• Title/Summary/Keyword: Holding Time

Search Result 1,046, Processing Time 0.035 seconds

Selection of Postweld Heat Treatment Condition of a High-Temperature and High-Pressure Forged Valve (고온고압용 단조밸브의 용접후열처리 조건 선정)

  • Park, Jae-Seong;Heo, Ki-Moo;Yoon, Sung-Hoon;Moon, Yoon-Jae;Lee, Jae-Heon
    • Plant Journal
    • /
    • v.10 no.2
    • /
    • pp.48-59
    • /
    • 2014
  • Coupons which have same figure as weld joint of the forged steel valves and 1 inch nominal weld thickness were manufactured using ASTM A182 F92 material. After welding with GTAW method, the welded specimens have been post-weld heat treated at $705^{\circ}C$, $735^{\circ}C$, $750^{\circ}C$, $765^{\circ}C$, $795^{\circ}C$ and $825^{\circ}C$ for 1 hour per 1 inch nominal weld thickness each (Group 1) to evaluate characteristics of welds based on various holding temperature. Indeed, 3 welded specimens were post-weld heat treated for 30 minutes, 1 hour and 2 hour (Group 2) at $735^{\circ}C$ to evaluate characteristics of welds based on various holding time. Hardness values were measured at the weld metal, heat affected zone and base metal to observe hardness change depending on the condition. As a result of the evaluation, appropriate holding temperature for PWHT is proved as $750^{\circ}C$ and $765^{\circ}C$ for 1hour per 1 inch nominal weld thickness. Indeed, holding for 1 hour per 1 inch nominal weld thickness was insufficient for PWHT effect when the holding temperature was at $735^{\circ}C$. The microstructure of post-weld heat treated weld metal was determined as tempered-martensite structure.

  • PDF

Improvement of Altitude Measurement Algorithm Based on Accelerometer for Holding Drone's Altitude (드론의 고도 유지를 위한 가속도센서 기반 고도 측정 알고리즘 개선)

  • Kim, Deok Yeop;Yun, Bo Ram;Lee, Sunghee;Lee, Woo Jin
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.6 no.10
    • /
    • pp.473-478
    • /
    • 2017
  • Drones require altitude holding in order to achieve flight objectives. The altitude holding of the drone is to repeat the operation of raising or lowering the drone according to the altitude information being measured in real-time. When the drones are maintained altitude, the drone's altitude will continue to change due to external factors such as imbalance in thrust due to difference in motor speed or wind. Therefore, in order to maintain the altitude of drone, we have to exactly measure the continuously changing altitude of the drone. Generally, the acceleration sensor is used for measuring the height of the drones. In this method, there is a problem that the measured value due to the integration error accumulates, and the drone's vibration is recognized by the altitude change. To solve the difficulty of the altitude measurement, commercial drones and existing studies are used for altitude measurement together with acceleration sensors by adding other sensors. However, most of the additional sensors have a limitation on the measurement distance and when the sensors are used together, the calculation processing of the sensor values increases and the altitude measurement speed is delayed. Therefore, it is necessary to accurately measure the altitude of the drone without considering additional sensors or devices. In this paper, we propose a measurement algorithm that improves general altitude measurement method using acceleration sensor and show that accuracy of altitude holding and altitude measurement is improved as a result of applying this algorithm.

A study on the distribution basis and aspect of teachers holding additional school health (양호겸직교사의 배치근거 및 분포양상)

