• 동력기계공학회지
• /
• 제6권4호
• /
• pp.81-87
• /
• 2002

The modelling and controller design of the EMV(electro-magnetic valve) for vehicle engine are considered in this paper. For the analysis and controller design, the governing equation of the EMV system is derived. For a good performance of the system, the start control, the holding control and the swing control are included in the controller design of the EMV system. In order to reduce landing speed of the valve, the on-time delay control which mainly come from the optimal control theory is employed. In order to reduce the power consumption of the system, the pick-up and hold operation has been used for the magnetic coil. The simulation and experimental results are presented to show the validity of the control method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.25-32
• /
• 1998

This study suggested the practical method which can reduce the lead time of the field trial and design of the dies. The virtual manufacturing, with the die design is evaluated by computer analysis, reveals the impropriety of a design before making dies. Three methods for reducing the die making process occupying over 60% of the automotive development are like fellows : First, the crack virtually adjusting the blank holding force and draw bead force with a computer simulation. Second, the parts which can not remove the forming defects in spite of the adjustment of forming process parameters need to modify the part geometry or punch temporary shape. Third, the simulation before trial, field trial, and field trial simulation can be used effectively in the die design.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.28-37
• /
• 1987

To clarify the debonding phenomena of clad steel, the effect of thermal treatment (temperature, holding time) on the interfacial strength of clad steel was preliminarily investigated. From this study, it was confirmed that the interfacial strength of clad steel was deteriorated by thermal treatment and the amount of strength deteriorated, depending on the condition of thermal treatment, could be evaluated by the following equation. ${\sigma}_{ HT}/{\sigma}_{i}/=A_{0}-A\;exp(-Q/RT)log(t/t_{0})$ This equation implies that temperature has a far strong effect on strength deterioration than tiem. The deterioration of interfacial strength of clad steel after thermal treatment may be derived from the thermal stress caused by the difference in thermal expansion coefficient between component materials and microstructural change along the interface.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.11-18
• /
• 1987

Effects of electrode tips shapes of spot welding on the galvannealed steel have been studied, and the results obtained from this studies are as follows. 1) Expulsion had no effect on the shear strength of the specimen but been observed on the tensile strength of the specimen. 2) Effect of holding time after welding was neglegible when the spot welding supplies enough heat input. 3) Depending on the sopt welding tip shape it has different weldbility. It has better weldability in the order of pointed shape, truncated shape and dome shape. But the effect of coolind was just the opposite of the above order.

• 소성∙가공
• /
• 제13권7호
• /
• pp.623-628
• /
• 2004

This paper is concerned with pressure welding, which has been known as a main bonding mechanism during the cold and warm forming such as clad extrusion or bundle extrusion/drawing. Bonding characteristics between the Cu and Al plates by pressure welding are investigated focusing on the weak bonding. Experiments are performed at the cold and warm temperatures ranging from the room temperature to $200^{\circ}C$. The important factors examined in this work are the welding pressure, pressure holding time, surface roughness, and temperature. A bonding map, which can identify the bonding criterion with a weak bonding strength of IMPa , is proposed in terms of welding pressure and surface roughness fur the cold and warm temperature ranges.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (상)
• /
• pp.515-518
• /
• 2001

HTTP/1.0은 동일한 서버로부터 각각의 개체에 대하여 개별적인 TCP 연결을 생성하기 때문에 다중의 요구를 비효율적으로 처리한다. 이러한 문제를 해결하기 위한 방안으로 제안된 HTTP/1.1 은 TCP연결을 지속적인 연결(Persistent connection)이라는 개념을 도입하여 하나의 TCP 연결 상에서 다중의 요구(Request)를 처리하도록 하고 있다[9]. 네트워크가 발전됨에 따라 사용자가 늘어나고 다양해지면서 서비스의 차별화 문제가 중요한 문제로 대두되었다[3,5]. 본 논문에서 제시하는 Diff(Differentiated)-HTTP은 웹 서버에 서비스를 요청한 클라이언트들에게 차별화 된 서비스를 제공하기 위해서 사용자를 두 등급, 기본 등급과 우선 순위를 고려한 상위 등급으로 구분한다. 각 등급은 제한 시간(Holding Time)으로 차별화 되고 상위 등급에 속한 클라이언트에게 제한된 시간을 증가시켜 지연을 최소로 함으로써 고품질의 서비스를 제공하는 방안을 제안한다.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.48-54
• /
• 2019

Analytical and experimental study were carried out in order to achieve simultaneous coating and injection molding of an automotive armrest. A mold was designed to be included one core and two cavities, which were composed of a substrate cavity and a coating cavity. The materials used were PC/ABS for substrate and 2-component Polyurethane for coating. The predicted flow patterns were in good agreement with experimental results in injection molding and in-mold coating. Based on analysis and experiment, it was found that the optimal processing conditions were packing pressure of 90MPa and holding time of 7sec.

• International Journal of Computer Science & Network Security
• /
• 제22권8호
• /
• pp.45-54
• /
• 2022

In this study, a multi-objective robust job-shop scheduling (JSS) model was developed. The model considered multi-jobs and multi-machines. The model also considered uncertain processing times for all tasks. Each job was assigned a specific due date and a tardiness penalty to be paid if the job was not delivered on time. If any job was completed early, holding expenses would be assigned. In addition, the model added idling penalties to accommodate the idling of machines while waiting for jobs. The problem assigned was to determine the optimal start times for each task that would minimize the expected penalties. A numerical problem was solved to minimize both the makespan and the total penalties, and a comparison was made between the results. Analysis of the results produced a prescription for optimizing penalties that is important to be accounted for in conjunction with uncertainties in the job-shop scheduling problem (JSSP).

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.39-45
• /
• 2022

Sheet Metal Forming by Press Forming Process takes a lot of time and cost from mold design to manufacturing. Therefore, all of die-makers are continuously conducting research to reduce the number of mold processes or the size of blanks to reduce costs. In the case of Forming complex shapes such as automobile component, wrinkles and cracks occur, so draw beads are used. Draw beads play an important role in suppressing the inflow of materials and minimizing the size of blanks. Factors that affect material flow include draw bead, blank holding pressure, lubricant, and surface roughness of punch and die. Most of the factors affect friction. In this study, after classifying circular beads and rectangular beads in cylindrical drawing molds using the AutoForm analysis program, the factors affecting the material inflow were considered.

• 한국응용과학기술학회지
• /
• 제40권5호
• /
• pp.945-954
• /
• 2023

In this study, Sparassis crispa(cauliflower mushroom), which is rich in beta-glucan, was pulverized using ultrafine grinding technology for its potential utilization as a diverse food ingredient. The physical and antioxidant properties of cauliflower mushroom powder were evaluated at various grinding times. The results showed that as the grinding time of cauliflower mushroom increased, the average particle size significantly decreased (p<0.05). Additionally, the water-holding capacity, swelling capacity, and water solubility index of cauliflower mushroom increased significantly(p<0.05). Based on the analysis mentioned above, cauliflower mushroom prepared as a superfine powder for 5 minutes exhibited superior physical and chemical properties as well as antioxidant characteristics and is expected to be widely used in various foods.