• 제목/요약/키워드: Holding Time

검색결과 1,052건 처리시간 0.033초

조정사건을 통해 살펴본 주요 쟁점사항과 해결방안에 대한 연구 - 부산지방노동위원회의 사례를 중심으로 - (A Study on the Main Issue and Its Solution Explored through Mediation Cases - Focused on the Cases of Busan National Labor Relations Commission -)

  • 송경수;김용호
    • 경영과정보연구
    • /
    • 제30권4호
    • /
    • pp.253-292
    • /
    • 2011
  • 조정위원으로 활동하고 있는 동안 조정현장에서 경험했던 내용을 중심으로 지역노사관계의 원만한 관계 정립을 위해 조정제도의 시사점을 모색하고, 조정사례를 분석하여 노사관계에서 핵심적인 이슈가 무엇인지를 찾아 사전에 쟁의사건을 최소화할 수 있는 방안을 탐색하는 데 의의가 있다. 특히 쟁의의 쟁점을 사안별로 분석하여 이를 최소화함으로써 쟁의 발생을 사전에 차단하고 이를 통해 원만한 노사관계를 정립하고자 하는 목적도 함께 가지고 있다. 특히 노동쟁의 조정에 관한 구체적인 내용을 이해하기 위해서는 지방노동위원회의 구성과 역할에 대해 먼저 이해를 해야 할 필요성이 있어 이와 관련된 내용도 구체적으로 알아보고 사례분석을 통해 조정에 관한 일반적 이해를 구하고자 한다. 또한 지금까지 노동위원회에 조정 의뢰한 핵심이슈들을 중심으로 노동위원회의 위상제고와 핵심이슈 분석을 통한 합리적 노사관계 정립을 위한 대안적 연구를 진행한 연구들은 거의 없다. 따라서 핵심쟁점별로 분석된 내용을 토대로 단체교섭이나 임금 교섭시 노사가 취해야 할 접근방식에 대한 사전교육이나 숙지를 통한 협상력을 높일 수 있는 기법을 제고시키는 이론적 근거를 마련할 수 있을 것이다.

  • PDF

냉장저장중 사슴고기의 이화화적 성질의 변화 (Changes in Physio-Chemical Properties of Deer Meat Cold Storage at 4°C and -2°C)

  • 신택순;강한석;김선구;이길왕
    • 생명과학회지
    • /
    • 제15권4호
    • /
    • pp.522-527
    • /
    • 2005
  • [ $4^{\circ}C$ ]와 $-2^{\circ}C$보관한 배최장근과 대퇴근 모두 저장기간이 경과함에 따라서 보수성은 감소하였고, 배최장근의 변화가 대퇴근의 변화보다 크게 나타났다 $4^{\circ}C$저장구보다 $-2^{\circ}C$저장한 사슴육이 낮은 TBARS가를 나타내어 저장기간 연장이 가능하였다. $4^{\circ}C$$-2^{\circ}C$에 저장한 사슴육의 VBN가는 저장 15일간 가식권에 있었고, 저장온도에 따른 차이는 크게 나타나지 않았다. 저장기간 경과에 따라서 배최장근과 대퇴근 모두 pH는 증가하는 경향이었고, $-2^{\circ}C$저장구가 $4^{\circ}C$저장구보다 낮은 pH를 나타내었다. 육의 연화는 $4^{\circ}C$에서는 두드러졌으나, $-2^{\circ}C$에서는 지연시키는 경향을 나타내어 $-2^{\circ}C$저장이 저장기간 연장에 효과가 있었다. $-2^{\circ}C$ 저장구가 $4^{\circ}C$저장구 보다는 자기가 어둡게 나타났고, 적색도는 $-2^{\circ}C$가 높게 나타났으며, 황색도는 저장기간 경과에 따라 $-2^{\circ}C$저장구의 변화가 크게 나타났다.

「역대가(歷代歌)」를 통해 본 옥동(玉洞) 이서(李漵)의 역사인식(歷史認識) (Okdong Lee Seo's Historical View Examined through Yeokdaega)

  • 윤재환
    • 동양고전연구
    • /
    • 제57호
    • /
    • pp.331-357
    • /
    • 2014
  • 이 글은 옥동(玉洞) 이서(李?)의 장편 영사시(詠史詩) "역대가(歷代歌)"를 대상으로, 그 속에서 확인되는 옥동의 역사인식을 살펴보고자 한 글이다. 옥동 이서가 도덕적 수양을 최상의 가치에 둔 도학자(道學者)였다는 점에서 옥동의 "역대가"는 유가적(儒家的) 인식세계(認識世界)와 구분하여 설명하기 어렵다고 할 수 있다. 옥동의 "역대가"는 7언 526구로 구성된 장편(長篇) 고시(古詩)인데, 지금까지 알려진 "역대가" 계열의 작품들과 그 구성에서 상당한 차이를 보인다. 옥동의 "역대가"는 두 개의 큰 단락으로 구성되어 있는데, 첫 번째 단락은 태초부터 명(明)나라 멸망시기까지 중국의 사적을 서술한 부분이고, 두 번째 단락은 당대 현실의 부조리를 서술하여 현실에 대한 강한 비판의식을 드러낸 부분이다. 일반적으로 "역대가" 계열의 작품들이 역사적 사건을 소재로 하여 치란(治亂)과 흥망(興亡)의 사적만을 이야기하는 것과는 다른 모습이다. 옥동의 "역대가"는 그의 유가적(儒家的) 역사인식(歷史認識)을 바탕으로 창작된 것이라 생각된다. 옥동에게 중국 역대 왕조의 흥망성쇠는 역사적 사실로 의미를 지니는 것이 아니라 현재를 살아가는 사람들이 도덕적 수양을 추구해야 할 이유를 설명해 주는 도구로 작용하였다고 보인다. 옥동은 자신이 익힌 중국 역대 왕조의 흥망성쇠와 현실의 부조리에 대한 예리한 비판, 그리고 도덕적 수양의 필요성에 대한 자극을 모두 더하여 526구의 장편 영사시 "역대가"를 창작하였다. 그런 점에서 옥동의 "역대가"는 예술성을 목적으로 하는 순수한 문학 활동의 결과물이라고 하기에는 쉽지 않은 부분이 있다. 그러나 옥동의 "역대가"는 그 나름의 문학성을 통해 이전까지 저작된 여타의 "역대가" 작품들과 비교하여 문학적으로 뒤지지 않는 모습을 보여준다. 특히 옥동의 "역대가"는 문학성과 함께 그 스스로의 학습과 자기 신념의 강화를 위한 수단이면서 동시에 그와 그의 주변에 있는 사람들을 위한 교육의 도구였다는 점에서 더 큰 의미를 지닌다고 할 수 있다.

기상청 농업기상관측망 토양수분 관측자료 보정식 개발 (Development of Correction Formulas for KMA AAOS Soil Moisture Observation Data)

  • 최성원;박주한;강민석;김종호;손승원;조성식;전현정;정기열
    • 한국농림기상학회지
    • /
    • 제24권1호
    • /
    • pp.13-34
    • /
    • 2022
  • 기상청은 농작물의 생육 및 관개를 비롯한 여러 농경활동에 미치는 토양수분의 중요성을 인식하고, 전국 11개 농업기상 관측지점에서 관측을 수행하고 있다. 그러나 이 자료가 폭넓게 활용되지 못하고 있어 우선적으로 관측자료의 신뢰도를 확보할 필요가 있다. 이 연구에서는 현업 토양수분 자료의 정확도를 검증하고, 품질 향상을 위해 적용할 보정식을 개발하는데 목표를 두었다. 먼저 관측 노장의 토양을 채취하여 토양수분함량에 영향을 미치는 용적밀도, 용적수분함량, 토성 및 보수력 등의 물리적 성질을 분석하였다. 토성은 대부분의 관측지점에서 모래가 주성분인 사양토 또는 양질사토로 분류되었으며, 1.5 g/cm3 내외의 용적밀도를 나타냈다. 미사와 점토 함량이 상대적으로 높았던 능주와 익산 지점은 용적밀도와 보수력도 다른 곳보다 더 높게 나타난 것으로 볼 때, 토성과 용적밀도, 보수력 사이에 밀접한 연관성이 있는 것으로 판단된다. 자체 설계·제작한 '레퍼런스 토양수분 관측시스템'에 이러한 관측지 토양의 특성을 반영하여 레퍼런스 센서로 사용할 EnviroSCAN 모델의 실험실 보정이 이루어졌다. 보정 작업은 load cell에서 측정한 무게 변화로부터 계산된 토양수분함량과 보정할 센서의 측정값을 비교하는 방식으로 진행되었으며, 제조사의 default 보정식에 대해 추가 보정의 필요성은 없는 것으로 결정되었다. 보정이 완료된 레퍼런스 센서와 현업 센서의 비교 관측 실험이 11개 각 지점에서 3회 이상 실시되었다. 전반적으로 레퍼런스 센서와 현업 센서의 측정값이 변화하는 패턴은 유사하게 나타났지만, 현업 센서가 레퍼런스 센서에 비해 상대적으로 토양수분을 과소평가하는 지점이 많았다. 두 센서 간의 편차는 장기간 건조 상태가 지속될 경우 일정한 추세를 유지하지만, 강수가 빈번한 시기에는 그 양상이 복잡해지는 특징이 있다. 비교 관측 실험의 결과를 바탕으로 각 기간별로 두 센서에 의해 관측된 자료의 범위와 평균을 이용하여 지점 및 깊이별 선형보정식을 개발하였다. 이 보정식을 수원 지점에 시범적으로 적용하여 뚜렷한 개선효과를 확인하였다. 또한 연속데이터에 보정식을 적용할 수 있도록 보정식이 산출되지 않은 기간의 구체적인 보정값 산정 방법도 제시하였다. 이 연구의 결과를 종합해 보면, 모든 관측지점에 대해 1년에 2회 정도의 주기적인 보정 작업이 토양수분 관측자료의 품질 향상을 위해 필수적인 것으로 판단된다.

진공 텀블링을 이용한 해동 돈육의 이화학적 및 조직학적 특성 (Physicochemical and textural properties of thawed pork by vacuum tumbling)

  • 박수진;홍원호;오승민;조창희;천지연
    • 한국식품저장유통학회지
    • /
    • 제31권3호
    • /
    • pp.423-432
    • /
    • 2024
  • 본 연구에서는 육가공 산업의 필수 공정인 냉동육 해동 시 발생하는 식육의 품질 저하를 최소화하기 위하여 진공 텀블링 해동 방식을 적용하고자 산업용 국산 임펠러-진공 텀블러(DVT, 6 ton)를 고안하고 이를 이용하여 해동한 냉동 돈육의 품질 특성을 현재 상업적으로 이용하는 자연해동(NTA)과 수입산 진공 텀블링 해동(IVT) 특성과 비교 분석하였다. 냉동 돈육(앞다리)의 자연해동 시간은 4,200분인데 반하여 DVT 해동은 165분이 소요되어 냉동 돈육 해동시간이 약 25배 단축되었다. 해동 시 돈육의 드립감량은 자연해동 2.08%에 비하여 DVT 해동은 0.85%로 낮아져 높은 해동 수율(99.2%)을 얻을 수 있었다. 자연 해동육에서 대장균군이 0.10±0.17 log CFU/g 수준으로 검출된데 반하여 DVT 해동육의 pH는 5.92, 총균수 1.96±0.01 log CFU/g, 대장균군 불검출로 높은 신선도를 보였다. 또한, DVT 해동육의 지방산패도(TBARS) 0.31±0.01 MDA mg/kg와 단백질변패도(VBN) 5.67±1.98 mg%를 보여 자연해동 돈육(각각 0.42±0.01 MDA mg/kg와 6.86±0.00 mg%)에 비해 지방과 단백질 변패도를 유의적으로 낮출 수 있는 것으로 나타났다. DVT 해동육의 보수력은 97.50±0.90%로 자연해동육(95.24±0.03%)에 비해 유의적으로 높았다. 자연해동(NTA) 후 조리한 돈육은 경도 212.03±0.02 N과 씹힘성 885.36±0.80이 진공 텀블링(DVT, IVT) 해동육에 비하여 각각 6.1배와 4.7배 높게 나타나 진공 텀블링 해동이 부드러운 조직감을 갖는 식육을 생산할 수 있는 것으로 나타났다. 해동육과 이를 가열조리한 돈육의 미세구조(SEM)를 관찰한 결과, 진공 텀블링 해동(DVT, IVT) 시료에서 근원섬유의 손상이 적어 섬유배열과 간격이 촘촘한 구조를 나타냈다. 본 연구에서 국내 최초로 고안한 산업용 대용량 진공텀블러는 해동 시 근육 조직의 손상을 최소화하여 보수력을 높이고, 드립감량을 감소시켜 부드러운 조직감과 함께 생산 수율을 높일 수 있을 뿐만 아니라 미생물학적 및 이화학적 변패도를 최소화할 수 있어 고품질의 육제품 생산에 활용될 수 있을 것으로 보인다. 또한, 본 장치는 수입산 진공텀블러와 비교해 우수한 품질의 해동육을 생산할 수 있어 본 연구자료를 이용한 국산 기술 자립화, 제품 품질 개선 및 수율 향상 등 육가공 산업 발전에 기여할 수 있을 것이라 사료된다.

