• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.437-446
• /
• 2005

Recently as people's values are changing from development phase into running stage after quality of life, so that the needs of environmentally friendly construction are gradually increasing. Also populace discontent about the pollution during construction process such as the noise and vibration caused by construction machinery is increasing. Even though it is impossible to eliminate the construction pollution fully, it is necessary to make efforts to reduce construction pollution to a minimum. In terms of construction site operating, the first possible step for solving these matters directly is that the necessary sum of expenses must be secured as the environmental management costs in the conceptual phase. However, in fact, the environmental management costs have not been secured in the budget. Generally it is the major reason not arising proper activities to prevent the pollution in the construction site. The purpose of this research is to suggest the efficient budgeting method regarding Environmental management costs to ensure the necessary sum of environmental management expenses. To provide an efficient budgeting method, interviews with the person in charge of environment management was conducted. 78 construction sites was surveyed and environmental management costs were analyzed through their historical data from the survey. According to the results of analysis, the ratio of environmental management costs is revealed 0.45% of construction cost as average comparing 0.2% of legal limit. And usually the environmental management cost was appropriated into the safety management budget. So it is needed to isolate environmental management budget securely and modify the ratio of Environmental conservation Costs in Construction Technology Management Act.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 가을 학술발표회 논문집
• /
• pp.65-94
• /
• 2001

The use of PBD(prefabricated band drain)far ground improvement is rapidly increased due to the merit of construction period and cost, environmental preservation compared with other vertical drain method, and the development of material. This paper presents the historical review, theoretical background, design procedure and method, and typical construction example for the PBD. Also, the direction of further technical development and study is recommended.

• 한국건축시공학회지
• /
• 제14권5호
• /
• pp.415-422
• /
• 2014

본 연구는 공공건축물의 실적공사비 분석을 통해 총공사비에 대한 적정보정율을 기초자료로 제시하고자 한다. 이에 대해 조달청에서 발주한 2009~2011년에 준공된 53개 프로젝트를 연구 대상으로 하였다. 공사비 분석은 주요 공정인 건축, 기계, 전기, 통신, 부대시설에 대하여 빈도론적 관점에서 중위수를 활용한 절대오차율을 기반으로 총공사비에 대해 비교 분석하였다. 이를 통해 적합회귀모형을 선정하고 보정율을 책정하였다.

• 한국건설관리학회논문집
• /
• 제7권6호
• /
• pp.175-184
• /
• 2006

사회기반시설의 노후화에 따라 시설물 유지관리에 관한 관심이 증대되고 있으며, 이에 따라 다양한 사회기반시설에 대한 LCC분석 연구가 수행되고 있다. 특히 기계설비가 다수 포함된 기반시설에서는 시설물의 건설비와 더불어 보수/교체비, 에너지비 등 유지관리비용이 높은 비중을 차지하고 있다. 이에 본 연구에서는 하수처리장의 슬러지 수집기 선정에 있어 정량적 요소와 정성적 요소를 모두 고려하는 LCC 분석 모델을 개발하고, 사례적용을 통하여 최적대안을 선정하고자 한다. 문헌고찰과 분석대상 하수처리장의 슬러지 수집기에 대한 공사비와 유지관리 및 보수/교체 이력자료를 바탕으로 비용항목을 도출한다. LCC분석을 위한 가정사항 설정 후, 각 항목별 실적자료와 장비납품업체의 정보를 활용하여 경제성 평가결과를 도출하고, 할인율과 초기투자비 및 유지관리비의 비용변동범위에 따른 민감도분석을 실시한다. 설계자, 자재공급업체 및 시공전문가의 면담을 통하여 유지관리 편의성, 조달 용이성, 슬러지 수집 성능, 침전물제거 효율도, 환경친화성 등 슬러지 수집기 선정을 위한 기술적 사회적 영향인자를 파악한다. 분석된 기술적 사회적 요인과 LCC 분석결과인 경제성에 대하여 각 항목별 쌍별비교를 통하여 항목별 가중치를 설정하고 전문가 평가를 통하여 종합적인 최적안을 선정한다.

