• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.53-59
• /
• 2014

고온과 부식 환경에서 사용되는 용강운반용 철강구조물은 내화재에서 발생하는 가스에 의해 구조물 두께의 감소와 가스배출구 주변부의 확장 등이 일어나며, 이로 인해 구조물 전반에 걸쳐 응력이 증가하고 특히 가스배출구 주변에는 상당한 응력집중이 발생한다. 또한 구조물의 고온 환경은 소재의 항복강도나 인장강도와 같은 기계적 물성의 열화를 일으킬 수 있다. 이러한 문제점들은 구조물 안전에 심각한 영향을 미칠 수 있다. 본 연구에서는 10년 정도 사용한 구조물에 대하여 응력해석과 기계적 물성을 측정하여 열화 정도를 평가하였다. 구조물의 기계적 물성은 계장화압입시험법을 이용하여 구조물 표면에서 직접 측정하였다.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.

• 한국항공우주학회지
• /
• 제47권9호
• /
• pp.617-628
• /
• 2019

벤트홀로 연결된 두 개의 가변 체적 챔버를 가지고 있는 파이로테크닉 분리 너트는 복잡한 과정을 통해 분리를 수행하므로 많은 설계 인자를 가지고 있다. 접촉부의 각도, 구성품의 질량, 누름봉 돌출부 안쪽 지름, 환형 챔버의 초기 부피, 확장 챔버의 초기 부피, 화약질량, 벤트홀 지름과 같은 설계 인자들의 변화에 따라 분리 너트의 성능이 어떻게 달라지는지를 파악하면 설계 개선 방향을 결정하는데 도움이 될 수 있다. 이에, 선행 연구를 통해 개발한 파이로테크닉 분리 너트 거동 예측 모델을 이용하여 매개변수 연구를 수행하였다. 다른 설계 인자의 값은 고정한 상태에서 한 설계인자의 값을 독립적으로 변화시키며 분리 시간이 어떻게 달라지는지, 변화의 원인이 무엇인지를 분석하였다.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2466-2473
• /
• 2002

In twin roll strip casting process, the design of casting roll is the most important equipment for producing strip. Analyses of heat transfer and deformation for the casting roll are carried out by using the finite element program, ANSYS. Both the elastic deformation and the elasto-plastic deformation under a thermal load are considered in the analysis. Optimization to minimize the volume of roll is performed under the various thermal loads such as the heat flux and the roll speed. Design variables are defined by diameters and positions of the cooling hole in the roll , Although the thermal load remarkably varies, the design variables and objective function are found to be consistent.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.244-249
• /
• 2000

Thermal gradient chemical vapor infiltration (TG-CVI) process, which is one of the CVI techniques to densify a porous fiber preform, requires for a heater to have uniform surface temperature distribution. Thus, it is essential to design the shape of the heater and to predict the temperature distribution when the heater has a profile which is not a simple cylinder. In this study, an analytical method has been used to design the inner profile of a conical heater showing uniform temperature distribution, if its outer shape is specified. Temperature distribution on the heater surface has been calculated with the finite difference method and compared with the experimental results. When a heater had a combined profile with a large cone and a small cylinder, temperature was higher in the cylindrical part. To reduce the temperature difference between these areas, a hole-machining method has been proposed including other possible ones. A shape design and optimization program has been made to improve the temperature uniformity of the TG-CVI heater better than that designed with the analytical method.

• 한국실내디자인학회논문집
• /
• 제23권3호
• /
• pp.134-143
• /
• 2014

The protection of Design is very important issues in these days. Even though Interior Design is also one of important design sections, it is relatively unprotected by formal intellectual property laws, yet creativity and innovation flourish. The needs for protection of Interior Design have been creased. The aim of this study is to suggest the weakness of the system for protection of Interior Design. The proposed research is comprised of two themes. One is to research Acts related to protection of Interior Design. The second is to study the registered cases under the Design Protection Acts. These two theme is generated by the comparative review between ROK and U.S.A. Through these comparative results, this study propose some considerations for an effective protection for Interior Design. Design need to be registered in the hole image of the space not a partial element. The concept needs to be protected because it is more effective way to respond the copying. Exterior for facade and Interior Design need to be registered in one registration to use the protection system actively.

• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.271-286
• /
• 2020

This study evaluated designs via the consumers' function and design preferences survey for using product design images, virtual avatar wearing images and product explanations that identified consumers' function and design preferences for knee protection pads as well as to develop movement assistive knee pad designs. We developed Design A for men and Design B for women. For Design A, the front of the knee supports muscles and alleviates pain with a hole. Mesh material with good ventilation was applied to enhance wearing comfort. The color was achromatic for a modern style, and the hook fastener and loops enabled easy wear and removal of the pad while controlling size and pressure strength. For Design B, taping details seamlessly support muscles in the knee area with fabrics less than 0.1 cm thick and with long sleeves in the diverse sizes. The design's satisfaction assessment showed that potential consumers were satisfied with Design A and Design B for overall design and functional features. Over 77% wanted to use/wear and purchase designs; in addition, over 78% expected it would help with walking and relieve knee pain. The results can be helpful for designers when deciding designs for manufacturing and commercializing kneepad products.

• 한국소음진동공학회논문집
• /
• 제24권8호
• /
• pp.600-605
• /
• 2014

Two mufflers for a large-size sedan are suggested aiming (1) sporty-sound and (2) quiet-sound as well as both satisfying low back-pressure and low manufacturing cost. Transmission loss prediction considering heat and flow may increase the accuracy and reduce the development cost in muffler design; thus, GT-power prediction considering heat, flow, and acoustics is utilized. By understanding the fundamentals of flow-acoustic theory in small orifice(hole), an effective muffler design concept is proposed. Vehicle tests show the consistence with predictions for sound; also a back-pressure test bench confirms the advantage in pressure drop for both suggested mufflers. Those suggested mufflers also have advantages in manufacturing cost due to simplicity of the design.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.181-191
• /
• 2002

The homogenization method is applied to maximize crash energy absorption for a given volume. Optimization analysis off closed-hat type example problem is conducted with different impact velocities and thicknesses. The results show that the bending-type deformation for the original design is changed to the folding-type deformation for a new design with a hole, which is partly due to the increase of the crash energy absorption for the new design. Dynamic mean crushing loads of the original and new design are compared with those by the theoretical equation by Wierzbicki. It shows that the dynamic mean crushing loads of new designs are very close to those by Wierzbicki's equation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

The design of an occupant protection equipment has been considered as the important process in developing a new car since the crash performance plays an important role on the market. The cost is increased when an unexpected real test is carried out in the proto-design stage. Thus, the exact prediction of a crash performance can reduce the number of full-car test. In this research, the robust design of an airbag system considering the frontal crash is suggested to predict the more reliable responses. On the contrary, most existing researches do not consider the uncertainties. The uncertainties treated in this research are the tolerances of the vent hole, the time to fire and the length of a strap in airbag and the tolerance of the load limiter load in seat belt. The Taguchi method is utilized to determine the robust optimum of each parameter