• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3252-3259
• /
• 2023

The influence of hold-down spring (HDS) on the vibration characteristics of core barrel is studied in this paper. First, the vibration characteristics experiment of core barrel was carried out with four type of different hold-down spring. These hold-down springs represent the same hold-down force under different spring stiffness and different hold-down force under the same spring stiffness. And then a new finite element method for researching the influence of hold-down spring on the vibration characteristics of core barrel was presented. This new method could consider the influence of the hold-down force and the spring stiffness at the same time. The results suggest that, the hold-down force and friction have greater influence on the vibration characteristics of core barrel than the spring stiffness, and the influence is nonlinear. The influence of the boundary condition on beam mode is greater than that on shell mode for core barrel.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.674-679
• /
• 1995

The hold-down spring forces of Kori nuclear fuels were measured for seven fuel assemblies having 1 to 4 cycles of irradiation histories in the Kori Unit-1 and -2 reactor. The fuel assemblies examined had burnup from 17 to 38 GWD/MTU and the examination was conducted in KAERI PIEF spent fuel storage pool with the newly developed underwater hold-down suing force measuring device. The measurement was made within the elastic deformation ranges and the trends of hold-down spring force relaxation behavour were examined.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제16권3호
• /
• pp.181-192
• /
• 2012

Here in this paper, the steady paint film flow on a vertical wall of a non-Newtonian pseudo plastic fluid for drainage problem has been investigated. The exact solution of the nonlinear problem is obtained for the velocity profile. Also the average velocity, volume flux, shear stress on the wall, force to hold the wall in position and normal stress difference have been derived. We retrieve Newtonian case, when material constant ${\mu}_1$ and relaxation time ${\lambda}_1$ equal zero. The results for co-rotational Maxwell fluid is also obtained by taking material constant ${\mu}_1$ = 0. The effect of the zero shear viscosity ${\eta}_0$, the material constant ${\mu}_1$, the relaxation time ${\lambda}_1$ and gravitational force on the velocity profile for drainage problem are discussed and plotted.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.376-384
• /
• 2023

In this paper, we introduce an upper extremity rehabilitation robot, NREH (NRC End-effector based Rehabilitation arm at Home). Through NREH, stroke survivors could continuously exercise their upper extremities at home. NREH allows a user to hold the handle of the end-effector of the robot arm. NREH is a end-effector-based robot that moves the arm on a two-dimensional plane, but the tilt angle can be adjusted to mimic a movement similar to that in a three-dimensional space. Depending on the tilting angle, it is possible to perform customized exercises that can adjust the difficulty for each user. The user can sit down facing the robot and perform exercises such as arm reaching. When the user sits 90 degrees sideways, the user can also exercise their arms on a plane parallel to the sagittal plane. NREH was designed to be as simple as possible considering its use at home. By applying error augmentation, the exercise effect can be increased, and assistance force or resistance force can be applied as needed. Using an encoder on two actuators and a force/torque sensor on the end-effector, NREH can continuously collect and analyze the user's movement data.

• Coupled systems mechanics
• /
• 제1권4호
• /
• pp.311-324
• /
• 2012

Previous investigations have demonstrated that strong earthquakes can cause severe damage or collapse to storage tanks. Theoretical studies by other researchers have shown that allowing the tank to uplift generally reduces the base shear and the base moment. This paper provides the necessary experimental confirmation of some of the numerical finding by other researchers. This paper reports on a series of experiments of a model tank containing water using a shake table. A comparison of the seismic behaviour of a fixed base system (tank with anchorage) and a system free to uplift (tank without anchorage) is considered. The six ground motions are scaled to the design spectrum provided by New Zealand Standard 1170.5 (2004) and a range of aspect ratios (height/radius) is considered. Measurements were made of the impulsive acceleration, the horizontal displacement of the top of the tank and uplift of the base plate. A preliminary comparison between the experimental results and the recommendations provided by the liquid storage tank design recommendations of the New Zealand Society for Earthquake Engineering is included. The measurement of anchorage forces required to avoid uplift under varying conditions will be discussed.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.98-104
• /
• 2006

In this paper, for the purpose of investigation the acoustic emission(AE) behaviors during resistance spot welding process and tension test of spec steels. As the results present the resistance spot welding method that can get suitable welding qualities or structural integrity estimating method. The resistance spot welding process consists of several stages: set-down of the electrodes; squeeze; current flow; forging; hold time; and lift-off. Various types of AE signals are produced during each of these stages. For tensile-shear test and cross tensile test in resistance spot welded specimens, fracture pa 야 ems are produced: tear fracture; shear fracture; and plug fracture. Tensile-shear specimens strength appeared higher than cross tensile specimens one. In case of tensile-shear specimen happened tear fracture that crack happens in most lower plate. Also, in case of cross tensile specimens, upper plate and lower plate are detached perfect fracture was exposed increases a little as acting force is lower than ordinary welding condition. Therefore, the structure which is combined by resistance spot welding confirmed that welding design must attain so that shear stress may can interact mainly.