• 한국건설관리학회논문집
• /
• 제11권6호
• /
• pp.35-44
• /
• 2010

효율적인 교량의 유지관리를 위해서는 우선순위를 고려한 유지보수비용 예측과 전략적인 예산배분이 가능한 자산관리시스템의 구축이 필요하다. 본 연구는 이를 돕기 위한 교량의 자산가치 평가방법 연구를 통해 국내 실정에 적합한 실효성 있는 자산가치 평가방법의 제안을 주목적으로 하였다. 우선 국내외 교량시설물의 자산가치 평가 적용사례를 조사하여 그 장단점을 파악하고 국내 실정에 적합한 교량자산가치 평가 방법을 고찰하였다. 이를 바탕으로 취득원가에 의한 자산가치 평가방법과 대체원가를 활용한 가치평가 방법을 제안하고 교량의 가치평가를 위한 모델을 정립하였다. 또한 제안된 두 가지 자산가치 평가방법을 활용하여 국내에서 공용중인 교량의 가치평가를 수행하였다. 회계적 목적의 자산가치 평가 지원을 위해서는 초기건설비용에 근거한 취득원가를 고려한 자산가치 평가방법이 바람직한 것으로 분석되었으며, 유지관리 의사결정의 목적을 위해서는 보다 다양한 의사결정 인자의 고려가 가능한 감가상각 후 대체원가방법을 활용하는 것이 적합한 것으로 분석되었다.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.458-464
• /
• 2008

The structural health monitoring has been gaining more importance in civil engineering areas such as earthquake and wind engineering. The use of health monitoring system can also provide tools for the validation of structural analytical model. However, only few structures such as historical buildings and some important long bridges have been instrumented with structural monitoring system due to high cost of installation, long and complicated installation of system wires. In this paper, the structural monitoring system based on cheap and wireless monitoring system is investigated. The use of advanced technology of micro-electro-mechanical system(MEMS) and wireless communication can reduce system cost and simplify the installation. Further the application of wireless MEMS system can provide enhanced system functionality and due to low noise densities. Identification results are compared to ones using data measured from traditional accelerometers and results indicate that the system identification using wireless MEMS system estimates system parameters accurately.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.328-333
• /
• 2007

Traditional maintenance planning is based on a constant maintenance interval for equipment life. In order to consider economic aspect for tm based preventive maintenance, preventive maintenance is desirable to be scheduled by RCM(Reliability-Centered Maintenance) evaluation. The main objective of RCM is to reduce the maintenance cost, by focusing on the most important functions of the system and avoiding or removing maintenance actions that are not strictly necessary. So, Markov state model is utilized considering stochastic state in RCM In this paper, a Markov state model much can be used for scheduling and optimization of maintenance is presented. The deterioration process of system condition is modeled by the stepwise Markov model in detail. Also, because the system is not continuously monitored, the inspection is considered. In case study, simulation results about RCM will be shown using the real historical data of combustion turbine generating unit in Korean power systems.

• 디지털산업정보학회논문지
• /
• 제11권4호
• /
• pp.177-187
• /
• 2015

Although actual business environment is getting difficult and hard, IT companies tend to shy away from of annual investment. Many firms have already reached the 25 percent level. However, the profit and the result of their annual investment needs to be evaluated objectively. IT investment analysis usually proceeds by comparing benefits and costs of an IT investment. Much of the problem derives from the historical treatment of IT as an overhead expense rather than a capital asset. What is most worrying about the current situation is the pressure to take a very short-term view of IT. Therefore, this research aims to analyses and justify the necessity of Visionary IT Investment. For this, it is crucial to identify the factors, which affect positively Visionary IT Investment and understand the role of CIO and explain the result of Visionary IT Investment, which is differed to related business and by different business environment. As a result of this study, the legitimacy of IT Investment is proved through analyzing the business value of not investing and cost-avoidance strategies.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.11-18
• /
• 1999

Major factors that are considered to determine lease charges of container terminals are, among others, construction cost of berth, discount rate, financing cost, and size of annual equivalent recovery. This paper aims to calculate construction costs at PECT and GCT and their annual equivalent recovery on the basis of historical data, and to identify whether or not relationship of the above result and current lease charges at the two terminals are justifiable.

• 무역학회지
• /
• 제46권5호
• /
• pp.83-98
• /
• 2021

This study aims to examine the effects of international trade in intermediate input on the implications of international business cycle properties in Korea. To do this, I have extended standard one goods New Keynesian international business cycle model to incorporate the role of intermediate inputs. After constructing the DSGE model, I have analysed the impulse response function and varian decomposition results. The results show that the model could introduce a new channel, that is, "cost channel" like Eyquem and Kamber (2014). In other words, the model has changed the dynamics of aggregate inflation by the cost channel. When the trade in intermediate goods increase, which is measured by openness of foreign input, the volatility of output, consumption and inflation increase two or three times. However, the model itself fails to explain the full account of cycle behavior of historical data, but the results imply that the trade in intermediate input assumption can help to improve the forecasting ability of international business cycle models.