• 한국정보과학회논문지:데이타베이스
• /
• 제29권3호
• /
• pp.159-167
• /
• 2002

최근 메타데이타의 주요 논쟁점으로 메타데이타의 표준화 문제가 등장하고 있다. 새로운 표준화 방향으로 인한 메타데이타의 확장성은 기존 메타데이타 관리 기법의 변화를 요구하게 되었다. 즉, 동적인 자료의 일관성 있는 저장과 유지방안이 필요하게 되었다. 이에, 본 논문서는 새로운 표준화 형태의 메타데이타 특징들을 정의하고, 이러한 특징들을 만족하는 병행수행 제어 기법인 2 버전 래채 법(Two Version Latch : 2VL)을 제안한다. 2VL은 래치를 사용하여 2 버전을 유지한다. 이러한 기법은 판독과 기록 연산간의 충돌을 최소화하고, 불필요할 로크의 소유를 제거함으로써 리프레쉬 지연을 최소화한다. 따라서, 기존 메타데이타 관리 기법에 비해서 판독 연산에 있어서의 빠른 응답시간과 높은 최근성 반영률을 제공한다. 성능 평가를 통해, 2VL 알고리즘이 메타데이타 관리에 있어서 기존의 알고리즘에 비해 좋은 성능을 가짐을 보인다.

• 한국콘텐츠학회논문지
• /
• 제8권11호
• /
• pp.356-363
• /
• 2008

축제의 양적 팽창에도 불구하고 지역축제에 대한 만족도는 몇몇 축제를 제외하곤 그리 높은 편이 아니다. 이는 지역축제의 본질적 목적에 비해 경제성을 강조한 나머지 지역축제의 개최목적인 지역관광산업의 발전, 지역문화의 보전, 지역주민의 여가기회확대, 지역공동체 의식의 함양, 지역이미지 제고 등을 고려하지 못한 축제들이 우후죽순 생겨나고 지역주민과 관광객의 만족을 높일 수 있는 행사내용과 형식들이 차별화되어 있지 못한 것에 기인한다고 볼 수 있다. 본 연구에서는 이러한 점을 고려하여 문화체육관광부의 축제평가기준을 토대로 제24회 김포문화예술제에 참여한 관광객과 지역주민에 대한 설문조사를 실시하여 지역축제 만족도 결정요인을 규명하고 이를 통해 지역주민과 관광객간의 재방문의도와 추천의도에 미치는 영향을 분석하여 향후 김포문화예술제가 성공적인 지역축제가 될 수 있도록 축제마케팅 전략수립에 유용한 시사점을 제공한다.

• 한국가금학회지
• /
• 제35권2호
• /
• pp.191-196
• /
• 2008

본 연구는 타조 도축 공정의 최적화 및 각 근육별 물리적 특성을 규명하고자 실시되었다. 도체의 pH는 방혈이 종료된 시점부터 급격한 저하를 나타내었고, 따라서 각 공정에 소요되는 시간 단축이 선행되어야 PSE육의 발생을 줄일 수 있을 것으로 판단되었다. 또한, 타조육은 부위에 따라 일부 차이는 있었지만 대체로 높은 pH 범위를 나타내었고, 이에 따라 보수력 또한 높게 나타났으며, 다리 근육에서 다소 높은 전단력을 보였지만, 이는 우육 등 다른 축종에 비해서 대단히 낮은 바, 이들 축종을 대체할 수 있는 우수한 축종으로 판단되며, 타조육에 대한 더 깊이 있는 연구가 요구되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.66-66
• /
• 2009

Various alloy system, such as Cu-Sn-Ti, Cu-Ag-Ti, and Ni-B-Cr-based alloy are used for the brazing of diamond grits. However, the problem of the adhesion strength between the diamond grits and the brazed alloy is presented. The adhesion strength between the diamond grits and the melting filler alloy is predicted by the contact angle, thereby, instead of diamond grit, the study on the wettability between the graphite and the brazing alloy has been indirectly executed. In this study, Cu-13Sn-12Ti filler alloy was manufactured, and the contact angles, the shear strengths and the interfacial area between the graphites(diamond grits) and braze matrix were investigated. The contact angle was decreased on increasing holding time and temperature. The results of shear strength of the graphite joints brazed filler alloys were observed that the joints applied Cu-13Sn-12Ti alloy at brazing temperature 940 $^{\circ}C$ was very sound condition indicating the shear tensile value of 23.8 MPa because of existing the widest carbide(TiC) reaction layers. The micrograph of wettability of the diamond grit brazed filler alloys were observed that the brazement applied Cu-13Sn-12Ti alloy at brazing temperature $990^{\circ}C$ was very sound condition because of existing a few TiC grains in the vicinity of the TiC layers.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.62-68
• /
• 2008

Effects of gravitational orientation on gas tungsten arc welding (GTAW) for 304 stainless steel were studied to determine the critical factors for weld pool formation, such as weld surface deformation and weld pool shape. This study was accomplished through an analytical study of weld pool stability as a function of primary welding parameters (arc current and arc holding time), material properties (surface tension and density), and melting efficiency (cross-sectional area). The stability of weld pool shape and weld surface deformation was confirmed experimentally by changing the welding position. The arc current and translational velocity were the major factors in determining the weld pool stability as a function of the gravitational orientation. A 200A spot GTAW showed a significant variation of the weld pool formation as the arc held longer than 3 seconds, however the weld pool shape and surface morphology for a 165A spot GTAW were 'stable', i.e., constant regardless of the gravitational orientation. The cross-sectional area of the weld (CSA) was one of the critical factors in determining the weld pool stability. The measured CSA ($13.5mm^2$) for the 200A spot GTAW showed a good agreement with the calculated CSA ($14.9mm^2$).

• 상하수도학회지
• /
• 제25권2호
• /
• pp.265-274
• /
• 2011

Nowadays, the importance of non-point source pollution treatment is being emphasized. Especially, the easy runoff characteristic of highly concentrated pollutants in the roads makes the circumstance more complicated due to impermeability of roads. When the pollutants flow into steam it could make water quality in stream worse and it also causes a bad influence in the aquatic ecosystem because the effluents of rainfall-runoff may contain indecomposable materials like oil and heavy metals. Therefore, we tried to figure out the property of non-point source pollution when it is raining and carried out an assessment for the property of runoff for non-point source pollution and EMC (Event Mean Concentrations) of the essential pollutants during this study. As the result of the study, the EMC was BOD 5.2~21.7 mg/L, COD 7.5~35.4 mg/L, TSS 71.5~466.1 mg/L, T-N 0.682~1.789 mg/L and T-P 0.174~0.378 mg/L, respectively. The decreasing rate of non-point pollutant in Chungyang-Hongsung road indicates the maximum decrease of 80% until 5 mm of rainfall based on SS concentration; by the rainy time within 20~30 minutes, the decreasing rate of SS concentration was shown as 88.0~97.6%. Therefore it was concluded that it seems to be possibly control non-point pollutants if we install equipments to treat non-point pollutants with holding capacity of 30 min. It is supposed that the result of this study could be used for non-point pollutants treatment of roads in Chungyang-Hongsung area. We also want to systematically study and consistently prepare the efficient management of runoff from non-point source pollution and pollutant loading because the characteristics of non-point source pollution runoff changes depending on different characteristics and situations of roads and rainfall.