  • Lee, Jeong Yim
    • Journal of the Korean Society of School Health
    • /
    • v.2 no.1
    • /
    • pp.58-90
    • /
    • 1989
  • This study was attempted to contribute to the development of school health by providing the basic data about the distribution basis and distribution aspect of teachers holding additional school health that are in charge of school health business in parimary schools, middle schools and high schools without any nurse-teacher. This study analyzed literatures about the history, related laws, organization and professional manpower of school health. The emphasis was set on the distribution basis of theachers holding additional school health. The results of this study are as following: 1. The school health of the world dates to the late 18th century in Europe where was free supplying with food for poor children. The school health of Korea orginated from smallpox vaccination which was executed with appearance of modern schools in the late 19th century. 2. The related laws of school health began as a part of Education Law with was constituted in 1949. By the School Health Law constituted in 1967 and the enforcement ordinance of School Health made firm the legal basis of school health. 3. The administrative organs of school health are the Ministry of Education in center and each Board of Education in cities and provinces. For the first time in 1979, the department of school health was established in the organization of the Ministry of Education. And at about the same time of establishment of the department of school health, health section was established in the department of social physical-training in locality. 4. In the manpower of school health which was presented in the related statute of school health, there are the ward chief of education, the superintendent of educational affair, of cities and districts, the mayors, the governors of provinces, the school managers, the principals, the school doctors, the school pharmacists, and the nurse-teachers, including teachers holding additional school health as the practical manpower of school health. 5. In order to get some information on distribution aspect of teachers additional school health, this study made up a questionnaire from August 3 to August 11, 1988. The subjects of this study were 212 leachers who took part in the yearly training for teachers holding additional school health from Kyunggi province, Chungbuk province and Jeonbuk province. The results of the questionnaire are as following: 1. The distribution percentages of teachers holding additional school health according to each Board of Education wich schools are subject to, are as following:70.1% (Kyunggi), 76.5% (Chungbuk), and 81.4% (Jeonbuk). There was a significant difference. The distribution percentages of teachers holding additional school health according to the school levels of 3 provinces are as following: 74.1% (Primary schools), 77.8% (Middle schools), 76.7% (High schools). There were little significant differences. 2. The distribution according to the general characteristics of the subject schools: There were 64.2 percent of primary schools and 35.8 percent of middle schools among 212 schools. 91. 5 percent of schools were located in districts. Public schools formed 55.7% and then national schools were higher in percentage than private schools. 58.5 percent of schools had 1-9 classes, 64.6 percent of schools had 101-500 students, and 90 percents of schools had 1-20 teachers. In considering student sex, the coed school showed the high distribution percentage (Primary schools : 100%, Middle schools: 81.6%). 3. The distribution according to the characteristics of teachers holding additional school health: 93.3 percent of teachers were female, and more than 60 percent of teachers were 20-29 years old. As the age got higher, the percentage became lower. There were little significant differences by marital status. In considering their educational status, 86.8 percent of teachers in primary schools were from teacher's colleges, and 64.5 percent of teachers in middle schools were from education colleges. In considering teaching career, 46.7 percent of teachers had teaching career of less than 2 years. 73.6 percent of teachers had held additional school health for less than one year. More than 80 percent of teachers had participated in the training one time or twice. More than 70 percent of teachers had 1-2 additional jobs except for the school health business. The motivation to hold additional school health is most caused by mandatory order, which accounts for more than 80.0 percent. In considering interesting degree concerning school health, lukewarm answer is the highest of 62.7 percent, followed by affirmative answer of 23.6 percent. In considering their contentment degree respecting additional school health job, "discontent or very discontent"is the highest of 47.6 percent. As a descontent reason of additional school health job, overwork is the highest factor of 37.9 percent. Among addiitional school health job, the most difficult affair is nursing service to be 34.0 percent, followed by health education of 31.6 percent. It testify the need of professional. The source of knowledge about school health has been acquired from masscommunication or private health experience, which account for as much as 56.1 percent. It shows seriousness of lack of professionalism. With regard to neccessity of school health experts, 95.8 percent represents absolute need. With above consideration of study results, I propose as follows : 1. I propose that the authorities concerned unify and improve statute respecting current school health which has not been steadfastly supporting school health business by ambiguity of expression and dualization. 2. I propose that the authorities concerned give the school manager, school staffs and parents of students educational chance with which they can acknowledge the importance of school health and in which they can participate as well as set up alternative policy plan to be albe to vitalize school health committee. 3. I propose that administrative organization practicable to taking totally charge of school health business is established within the Ministry of Education. 4. I propose that the authorities concerned back up and cooperate in an attempt by make school health better and desirable toward development by way of appointing qualitied health teachers on the basis of legally regular teacher staffs.

