• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2010

The purpose of this study was to analyze the kinematic factors and throwing variables for the 3-turn and 4-turn techniques and for release as well as to provide technical advice for improving athletic performance in hammer throwing. Data analysis led to the following conclusions: To increase the rotation speed for the 3-turn and 4-turn techniques, the time elapsed during the 1-foot support period should be decreased the distance between the rotating foot and the rotation axis should be small and the height of the hip joint should be increased at the times of release The throwing angle at the moment of release should be more than 40 degrees, and the throwing position should be taken vertically high at the shoulder joints. To accelerate the motion of the hammer, the speed should not be reduced during the 1-foot support period but should be increased during the 2-foot support period for much greater acceleration. In the 3-turn technique, the angles of the shoulder axis and hummer string should be dragged angle at the maximum point and lead angle at the minimum point, and dragged angle at the maximum and minimum points in the 4-turn at the time of relase The upper body should be quickly bent backward, the knee angle should be extended, and the angles of the shoulder axis and hammer string should be dragged angle close to 90 degrees.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3834-3842
• /
• 2011

The purpose of this study is to analyze the kinematic characteristics of children with Down syndrome got congenitally joint laxity and muscle hypotonic. The subjects are boys with Down syndrome and don't have the other disabilities. We got three dimensional position data and then calculated spatiotemporal and kinematic variables during walking on treadmill used increasingly for gait analysis and training. In result, in order to overcome their gait instability due to their musculoskeletal characteristics they walked with hip, knee and ankle joints more flexed than the typical gait pattern, and on the propulsion phase they extend the lower limb joints less than the typical, result in propel the body less than. The reason is that the more is the propulsion by extending the joints, the greater is the reaction force from the ground on heel contact. This result is expected to be used to develop the training program for intensification of musculoskeletal system aim to improve the other musculoskeletal disabilities as well as Down syndrome.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.38-42
• /
• 2014

Objective: In this study, we applied a neurodynamic sciatic nerve sliding technique to healthy adults to elucidate its effects on hamstring flexibility and postural balance. Design: Cross-sectional study. Methods: This study targeted twenty four healthy adults (16 men, 8 women). A neurodynamic sciatic nerve sliding technique was applied 5 times to all subjects' dominant leg. The subjects were asked to sit on the bed while performing cervical and thoracic flexion, as well as knee flexion with ankle plantar flexion. Then, they were asked to perform cervical and thoracic extension and knee extension with their ankle in dorsiflexion and maintain the position for 60 s. For postural balance, we measured postural sway while the subjects maintained a one-legged standing posture using the Good Balance System and measured the hip joint flexion range of motion using a standardized passive straight leg raise (SLR) test. Results: SLR test increased significantly from $79^{\circ}$ before the intervention to $91.67^{\circ}$ after the intervention (p<0.05). Regarding the participants' balance evaluated using the one-legged standing test, the X-speed decreased significantly from 18.61 mm/s to 17.17 mm/s (p<0.05), the Y-speed decreased from 22.28 mm/s to 20.52 mm/s (p<0.05), and the velocity moment was significantly decreased from $89.33mm^2/s$ to $74.99mm^2/s$ after the intervention (p<0.05). Conclusions: Application of the neurodynamic sciatic nerve sliding technique exhibited improved hamstring flexibility and postural balance of healthy adults.

• Physical Therapy Korea
• /
• v.28 no.4
• /
• pp.266-272
• /
• 2021

Background: Considering the kinetic chain of the lower extremity, a pronated foot position (PFP) can affect malalignment of the lower extremity, such as a dynamic knee valgus (DKV). Although the DKV during several single-leg movement tests has been investigated, no studies have compared the differences in DKV during a single-leg step down (SLSD) between subjects with and without PFP. Objects: The purpose of this study was to compare the DKV during SLSD between subjects with and without PFP. Methods: Twelve subjects with PFP (9 men, 3 women) and 15 subjects without PFP (12 men, 3 women) participated in this study. To calculate the DKV, frontal plane projection angle (FPPA), knee-in distance (KID), and hip-out distance (HOD) during SLSD were analyzed by two-dimensional video analysis software (Kinovea). Results: The FPPA was significantly lower in PFP group, compared with control group (166.4° ± 7.5° and 174.5° ± 5.5°, p < 0.05). Also, the KID was significantly greater in PFP group, compared with control group (12.7 ± 3.9 cm and 7.3 ± 2.4 cm, p < 0.05). However, the HOD not significantly differed between two groups (12.7 ± 1.7 cm and 11.4 ± 2.5 cm, p > 0.05). Conclusion: The PFP is associated with lower FPPA and greater KID. When assess the DKV during SLSD, the PFP should be considered as a crucial factor for occurrence of DKV.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.143-154
• /
• 2021

This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.4
• /
• pp.293-299
• /
• 2020

Objective: The aim of this study was to investigate the swing and aerial motion of Kovacs, and evaluate the skill level of Kovacs by Korean adult players on horizontal bar. Method: The subjects for this study were 6 male top athletes participated in the 46th National Gymnastics against Cities and Provinces. After the motions of Kovacs were filmed by digital highspeed camcorder setting in 90 frames/s, kinematical data were calculated through DLT method. The variables were computed in the lapse time, the joint angle, the position·velocity of body COG, the inferred tension force of bar, and body COG path were simulated according to skill level of Kovacs. Results: Firstly, it was revealed that the lapse time was 1.19±0.03 s in the swing phase, and 0.83±0.03 s in the aerial phase. Secondly, it was revealed that the shoulder·hip joint motions of S1 and S2 were better than the other subjects in the swing phase, and the knee joint motions of S1 and S2 were better than the other subjects in the aerial phase. Thirdly, it was revealed that the horizontal·vertical velocity of body COG were -1.40±0.03 m/s, 3.80±0.07 m/s respectively, and the vertical positions of S1 and S2 were higher a little than the other subjects. Lastly, the skill level of Kovacs of this subjects was evaluated into 3 steps; excellent, advanced, normal. They need to train the swing motion including a giant circle, and body motions in the air. Conclusion: It would be suggested that Korean domestic players should improve to increase the vertical velocity at release instant and train to control the limbs elaborately in the air.