• 한국식품조리과학회지
• /
• 제15권6호
• /
• pp.579-585
• /
• 1999

This study was conducted to evaluate the recognition of HACCP(Hazard Analysis Critical Control Point) concept by the industry foodservice managers in Pusan and the Kyung Nam areas and to suggest a guideline for an effective HACCP education program. A survey was conducted from 133 foodservice managers by using a questionnaire. The results were as follows; 68.0% industry foodservice managers were educated about HACCP concept, 33.8% didn't understand the concept, and only 13.4% understood the concept fully. On the application of HACCP program to the foodservice operation, 15.0% of managers always applied HACCP program, 35.4% often, and 49.6% did not. The reasons for not applying HACCP were the ignorance HACCP implementation method(36.7%), poor facilities of foodservice operations(34.7%), shortage of time(l4.3%), and difficult of HACCP principles(6.1%). The mean score of HACCP knowledge for all manager was 64.1, in which the educated manager showed significantly higher score than noneducated CP(0.01). The ratio of correct answers concerning HACCP was 80.5% for the pre-preparation stage, 60.3% for the receiving and storage stage, 57.0% for the hot and cold holding stage, 54.5% for the facilities sanitation stage, and 46.0% for the preparation stage. The mean score of HACCP knowledge was positively correlated with understanding of HACCP program as well as the application. Also, the implementation of HACCP program was positively correlated with the understanding of HACCP.

• Physical Therapy Rehabilitation Science
• /
• 제9권3호
• /
• pp.178-183
• /
• 2020

Objective: This study conducted in order to investigate the correlations between fall experience, balance, mobility, and confidence. We examined the difference between fall experience, and Berg Balance Scale (BBS), Timed-Up-and-Go test (TUG), Tinetti balance assessment (Tinetti balance [TiB], Tinetti gait [TiG]), and Activities-specific Balance Confidence (ABC) scale scores to see how fall experience, balance, mobility, and confidence of the persons with stroke affects their balance. Design: Cross-sectional study. Methods: Forty-one subjects participated in this study. The BBS includes 14 items, consisting of a 5-point scale from 0 to 4, totaling up to 56 points. The Timed Up and Go-Alone (TUGA) was used to measure the average time to take a 3 m round-trip by getting up and down from a 46-cm high chair with an armrest on a flat floor. The Timed-Up-and-Go-Cognitive (TUGC) was performed by counting backwards and the Timed Up and Go-Manual (TUGM) is performed by holding a cup full of water. The total score for the TiB is 16 points, and the TiG is 12 points, making a total of 28 points. There are 16 items total for the ABC scale. Results: According to the fall experience, BBS, the TUGA and TUGC values were significantly higher in the inexperienced group compared to the experienced group (p<0.05). The number of falls was significantly correlated with BBS, TUGA, TUGC, TUGM, TiB, TiG, TiB+TiG (p<0.05). Conclusions: This study supports that falls experience is strongly related to balance, mobility, and confidence. Optimal balance training programs for fall prevention is still insufficient and must be developed.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.132-136
• /
• 2017

We synthesized potassium hexatitanate, ($K_2Ti_6O_{13}$, PT6), with a non-fibrous shape, by acid leaching and subsequent thermal treatment of potassium tetratitanate ($K_2Ti_4O_9$, PT4), with layered crystal structure. By controlling nucleation and growth of PT4 crystals, we obtained splinter-type crystals of PT6 with increased width and reduced thickness. The optimal holding temperature for the layered PT4 was found to be ${\sim}920^{\circ}C$. The length and width of the PT4 crystals were increased when the nucleation and growth time were increased. After a proton exchange reaction using aqueous 0.3 M HCl solution, and subsequent heat treatment at $850^{\circ}C$, the PT4 crystal transformed into splinter-type PT6 crystals. The frictional characteristics of the friction materials show that as the particle size of PT6 increases, the coefficient of friction (COF) and wear amounts of both the friction materials and counter disc increase.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.282-286
• /
• 2016

A sintered body of $TiB_2$-reinforced iron matrix composite ($Fe-TiB_2$) is fabricated by pressureless-sintering of a mixture of titanium hydride ($TiH_2$) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and $1400^{\circ}C$ for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and $1400^{\circ}C$, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the ($FeB+TiH_2$) powder compacts sintered at $1400^{\circ}C$ for 2 h. Sintered compacts have two main phases of Fe and $TiB_2$ along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for $TiB_2$ formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine $TiB_2$ particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at $1400^{\circ}C$ for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.