동결보호제의 종류 및 배발달단계가 OPP Vitrification 동결보존시 생쥐수정란의 생존성에 미치는 영향 (Effect of Cryoprotectant Kinds and Cell Stages on the Viability of Mouse Embryos Cryopreserved by OPP Vitrification)

  • 공일근;조성균;조성근
    • 한국가축번식학회지
    • /
    • 제23권1호
    • /
    • pp.85-92
    • /
    • 1999
  • 본 연구는 동결동결보호제의 종류와 배발달단계가 생쥐의 OPP vitrification 동결방법에 미치는 영향을 알아보고자 실시하였다. 동결속도, 동결보호제 및 배발달단계는 vitrification 방법에 따른 수정란의 생존성에 영향을 미칠 수 있다. 본 연구에 사용된 동결보존액은 40% (v/v) ethylene glycol, 18% (w/v) Ficoll, 0.3 M sucrose와 5% FCS가 첨가된 D-PBS (EFS) 및 16.5% ethylene glycol, 16.5% dimethyl sulfoxide, 0.5 M sucrose 와 5% D-PBS (EDS)을 이용하였다. 배반포기배는 hCG 처리후 90시간째에 자궁으로부터 채취하여 실험 1에 이용하였고, 실험 2와 3에서는 zygote 를 hCG 처리후 18시간에 난관에서 채취하여 mHTF 배양액에 5% $CO_2$, 37$^{\circ}C$ 조건하에 배양하면서 2-, 4-, 8-cell, compacted morula, 또는 blastocyst를 이용하였다. 실험 1에서 배반포기배의 적당한 동결보존액을 결정하기 위하여 EFS 또는 EDS로 OPP vitrification 을 실시하였다. 재확장배반포기에 의한 생존율은 대조군과 EDS 처리군 (100, 100%) 이 EFS 군 (95.0%) 보다 유의적 (P<0.05)으로 높게 나타났으나, 부화배반포기에서는 EFS 군 (90.0%) 이 대조군 (100%) 및 EDS 군 (95.0%) 보다 유의적으로 낮은 발달율을 보였다. 실험 2에서는 zygote, 2-, 4-, 8-cell, 상실배 빛 배반포기 등의 초기배에서도 OPP vitrification 동결방법이 적당한지를 판단하기 위하여 실시하였다. Zygote (70.0%) 는 동결융해 후 배발달율이 2, 4, 8, 상실배 및 배반포기배에 비하여 유의적으로 낮은 발달율을 보였다 (89.7, 90.0, 92.8, 97.6 및 97.5%) (P<0.05). 또한 동결융해란의 할구수에서는 대조군 및 배반포기배 (35.7$\pm$2.98 및 39.6$\pm$2.81)에서 zygote, 2-, 4- 8-cell, 상실배 (29.8$\pm$3.21, 31.3$\pm$3.83, 29.3$\pm$3.58, 28.9$\pm$3.21 및 30.8$\pm$2.93) 보다 유의적으로 높게 나타났다 (P<0.05) 실험 3에서는 zygote의 VS1 에 노출시간에 따른 생존율을 조사한 결과 융해후 2-cell (91.6, 88.5 및 88.9%) 및 배반포기 (83.3, 74.3 및 69.4%) 까지 배발달율은 1,2 및 3분간의 노출시간에 따른 유의적인 차이를 보이지 않았다. 또한 융해후 노출시간에 따른 할구수에서도 유의적인 차이를 보이지 않았다 (36.4$\pm$4.76, 32.4$\pm$4.67 및 27.6$\pm$4.52). 이상의 결과에서 OPP vitrification 방법은 EFS 또는 EDS 동결보존액에 따른 유의적인 차이 없이 이용될 수 있는 것으로 판단된다. 배발달단계에 따른 생존율은 zygote 의 초기배는 2, 4, 8, 상실배 및 배반포기보다 유의적으로 저조한 생존율을 보였다. Zygote의 VS1에 노출시간에 따른 생존율도 1 분간의 노풀시간에서 높은 배발달율을 보였다. OPP vitrification 동결보존방법으로 생쥐수정란의 동결보존에 유용하게 이용가능한 것으로 판단된다.

