• Wind and Structures
• /
• v.32 no.2
• /
• pp.115-126
• /
• 2021

The snow cornice mass on the formation zone had triggered avalanches which led to the loss of human life and property. Snow cornice is formed due to flow separation on the leeward side. Effect of lee slope is more prominent in the formation of snow cornices as compared to the windward slope. The analysis of wind flow pattern has been carried out to evaluate the performance of a jet roof. Computational Fluid Dynamics (CFD) analysis of wind flow over a 2D hill model was carried out using RNG based k-∈ turbulence models available in ANSYS Fluent. Effect of varying leeward hill slope (1:2 to 1:6) on flow separation for the given windward slope was observed and a critical slope of 1:4 was found at which the separation zone ceased to exist. The modification of wind flow over a hill due to the installation of jet roof was simulated. It was observed that jet roof had significantly modified the wind flow pattern around hill ridgeline and ultimately snow cornice formation had mitigated. The results of the wind flow pattern were validated with the wind data collected at the experimental site, Banihal Top (Jammu and Kashmir, India). The wind flow simulation over the hill and mitigation of cornice formation by the jet roof has been explained in the present paper.

• Wind and Structures
• /
• v.36 no.2
• /
• pp.75-90
• /
• 2023

Turbulent wind flow over hilly terrains has been extensively investigated in the scientific literature and main findings have been included in technical standards. In particular, turbulent wind flow over nominally two-dimensional hills is often adopted as a benchmark to investigate wind turbine siting, estimate wind loading, and dispersion of particles transported by the wind, such as atmospheric pollutants, wind-driven rain, windblown snow. Windblown sand transport affects human-built structures and natural ecosystems in sandy desert and coastal regions, such as transport infrastructures and coastal sand dunes. Windblown sand transport taking place around any kind of obstacle is rarely in equilibrium conditions. As a result, the modelling of windblown sand transport over complex orographies is fundamental, even if seldomly investigated. In this study, the authors present a wind-sand tunnel test campaign carried out on a nominally two-dimensional sinusoidal hill. A first test is carried out on a flat sand fetch without any obstacle to assess sand transport in open field conditions. Then, a second test is carried out on the hill model to assess the sand flux overcoming the hill and the morphodynamic evolution of the sand sedimenting over its upwind slope. Finally, obtained results are condensed into a dimensionless parameter describing its sedimentation capability and compared with values resulting from other nominally two-dimensional obstacles from the literature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.956-959
• /
• 2001

Three perennial grasses, Napier (Pennisetum purpureum), Andropogan (Andropogan gayanus) and Para (Brachiria mutica), were grown at different hill heights dividing the hill slope into three regions (top, middle and bottom). The first two grasses gave the highest biomass yields (29.9 and 37.6 tonnes/ha/harvest, respectively) followed by Para (20.5 t/ha). No significant (p>0.05) changes in biomass yields of the grasses were found due to differences in hill heights. The grasses were harvested three times in the first year of cultivation. Maize and cowpea as sole crops or their intercrops were cultivated in the plain land and the intercrop gave the highest biomass yield (46.7 t/ha, p<0.05). The biomass produced was successfully ensiled in the underground pits at the hill tops.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.55-64
• /
• 2002

This study aims at the suggestion of possibility that a housing density will maintain properly and that an ecological hill housing will recover a rapport with the ground. That is, both residential planning on the hillside and ecological architecture as a concept for development are chosen for study category, and relationship between the hillside and the hill housing is theorized and then propriety is analysed through application of the ecological planning elements. The results of this study are as follows: 1. Now that the hillside is regarded as an idle land that preserves natural environment and maintains ecosystem, it must be developed on the basis of awareness that nature and human beings exist together. 2. Analysis of geographical factors must be advanced because it is inevitable that the development of the hill housing should be performed properly to the geographical characteristics. 3. Planning elements of ecological residential block which are possible for constructing on the hillside can be developed and applied, on the basis of geographical characteristics, by classifying them into two areas; housing estate, building and unit.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.789-796
• /
• 2012

To find the module sequence that makes correction rate optimal is the goal of this paper. The Hill-climbing algorithm was used in the experiment to analyze the performance of Korean Spelling Corrector. Given the wrong eojul set, We found the module sequence that shows correction rate of 96.41%. Because of the quite high correction rate, Hill-climbing is a practical method for our Spelling Corrector.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.275-280
• /
• 2004

Shape optimization was performed to obtain the precise shape of cutouts including the internal shape of cutouts in laminated composite plates by three dimensional modeling using solid element. The volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. The volume control of the growth-strain method makes Tsai-Hill failure index at each element uniform in laminated composites under the initial volume. Then shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study. (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsal-Hill failure index was reduced up to 67% when shape optimization was peformed under the initial volume by volume control of growth-strain method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1337-1343
• /
• 2004

Shape optimization was performed to obtain a precise shape of cutouts including the internal shape of cutouts in a laminated composite plate by three dimensional modeling using solid element. Volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. It makes Tsai-Hill failure index at each element uniform in laminated composites under the predetermined volume a designer requires. Shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study; (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure indices of the optimal shapes were remarkably reduced comparing with those of the initial shapes.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.122-130
• /
• 2009

The analysis of human movement requires the knowledge of the Hill type muscle parameters, the muscle-tendon and moment arm length change as a function of joint angles. However, values of a subject's muscle parameters are very difficult to identify. It turns out from a sensitivity analysis that the tendon slack length and maximum muscle force are the two critical parameters among the Hill-type muscle model. Therefore, it could be claimed that the variation of the tendon slack length and maximum muscle force from the Delp's reference data will change the muscle characteristics of a subject remarkably. A numeric optimization method to search these tendon parameters specific to a subject is proposed, and the accuracy of the developed algorithm is evaluated through a numerical simulation.

• Korean Journal of Remote Sensing
• /
• v.1 no.1
• /
• pp.89-97
• /
• 1985

An algorithm for the Hill-Sliding Clustering (HSC) method was developed using the BASIC language for Apple II personal computer. It was designed for initialization of clusters from multivariate multimodal Gaussian data. Landsat multispectral imagery data of a Korean coastal area were used for its performance test. The test showed encouraging results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.1
• /
• pp.87-91
• /
• 1980

The competitiveness of 7 soybean (Glycine max (L) