portland cement react with salt and carbon dioxide absorbed from the soil and atmosphere in the use environment, causing contamination such as efflorescence. This is due to the reaction between calcium hydroxide, a cement hydration product, and carbon dioxide, producing and eluting calcium carbonate. This study was a preliminary study to compare and evaluate the reduction of efflorescence in concrete bricks and hollow concrete block products manufactured using carbon dioxide reaction hardening cement. The purpose was to evaluate the efflorescence occurrence in products using ordinary Portland cement.

• 멤브레인
• /
• 제20권4호
• /
• pp.312-319
• /
• 2010

탄소막은 고분자막에 비해 높은 선택성과 투과성, 열적, 화학적 안정성을 가지고 있어 기체 분리, 특히 휘발성 유기화합물(VOCs) 분리막으로 많은 관심을 받고 있다. 활성탄소중공사막은 기공 표면(pore wall)에 형성된 흡착성 미세기공에 의해 선택적으로 응축성 성분이 흡착, 확산되는 흡착-확산 기구에 의해 흡착성-비흡착성 물질이 분리된다. 본 연구에서는 다공성 알루미나 중공사막 지지체에 phenolic resin (novolac type)을 코팅한 후 산화, 탄화 및 활성화 등의 열분해 과정을 통해 막 표면과 기공 표변에 흡착성 미세기공이 형성된 활성탄소중공사막을 제조하였다. 또한 열분해 조건에 따른 phenol/alumina 복합 활성탄소중공사막의 물리적 특성과 기체 투과특성에 대해 살펴보았다. 그 결과, 제조된 phenol/alumina 복합 활성탄소중공사막이 휘발성 유기물질의 대부분을 차지하고 있는 탄화수소를 선택적으로 분리 회수하는데 매우 효과적인 특성을 갖고 있음을 확인할 수 있었다. 따라서 본 연구에서 개발된 phenol/alumina 복합 활성탄소중공 사막은 VOCs의 분리, 농축에 매우 효과적으로 활용 가능할 것으로 기대된다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제10회 하계 Workshop
• /
• pp.59-101
• /
• 2002

PVDF is good material for a hollow fiber membrane with high porosity and excellent hydrophobicity. Asymmetric PVDF hollow fiber membranes were prepared by the Loeb-Sourirajan phase inversion method. Asymmetric PVDF hollow fiber membranes could be controlled in pore size and porosity using various additives(LiCl, ZnCl$_2$) and internal coagulants (water, EtOH/water, and DMAc/water mixture). $CO_2$removal efficiency of asymmetric PVDF hollow fiber membranes was 1.2 times high than that of commercialized PP hollow fiber membranes at MEA 5wt% solution. $CO_2$flux of asymmetric PVDF hollow fiber membranes was 2.5 times higher than that of commercialized PP hollow fiber membranes. $CO_2$removal efficiency and absorption rate of asymmetric PVDF hollow fiber membranes were 30 times higher than those of packed column at absorbent $H_2O$. $CO_2$flux of asymmetric PVDF hollow fiber membranes at MEA 5wt% solution was 48 times higher than that of pure water. In the case of MEA 5wt% solution used as an absorbent, the $CO_2$absorption rate and removal efficiency of PVDF hollow fiber membrane were 2.3 times higher than that of a packed column.