  • PDF

항공기(航空機) 사고조사제도(事故調査制度)에 관한 연구(硏究) (A Study on the System of Aircraft Investigation)

  • 김두환
    • 항공우주정책ㆍ법학회지
    • /
    • 제9권
    • /
    • pp.85-143
    • /
    • 1997
  • The main purpose of the investigation of an accident caused by aircraft is to be prevented the sudden and casual accidents caused by wilful misconduct and fault from pilots, air traffic controllers, hijack, trouble of engine and machinery of aircraft, turbulence during the bad weather, collision between birds and aircraft, near miss flight by aircrafts etc. It is not the purpose of this activity to apportion blame or liability for offender of aircraft accidents. Accidents to aircraft, especially those involving the general public and their property, are a matter of great concern to the aviation community. The system of international regulation exists to improve safety and minimize, as far as possible, the risk of accidents but when they do occur there is a web of systems and procedures to investigate and respond to them. I would like to trace the general line of regulation from an international source in the Chicago Convention of 1944. Article 26 of the Convention lays down the basic principle for the investigation of the aircraft accident. Where there has been an accident to an aircraft of a contracting state which occurs in the territory of another contracting state and which involves death or serious injury or indicates serious technical defect in the aircraft or air navigation facilities, the state in which the accident occurs must institute an inquiry into the circumstances of the accident. That inquiry will be in accordance, in so far as its law permits, with the procedure which may be recommended from time to time by the International Civil Aviation Organization ICAO). There are very general provisions but they state two essential principles: first, in certain circumstances there must be an investigation, and second, who is to be responsible for undertaking that investigation. The latter is an important point to establish otherwise there could be at least two states claiming jurisdiction on the inquiry. The Chicago Convention also provides that the state where the aircraft is registered is to be given the opportunity to appoint observers to be present at the inquiry and the state holding the inquiry must communicate the report and findings in the matter to that other state. It is worth noting that the Chicago Convention (Article 25) also makes provision for assisting aircraft in distress. Each contracting state undertakes to provide such measures of assistance to aircraft in distress in its territory as it may find practicable and to permit (subject to control by its own authorities) the owner of the aircraft or authorities of the state in which the aircraft is registered, to provide such measures of assistance as may be necessitated by circumstances. Significantly, the undertaking can only be given by contracting state but the duty to provide assistance is not limited to aircraft registered in another contracting state, but presumably any aircraft in distress in the territory of the contracting state. Finally, the Convention envisages further regulations (normally to be produced under the auspices of ICAO). In this case the Convention provides that each contracting state, when undertaking a search for missing aircraft, will collaborate in co-ordinated measures which may be recommended from time to time pursuant to the Convention. Since 1944 further international regulations relating to safety and investigation of accidents have been made, both pursuant to Chicago Convention and, in particular, through the vehicle of the ICAO which has, for example, set up an accident and reporting system. By requiring the reporting of certain accidents and incidents it is building up an information service for the benefit of member states. However, Chicago Convention provides that each contracting state undertakes collaborate in securing the highest practicable degree of uniformity in regulations, standards, procedures and organization in relation to aircraft, personnel, airways and auxiliary services in all matters in which such uniformity will facilitate and improve air navigation. To this end, ICAO is to adopt and amend from time to time, as may be necessary, international standards and recommended practices and procedures dealing with, among other things, aircraft