• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.33-39
• /
• 2019

In this paper, we propose a parametric model for analyzing the motion information obtained from the acceleration sensors to measure the activity of the human body. The motion of the upper body and the lower body does not occur at the same time, and the motion analysis method using a single motion sensor involves a lot of errors. In this study, the 3-axis accelerometer is attached to the arms and legs, the body's activity data are measured, the momentum of the arms and legs are calculated for each channel, and the linear predictive coefficient is obtained for each channel. The periodicity of the upper body and the lower body is determined by analyzing the correlation between the channels. The linear predictive coefficient and the periodic value are used as data to measure the type of exercise and the amount of exercise. In the proposed method, we measured four types of movements such as walking, stair climbing, slow hill climbing, and fast hill descending. In order to verify the usefulness of the parameters, the recognition results are presented using the linear predictive coefficient and the periodic value for each motion as the neural network input.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.65-79
• /
• 2014

This study selected Nakdong River basin zone in Daegu as an example area to conduct landscapetope classification and aesthetic value assessment of landscape according to the classified landscapetope. The main result of this research can be summed up as following. First, the result of landscapetope type classification showed 28 types of landscapetope including complex residential area (AA), natural stream type with copious vegetation (BA), forest type centered on mixed forest of soft and hardwood (EB) along with 129 types of imputed specific landscapetope. The result of the total first assessment using B-VAT showed the first grade 10 types, II grade 4 types, III grade6 types, IV grade 3 types, 5 types for V grade with the lowest value. The second assessment conducted toward the landscapetope types with the grade higher than the average (including III grade) in the result of the first assessment showed that there are 66 spaces for the sites (1a, 1b) with special meaning for aesthetic landscape evaluation. And also, there were 69 spaces for those (2a, 2b, 2c) with meaning for aesthetic landscape evaluation. The design model of this research is largely divided into improvement goal and specific execution plan. First, the improvement goal is divided into 6 categories including conservation area, complementary area, and restoration area, and the specific execution plan is divided into 14 categories including special landscape management area, general landscape management area, conservation of hill areas with optically good condition. A comprehensive master plan was suggested by directly applying the set landscape planning model to the subject place of this research.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.48-62
• /
• 2018

In this study, landslide of debris flow occurred at 51 sites around Daeryounsan located in between Chuncheon-si and Hongcheon-gun during July in 2013 were investigated in field and behavior characteristics of debris flow were analyzed on the basis of records of rainfall and site investigation. According to debris flow types of channelized and hill slope, location and slope angle of initiation and deposit zone, and width and depth of erosion were investigated along entire runout of debris flow. DEM(Digital Elevation Model) of Daeryounsan was constructed with digital map of 1:5,000 scale. Land slide hazard was estimated using SINMAP(Stability INdex MAPping) and the predicted results were compared with field sites where debris flow occurred. As analyzed results, for hill slope type of debris flow, predicted sites were quite comparable to actual sites. On the other hand, for channelized type of debris flow, debris flow occurrence sites were predicted by using stability index associated with topographic wetness index. As analyzed results of 4 different conditions with the parameter T/R, Hydraulic transmissivity/Effective recharge rate, proposed by NRCS (Natual Resources Conservation Service), predicted results showed more or less different actual sites and the degree of hazard tended to increase with decrease of T/R value.

• International Journal of Human Ecology
• /
• v.4 no.1
• /
• pp.71-86
• /
• 2003

Over the past few decades, changes in patterns of behavior (e.g., diet, smoking, alcohol consumption, and physical activity) have led to major changes in health status, characterized by increases in obesity, Type II diabetes mellitus, cardiovascular disease, and some cancers. This epidemiologic transition is largely the result of rapid increases in immigration to developed countries and rural-urban migration within developing countries, which is usually accompanied by environmental and lifestyle changes. In particular, adoption of “Western” dietary patterns, which tend to be high in fat and low in fruits and vegetables, is of concern since diet is a potent contributor to chronic disease risk. However, until recently, the process by which immigrants and rural-urban migrants adopt the dietary practices predominant in their new environments, known as dietary acculturation, has received very little research attention. Dietary acculturation is multidimensional, dynamic, and complex, and varies considerably depending on a variety of personal, cultural, and environmental characteristics. Therefore, to intervene successfully on the negative aspects of dietary acculturation, it is important to understand the process and identify factors that predispose and enable it to occur. The purpose of this article is to provide a practical model for understanding and investigating the effect of dietary acculturation on food and nutrient intake. Thus, this report 1) gives an overview of acculturation, 2) defines dietary acculturation and presents a model for how it occurs, 3) discusses measurement issues around dietary acculturation,4) reviews the literature on dietary acculturation in Korean Americans; 4) suggests a paradigm for acculturation research; and 5) offers some recommendations for future research in this area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.361-365
• /
• 2000