• 한국운동역학회지
• /
• 제25권1호
• /
• pp.65-76
• /
• 2015

Objective : The purpose of this study was to analyse the differences in core stability and muscle balance of the pilates Teaser motion according to the surfaces and skills. Methods : There were 10 subjects in this study with 5 being skilled and 5 that were not skilled. The independent variables were surfaces (high elastic & aluminum) and skills (skilled & unskilled). Dependent variables were core stability and muscle balance. Core stability was measured by Force Platform (9872, Switzerland), 3D Imagery (IBS-2000, EXYMA) was used to understand the muscle balance. In order to do the Teaser movement subjects had to lay flat on their back and then lean forward as much as possible and hold the position for 10 seconds. Afterwards, they would lay back down again. A camera (MHS-PM5K, SONY) was used to make 4 phases (take off, recoil forward, holding, recoil backward) during the teaser exercise to analyze movement. In this study quantitative and qualitative analysis was used. For the statistical analysis, 2X2 ANOVA was used to analyze the differences in movement time, X,Y,Z maximum force, center of pressure and angles according to different phases. 2X3 ANOVA was used to analyze the differences in muscle balance via SPSS 18.0. Results : Soft. Elastic mat had a longer holding time, lower Fx/ Fy/ Fz, shorter Fx trajectory, larger angle and shorter gaps in muscle balance than a hard surface in skilled subjects. This was because the mat can help to recruit and then sustain core fine muscles during holding time in the Teaser movement.

• Strategy21
• /
• 통권46호
• /
• pp.159-204
• /
• 2020

광복 이후 한반도가 남북으로 분단되면서 대한민국은 필연적으로 유사 해양국가가 되었다. 더불어 대한민국은 북한뿐만 아니라 중국과 러시아와 같은 강대국들에 둘러싸여 있는 지정학적 위치에 놓여 있다. 한편, 근래 들어 중국이 해군 항공 전력을 상당히 증강시키는 방향에 있기 때문에 우리 해군 또한 이에 대응할 수 있는 방안을 모색해야 한다. 이러한 이유로 인해 우리는 미국과의 끈끈한 동맹을 유지하고 있으나, 그 외의 국가들과는 불확실한 관계에 놓여있는 것이 현실이다. 따라서 현재 대한민국과 유사한 지정학적 위치에 있던 과거의 서독이 설정한 전력 확충의 방향성, 냉전기 당시 NATO 조직 내에서 담당하던 '지역해군'으로서의 역할, 그리고 주변국들과의 안보협력 구상방식은 대한민국에게 있어 의미 있는 참고사례가 될 수 있을 것이다.

• 한국운동역학회지
• /
• 제19권1호
• /
• pp.37-47
• /
• 2009

본 연구는 체조 철봉종목의 국가대표선수 2명을 대상으로 고난도 공중 비행 기술인 콜만 동작의 완성도를 높이기 위한 기술훈련 프로그램을 개발하여 8주간 적용하고 향상도를 3차원 영상분석을 통해 제시함으로써 경기력 향상에 도움을 주고자 하였다. 훈련 프로그램은 휘돌기 손 놓기, twist, 봉잡기로 구성하여 실시하였으며, 그 결과 다음과 같은 결론을 얻었다. 동작이 처음 시작되는 크게 휘돌기의 물구나무 경과 시 신체를 지면과 수직에 가깝도록 치켜세운 다음 수직하강에 가깝게 신체를 다운시켜서 깊은 추기기 운동을 수행케 하고, 고관절과 견관절의 굴신 폭을 크게 하는 추기기보다는 우선적으로 동체 회전을 중시하면서 신체중심을 충분히 끌어 올리는 봉 이탈, 그리고 비행 시 신체 각 관절의 상대각을 작게 하도록 주문하여 연습케 하였다. 그 결과 철봉의 탄성을 크게 유발하구 신체의 후방 진행속도를 증가시켜서 휘돌기의 구심력을 증가시키면서 높은 위치에서 봉을 이탈하였으며, 비행 시 신체를 빠르게 지면과 수직이 되도록 세울 수 있게 되어 여유로운 공중회전과 비틀기 운동을 수행할 수 있었다. 또한 상승할 때 손 놓는 타이밍을 맞추는데 특별히 신경 쓰지 않더라도 비행방향의 조절을 용이하게 할 수 있어서 봉잡기 시 철봉과 적정한 거리를 유지함과 동시에 충분한 동체의 회전과 비틀기 거리를 확보할 수 있었다.