in distress and investigation of accidents. Standards and Recommended Practices for Aircraft Accident Injuries were first adopted by the ICAO Council on 11 April 1951 pursuant to Article 37 of the Chicago Convention on International Civil Aviation and were designated as Annex 13 to the Convention. The Standards Recommended Practices were based on Recommendations of the Accident Investigation Division at its first Session in February 1946 which were further developed at the Second Session of the Division in February 1947. The 2nd Edition (1966), 3rd Edition, (1973), 4th Edition (1976), 5th Edition (1979), 6th Edition (1981), 7th Edition (1988), 8th Edition (1992) of the Annex 13 (Aircraft Accident and Incident Investigation) of the Chicago Convention was amended eight times by the ICAO Council since 1966. Annex 13 sets out in detail the international standards and recommended practices to be adopted by contracting states in dealing with a serious accident to an aircraft of a contracting state occurring in the territory of another contracting state, known as the state of occurrence. It provides, principally, that the state in which the aircraft is registered is to be given the opportunity to appoint an accredited representative to be present at the inquiry conducted by the state in which the serious aircraft accident occurs. Article 26 of the Chicago Convention does not indicate what the accredited representative is to do but Annex 13 amplifies his rights and duties. In particular, the accredited representative participates in the inquiry by visiting the scene of the accident, examining the wreckage, questioning witnesses, having full access to all relevant evidence, receiving copies of all pertinent documents and making submissions in respect of the various elements of the inquiry. The main shortcomings of the present system for aircraft accident investigation are that some contracting sates are not applying Annex 13 within its express terms, although they are contracting states. Further, and much more important in practice, there are many countries which apply the letter of Annex 13 in such a way as to sterilise its spirit. This appears to be due to a number of causes often found in combination. Firstly, the requirements of the local law and of the local procedures are interpreted and applied so as preclude a more efficient investigation under Annex 13 in favour of a legalistic and sterile interpretation of its terms. Sometimes this results from a distrust of the motives of persons and bodies wishing to participate or from commercial or related to matters of liability and bodies. These may be political, commercial or related to matters of liability and insurance. Secondly, there is said to be a conscious desire to conduct the investigation in some contracting states in such a way as to absolve from any possibility of blame the authorities or nationals, whether manufacturers, operators or air traffic controllers, of the country in which the inquiry is held. The EEC has also had an input into accidents and investigations. In particular, a directive was issued in December 1980 encouraging the uniformity of standards within the EEC by means of joint co-operation of accident investigation. The sharing of and assisting with technical facilities and information was considered an important means of achieving these goals. It has since been proposed that a European accident investigation committee should be set up by the EEC (Council Directive 80/1266 of 1 December 1980). After I would like to introduce the summary of the legislation examples and system for aircraft accidents investigation of the United States, the United Kingdom, Canada, Germany, The Netherlands, Sweden, Swiss, New Zealand and Japan, and I am going to mention the present system, regulations and aviation act for the aircraft accident investigation in Korea. Furthermore I would like to point out the shortcomings of the present system and regulations and aviation act for the aircraft accident investigation and then I will suggest my personal opinion on the new and dramatic innovation on the system for aircraft accident investigation in Korea. I propose that it is necessary and desirable for us to make a new legislation or to revise the existing aviation act in order to establish the standing and independent Committee of Aircraft Accident Investigation under the Korean Government.