  • PDF

A Preventive Replacement Model for Standby Systems (대기구조를 갖는 시스템의 예방 교체 모형)

  • Lee, Hyo-Seong
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.21 no.4
    • /
    • pp.555-570
    • /
    • 1995
  • We consider a preventive replacement policy for a cold-standby system with N components, in which only one component is in operation at a time. If the component in operation fails, a standby component is immediately switched into operation. If all components fail, the system fails. The system is inspected at random poins in time to determine whether it is to be replaced or not. If the number of failed components at the time of inspection exceeds a threshold value r, the system is replaced. Otherwise the decision is put off until the next inspection point arrives. Under the cost structure which includes a replacement cost, a system down-time cost and a holding cost of the components, we develop an efficient procedure to find the optimal control values N and r, which minimize the expected cost per unit time.

  • PDF

A study on optimization of injection molding of large thick LH type elastic frame (대형 후육 LH형 탄성구조 프레임의 사출성형 최적화에 관한 연구)

  • Lee, Sung-Hee
    • Design & Manufacturing
    • /
    • v.16 no.1
    • /
    • pp.62-69
    • /
    • 2022
  • In the present study, the injection molding optimization of a large thick LH type elastic frames for the reduction of warpage was performed. Two kinds of fine and coarse finite element models were prepared to investigate the efficiency of analysis time and quality on simulation results. In order to derive injection molding conditions that can minimize distortion of parts, it was investigated that the effects of mold temperature, resin temperature, injection time, hold pressure switching time, holding pressure and the hold time on deformation characteristics using the design of experiments. The main influential factors on the warpage were found from the optimization simulation and the geometry data of the warpage result was converted into an initial model for injection simulation. It was shown that a coarse model with good mesh quality could be adapted for mold design since the total analysis time using the proposed model was reduced to 1/10. The suggested inversed warpage model produced the best minimized result of warpage.

Push-out Test on Welded Angle Shear Connectors used in Composite Beams (합성보에 적용된 앵글 전단연결재의 Push-out 실험)

  • Kim, Young Ju;Bae, Jae Hoon;Ahn, Tae Sang;Jang, Dong Woon
    • Journal of Korean Society of Steel Construction
    • /
    • v.26 no.3
    • /
    • pp.155-167
    • /
    • 2014
  • Steel-concrete composite beam has been used for a considerable time in building construction. An essential component of a composite beam is the shear connection between the steel section and the concrete slabs, which is provided by mechanical shear connectors. A variety of shapes and devices have been in use as shear connectors. This study summarizes the results of an experimental investigation involving the testing of push-out specimens with angle shear connectors. All of 22 push-out specimens were designed to study the effect of a number of parameters on the shear capacity of angle shear connectors such as the height of the angle connector, the length of welding, and the pitch of angles. Based on the test results, a design equation was developed for predicting the shear strength of angle shear connectors.

Effect of Quenching Heat-treatment on Mechanical Properties and Microstructure of Modified C95600 Bronze (개량형 C95600 청동의 기계적 성질과 미세조직에 미치는 퀜칭 열처리의 영향)

  • Lee, Sung-Yul;Moon, Kyung-Man;Oh, Jae-Hwan;Shin, Dong-Il
    • Journal of Ocean Engineering and Technology
    • /
    • v.25 no.6
    • /
    • pp.97-104
    • /
    • 2011
  • Modified C95600 bronze contains Fe component of 0.7 weight percentage besides Cu-7Al-2.5Si composition. The shape of centrifugal cast is a circular pipe with thick wall. Specimens machined from the centrifugal cast were quenched in oil after isothermal holding at a given heat treatment temperature in the range of $700{\sim}900^{\circ}C$. Mechanical properties and structural morphology are depended on the quenching heat treatment temperature regardless of isothermal holding time. Tensile strength or Brinell hardness is increased with increasing heat treatment temperature. The microstructure caused by quenching contains mixing phases of ${\alpha}+{\beta}'+FeSi+{\kappa}$ which martensite of ${\beta}'$ phase has been transformed from ${\beta}$ phase. Effect of isothermal holding temperature on mechanical properties in case of quenching heat treatment attributes to the change of volume fraction of ${\beta}'$ on the structural morphology. Mechanical characteristics of specimen, initially quenched from $850^{\circ}C$, and then tempered at $500^{\circ}C$, does not show an obvious softening indication, because disappearance of ${\beta}'$ during tempering process can be compensated by precipitation of brittle phase ${\gamma}$.

Study on the Intensive Catching method of Anchovy for the Live Bait-IV Appearance of the Available Resource for the Live Bait in the South-eastern Coastal Waters of Korea (활멸치의 집약적 생상수단에 관한 연구 -IV)

  • Lee, Byoung-gee;Kim, Kwang-hong
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.15 no.2
    • /
    • pp.77-82
    • /
    • 1979
  • It is said that anchovy of 6 to 7 em in body length is the most suitable for the live bait in skipjack pole and line fishing, and it must be held in a creel for more than 7 days so as to be transported from the holding ground to the fishing ground, kept in the small bait hold in a fishing boat. To hold the live bait anchovy, holding creel should be settled in calm waters, and then it is necessary to investigate the appearance of the available resource in the south-eastern coastal waters of Korea where the creel can be settled. The authors investigated the app~arance of the available resource in the waters, and the following results are found. 1. The available resource appears more and the fishing season is longer than in the offshore, rather than in the inshore. 2. The available resource arc caught in the offshore with the passing of time into winter, and they are caught merely in the offshore side in December. 3. The available resource could be secured from July to December, somewhere in the south-eastern coastal waiers of Korea, if the holding ground were removed appropriately.

  • PDF

Decrease of PEMFC Performance by SO2 in Air (공기 중 SO2에 의한 고분자전해질 연료전지의 성능 감소)

  • Lee, Ho;Song, Jinhoon;Kim, Kijoong;Kim, Saehoon;Ahn, Byungki;Lim, Taewon;Park, Kwonpil
    • Korean Chemical Engineering Research
    • /
    • v.48 no.3
    • /
    • pp.311-315
    • /
    • 2010
  • The effects of $SO_2$ on the performance of proton exchange membrane(PEMFC) were investigated by introduction air containing $SO_2$ into cathode inlet of PEMFC. And the recovery of the cell performance by applying clean air, cycle voltammetry(CV) and high voltage holding following exposure contaminated air was studied. The $SO_2$ concentration range used in the experiments was from 20 ppb to 1.3 ppm. The performance degradation and recovery were measured by constant-current discharging, I-V polarization and electrochemical impedance spectroscopy(EIS). The cell voltage gradually decayed with time and decreased by 17 mV after 200 hours of 20 ppb $SO_2$ injection. The cell performance can be recovered partially by clean air flushing, CV and high voltage holding due to desorption of S from Pt catalyst.

Vapor Exposure Effect of a Casting Solution on the Embedding and Radioactive Detection of CAYS in Double-layered Polysulffne Film (방사능탐지용 CAYS 함침 이중구조 폴리설폰막의 형상 및 특성에 제막공정의 습도가 미치는 영향)

  • Han Myeong-Jin;Nam Suk-Tae;Lee Kune-Woo;Seo Bum-Kyoung
    • Membrane Journal
    • /
    • v.15 no.3
    • /
    • pp.198-205
    • /
    • 2005
  • Double-layered polymer films to assay the radioactive contamination were formulated using polysulfone (PSF) and cerium activated yttrium silicate (CAYS), consisting of a dense support layer and a CAYS-holding top layer prepared via the diffusion-induced phase inversion. As the vapor exposure process was omitted, the CAYS-holding layer showed a typical asymmetric structure, with CAYS being transfixed into the polymer network spread with large macropores. With the increase in vapor exposure time before immersion, morphology of the films transformed from asymmetric to sponge-like structures, with CAYS being localized in cellular structure. The border structure between the two layers reflects the phase inversion behavior of a cast solution during the coagulation. In the radioactive detection, the polymer phase in a film holding a sponge-like structure is so dense that the radionuclides, deposited on the film, could not filter through the phase, consequently resulting in the loss in the detection efficiency of the film.