This study was carried out to evaluate yearly variation and stability of yield and yield components of fifteen rice varieties. Yield stability and universal variety parameter of rice varieties were utilized for statistical model developed by Stroike, Grafius, and Finlay respectively. The lowest yearly variation based on coefficient of variation was found in Dasanbyeo for number of panicles/hill, in Jodongji for number of grains/panicle, in Yongmoonbyeo for ripened grain ratio, in Nagdongbyeo for 1,000 grain weight, and in Dasanbyeo for grain yield. Stability analysis by Stroike and Johnson's model revealed that Ilpumbyeo, Hwaseongbyeo, Dongjinbyeo in Japonica type, and And-abyeo and Dasanbyeo in Tongil type had the higher stability above average. Universal varieties analyzed by Grafius model were Ilpumbyeo, Dongjinbyeo, Hwaseongbyeo, Nagdongbyeo, and Jodongji in Japonica, and Dasanbyeo and Samgangbyeo in Tongil type. Damageum, Dongjinbyeo, Hwaseongbyeo and Ilpumbyeo in Japonica, and Dasanbyeo and Yongmoonbyeo in Tongil type were found to be highly stable as analyzed by Finlay ＆ Wilkinson's model. In conclusion, with reference to both grain yield and stability based on above three methods, Ilpumbyeo, Hwaseongbyeo, and Dongjinbyeo in Japonica, and Dasanbyeo in Tongil type were evaluated to be highly year-stable and high-yielding.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1147-1155
• /
• 2014

Biomechanical models are often used to predict muscle and joint forces in the human body. For estimation of muscle forces, the body and muscle properties have to be known. However, these properties are difficult to measure and differ from person to person. Therefore, it is necessary to predict the change in muscle forces depending on the body and muscle properties. The objective of the present study is to develop a numerical procedure for estimating the muscle forces in the human lower extremity under uncertainty of body and muscle properties during rising motion from a seated position. The human lower extremity is idealized as a multibody system in which eight Hill-type muscle force models are employed. Each model has four degrees of freedom and is constrained in the sagittal plane. The eight muscle forces are determined by minimizing the metabolic energy consumption during the rising motion. Uncertainty analysis is performed using a first-order reliability method. The one-standard-deviation range of agonistic muscle forces is calculated to be about 150-300 N.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1029-1037
• /
• 2009

Recently, the technologies of mobile robots have been growing rapidly in the fields such as cleaning robot, explosive ordnance disposal robot, patrol robot, etc. However, the researches about the autonomous underwater robots have not been done so much, and they still remain at the low level of technology. This paper describes a model of 3-joint (4 links) fish robot type. Then we calculate the dynamic motion equation of this fish robot and use Singular Value Decomposition (SVD) method to reduce the divergence of fish robot's motion when it operates in the underwater environment. And also, we analysis response characteristic of fish robot according to the parameters of input torque function and compare characteristic of fish robot with 3 joint and fish robot with 2 joint. Next, fish robot's maximum velocity is optimized by using the combination of Hill Climbing Algorithm (HCA) and Genetic Algorithm (GA). HCA is used to generate the good initial population for GA and then use GA is used to find the optimal parameters set that give maximum propulsion power in order to make fish robot swim at the fastest velocity.

• Journal of the Korean Geographical Society
• /
• v.40 no.1 s.106
• /
• pp.126-152
• /
• 2005

In recent years, there are some confusions related to the definition and existence of mountain ranges, which have been described in current geography text books. We contend that these confusions came from the lack of understanding on the geomorphological processes that form the mountain system in Korea. This research attempts to clarify the definition of mountain ranges and offer geological and geomorphological explanations about the formation of them. Based on the analyses of the social and cultural causes underlying the recent debates on the existence of mountain ranges, we tried to identify the relationships among the definition of mountain ranges, geological structure of Korea, and the forming processes of mountain ranges. The current and past mountain range maps were compared with geological structures, geological maps, surface curvature, and hill shade maps. The latter two maps were derived from a Digital Elevation Model of the Korean Peninsular. The results show that we are able to prove the existence of most mountain ranges, which provides a useful framework to understand the geological evolution of Korean peninsular and formation of mountainous landscape of Korea. In terms of their morphological continuity and genesis, however, we identified five different categories of mountain ranges: 1) Uplift mountain ranges(Hamkyeong Sanmaek, Nangrim Sanmaek, Taebaek Sanmaek), which were formed by the uplift processes of the Korean Peninsular during the Tertiary; 2) Falut mountain ranges(Macheonryeong Sanmaek, Sobaek Sanmaek, Buksubaek Sanmaek), whirh were directly related to the uplift processes of the Korean Peninsular during the Tertiary; 3) Trust mountain ranges(Jekyouryeong Sanmaek, Kwangju Sanmaek, Charyeong Sanmaek, Noryeong Sanmaek), which were formed by the intrusion of granite and consequent orogenic processes during the Mesozoic era; 4) Drainage divide type mountain ranges, which were formed by the erosion processes after the uplift of Korean Peninsular; 5) Cross-drainage basin type mountain ranges (Kangnam Sanmaek, Eunjin Sanmaek, Myelak sanmaek), which were also formed by the erosion processes, but the mountain ranges cross several drainage basins as connecting mountains laterally We believe that the current social confusions related to the existence of mountain ranges has partly been caused by the vague definition of mountain ranges and the diversity of the forming processes. In order to overcome theses confusions, it is necessary to characterize the types of them according the genesis, the purpose of usages and also the scale of maps which will explains the mountain systems. It is also necessary to provide appropriate educational materials to increase the general public's awareness and understanding of geomorphological processes.