  • PDF

점적관개 시 토성별 습윤.건조 특성 비교 (Comparison of Wetting and Drying Characteristics in Differently Textured Soils under Drip Irrigation)

  • 김학진;손동욱;허승오;노미영;정기열;박종민;이중용;이동훈
    • 생물환경조절학회지
    • /
    • 제18권4호
    • /
    • pp.309-315
    • /
    • 2009
  • 본 연구에서는 정밀관수를 위한 관수시간, 점적라인 설치 등 관수시스템 설계를 위한 기초 데이터를 얻고자 점적관수 시 토성에 따른 물의 수분함량변화를 공간적, 시간적 변이의 차이를 구명하였다. 20cm의 간격의 노즐로 설치된 1열 점적관을 이용 관수 하였을 경우 양토와 사양토내의 수분은 중심을 따라 대칭 형태를 유지하면서 이동하였으나 수분확산 폭은 양토가 더 넓고 속도가 느린 경향을 나타내었다. 상대적으로 높은 모래성분 함량을 갖는 양질사토의 경우는 낮은 수분 보유력으로 인하여 위치별 수분함량의 변화는 상대적으로 낮았으며 그만큼 물 빠짐정도가 큰 것으로 나타났다. 관수개시점과 종말점을 고려하였을 때 사양토의 경우 20cm 깊이에서 관수개시 30분 후에 수분의 포화가 이루어졌으나 양토와 양질사토의 경우는 약 80분이 소요되어 효율적인 수분공급 측면에서 관수시간은 토성별로 달리해야 하는 것으로 나타났다. 깊이 10cm에서의 시간에 다른 토양수분의 감쇠특성은 지수함수의 형태를 나타내었으며 토양별 안정된 상태에서의 수분함량은 양토, 사양토, 양질사토 각각 17.6%, 6.2%, 4.2%로 예측되어 토성에 따라 잔여수분함량은 차이가 있음을 확인하였다. 토양수분함량과 토양수분퍼텐셜과의 관계를 나타내는 수분특성곡선은 시험 토양의 경우 모두 높은 결정계수를 갖는 지수함수로 근사가 가능하여 수분퍼텐셜을 이용하여 측정하는 재배시스템에서 대응하는 수분함량 예측에 유용한 관계식을 얻었다.

대한지리학회 창립 50주년 기념 국제지리학술대회와 지리학의 당면 과제 (The International Geographical Symposium for the 50th anniversary of the Korean geographical society:the pressing problems in Korean geography)

  • 이학원
    • 대한지리학회지
    • /
    • 제30권2호
    • /
    • pp.188-199
    • /
    • 1995
  • 대한지리학회가 1945년 9월 11일에 창립되어 50주년을 맞았다. 이를 기념하기 위하 여 국제지리학술대회를 1995년 10월 13일, 14일 이틀에 걸쳐 서울대학교 교수회관에서 개최 하기로 결정하였다. 이 대회에서 논의될 주제는 분단국토의 현실과 통일국토의 미래상, 21세 기 한국 지리학의 도전, 한국 지리학의 반세기-회고와 전망이라는 3가지가 중심이 된다. 이 번 학술대회를 통하여 2000년에 개최할 IGC서울대회를 성공적으로 이끌 역량을 축적하고, 지리학의 연구내용이 결국 인간생활의 질을 향상시키는데 기여해야만 학문적 영속성과 가치 를 인정받을 수 있다는 진실을 인식하는 계기가 되어야 한다.

  • PDF

우리나라 양곡가공공장의 현황분석 (The Profile of Milling Plants in Korea)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • 제3권1호
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF