• 한국조경학회지
• /
• 제21권1호
• /
• pp.13-30
• /
• 1993

The purpose of this study was to present data to the landscape planning and design through analyzing correlation between visual preference of users and nonusers and the landscape of hole in golf couses. Stimulus objects were selected from the 18 holes in Tae-gu Country Club. Preference value was judged through photo simulation by 35 subjects photographed at Tee and Interpoint (IPI, IP2), and classified into three landscape types and nine landscape components from photo analysis by researcher. For test of difference between groups toward each stimulus, t-test was used, and Duncantest, Correlation analysis for finding out correlation between preference degree and the landscape of each hole. The results of this study were as follows: As a result of analysis of preference value between groups for each hole, it has been shown that there was scarcely difference with each other. Form the relation between preference degree and spacial structure of hole, the holes making up a superior preference group have been shown that the greater part of the holes had a downward slope or a gentle slope mostly and then a visible ratio of fairway was high, and had diversified scenery by a lotus pond, a solitary planting tree, the roll of a fairway, facilities for convenience, etc. The holes making up a low-ranking preference group have been shown that the greater part of the holes had upward slope or a similar slope to it and had characteries of the bad condition of lawn, the nearby factories and odors, the monotonous scenery of a fairway, an unreasonable mixing of holes, etc. From the relation between preference degree and landscape components forming hole, it has been shown that the preference degree between users and nonusers had positive correlation to the occupied ratio of space of landscape components at Tee and Approach. At Tee, it has been shown that the preference degree of two groups were related with a lawn surface of fairway negatively, a lotus pond, a sky positively, and the preference degree of nonusers was related with iron-top for electric transmission positively. At Approach, it has been shown that the preference degree of two groups were related with iron-top for electric transmission negatively, and the preference degree of nonusers was related with a building positively. From the relation between preference degree group to each hole and the occupied ratio of space of landscape types, it has been shown that the constituent ratio of a high-ranking group was 1:2.4:2.2 and a low-ranking group was 1:4.1:5.1 among vertical type, horizontal type and background at Tee, but the constituent ratio of space of a high-ranking group was similar to a low-ranking group at Approach.

• 한국의류학회지
• /
• 제9권1호
• /
• pp.37-46
• /
• 1985

The study is undertaken to utilize the computer in pattern making for women. The automation by the use of computer provides the higher accuracy and efficiency in pattern making. GIGI Graphic Terminal is used for pattern making. The results are as follows: 1. Basic points which can be connected to depict basic pattern are represented on the X-Y co-ordinates. 2. Body measurements for bodice and sleeve pattern are as follows: For bodice pattern: center back waist length, bust girth, and shoulder width. For sleeve pattern: arm hole length, wrist girth, and sleeve length. 3. Grading of standard size was accomplished by using same method.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.87-94
• /
• 2009

There are several types of compressors which are appropriate for hydrogen gas station. Diaphragm type of compressor is the one of them and it satisfies the requirements for that purpose in terms of maintaining gas purity and making high pressure over 700 bar. The objective of this study is to find an optimal design of oil distribution hole configuration. The number of holes is changed maintaining total cross-sectional area of holes. Five cases(1 hole, 4, 8,16 and 24 holes) were studied through Fluid Structure Interaction(FSI) analysis method. Gas and oil pressure, the deflection and stress of the diaphragm were analysed during compression and suction process respectively. There is no specific difference among the cases during compression. An additional deflection due to the existence of hole was found during suction for all case. But the highest deflection and stress were found in the 1 hole case. It was seen that 60% decrease of stress in magnitude in 24 hole case compare to the 1 hole case.

• 복식
• /
• 제54권7호
• /
• pp.27-40
• /
• 2004

The purpose of this paper is to make it easy to reproduce the Pattern and sewing technique of men's coat in 18th century. which are modified in order to be made readily available in Korean theatre costume. The investigation was performed in three steps. 1st, The papers and records about development and change of men's coats were reviewed. End; The whole process of the way how to make a typical 18th century men's coats were sewn. 3rd ; The modification or revision into the more simplified pattern using by CAD system and sewing technique were suggested in detail. The size of the pattern in the original one, which we chose for this research, was generally small. with the side line being moved back a little. Moreover, arm movements were severely restricted because of the small arm-hole. The problems of original pattern were corrected by making both front and back pattern snug and side line being moved to the front, and making arm-hole wider. In the sewing technique, the simple way how to use of Padding, inter-linings and linings and to create the most noticeable figure of 18th century men's coat. This article may help theatre costume production in Korean performing art.

• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.131-140
• /
• 2013

여성복에 있어서 09/10년 시즌에 가장 주목할 만한 특징은 파워 숄더 룩이다. 파워 숄더 룩은 단순히 패션니스타들에서만이 아니라 당당히 스트리트 패션의 하나로 자리 잡았으며 파워 숄더 룩의 50%이상을 차지하는 재킷이 여성복의 핵심 아이템의 하나로 부활하면서 재킷의 어깨 각도는 0도에서 30도 이상까지 다양하게 나타난다. 다양한 어깨 각도 중 10도, 15도, 20도의 형태가 70%이상을 차지하고 있으며 패턴의 형태는 몸판의 어깨선을 자연스럽게 올리고 확장한 어깨변형 패턴, 어깨선과 함께 소매산 부분을 절개한 소매산 변형 패턴, 몸판과 소매가 연결된 패턴이 주를 이루고 있다. 파워 숄더 패턴 전개는 어깨 각도가 높아질수록 각이 시작되는 점이 목옆점에 가깝게 하고 어깨끝점이 확장되어야 소매의 외관형태가 편안하고 피트성이 좋아진다. 어깨 변형의 경우 앞뒤 진동선의 시작점인 어깨점과 소매산의 정점 부분의 선이 완만하게 이어지도록 S라인형태를 유지하는 것이 가장 중요하며 소매산의 ease분량이 일반 재킷 소매보다 많아야 파워 숄더 실루엣이 자연스럽게 연출된다. 소매변형 패턴은 중심쪽 소매의 소매산 높이는 기본소매 소매산높이의 1.5cm를 외곽 소매분량으로 처리한 것을 고려하여 소매산 높이를 설정하고 어깨 각이 커질수록 외곽소매의 소매산 폭을 크게 함으로서 소매의 어깨점이 목옆점 방향으로 휘지 않고 각이 선 파워 숄더가 완성된다. 소매변형과 소매와 몸판연결 패턴의 경우 어깨점과 상완이 연결되는 부분에 충분한 여유가 필요하며 어깨각도도 다른 형태에 비해 상대적으로 낮아 보인다. 이와 같이 파워 숄더 재킷 패턴은 패턴 제작시 디자인적인 요소를 충분히 감안한 패턴 설계와 함께 소매의 달림선 위치, 어깨너비, 어개 높이 확장량, 소매통의 여유량 등을 고려하여 제작하는 것이 바람직하다.

• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.28-36
• /
• 2010

발파작업에서 폭약을 절감하고, 파쇄도를 향상시키는 경제적인 발파방법에 대한연구가 진행되고 있다. 그 중 하나가 발파공 내에 기층(air deck)을 형성시키는 에어데킹(air decking) 공법이다. 그러나 지금까지 이 공법은 물이 고여 있는 발파공에서는 적용이 어려웠다. 본 연구에서는 물이 고여 있는 발파공 내에 침전할 수 있는 수중용의 에어튜브(Air Tube)를 제작하여 이 수중용 에어튜브가 발파공 내의 일정 위치, 즉 폭약 속이나 폭약과 전색 사이에 존치할 수 있도록 하였다. 이것을 실제 물이 고여 있는 발파공에 적용 실험을 한 결과 폭약량은 10~15% 감소하면서도 파쇄도는 향상되었다.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.40-44
• /
• 2010

opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel information and selecting appropriate idle channel for transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access. Idle channel availability, spectrum hole sufficiency and available channel condition will be included in algorithm statistical information. The model include the control channel and data channel, the transmitter negotiates with receiver on transmission parameters through control channel, statistical decision results (successful rate of transmission) from exchanged transmission parameters of control channel should pass the threshold and decide the data transmission with spectrum hole on data channel. A dynamical sensing range as a important parameter introduced to maintain the our protocol performance. The proposed protocol's simulation will show that proposed protocol does improve the throughput performance via traditional opportunistic spectrum access MAC protocol.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.273-276
• /
• 2010

Opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel information and selecting appropriate idle channel for transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access. Idle channel availability, spectrum hole sufficiency and available channel condition will be included in algorithm statistical information. The model include the control channel and data channel, the transmitter negotiates with receiver on transmission parameters through control channel, statistical decision results (successful rate of transmission) from exchanged transmission parameters of control channel should pass the threshold and decide the data transmission with spectrum hole on data channel. The proposed protocol's simulation will show that proposed protocol does improve the throughput performance via traditional opportunistic spectrum access MAC protocol.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• 터널과지하공간
• /
• 제17권3호
• /
• pp.216-224
• /
• 2007

화약의 동적 충격에너지를 이용하는 발파굴착은 매우 효율적인 터널굴착방법이다. 그러나 진동과 암소음 등의 발파공해가 발생하는 문제점이 있다. 최근 연구를 통해 노치공을 이용한 선균열 암굴착방법은 발파공해와 터널의 여굴을 상당히 줄일 수 있는 것으로 확인되었고 이에 따라 본 연구에서는 노치발파공의 성형을 위한 노치장비개발에 관한 연구를 수행하였다. 노치공을 효율적으로 성형하기 위해 노치비트의 길이, 높이 등을 다양하게 변화시켜 실험을 수행하여 최적화하였고, 천공속도, 천공정밀도를 높이기 위한 천공비트, 노치비트, 아답타, 노치 가이드로 이루어진 노치비트 시스템을 개발하였다.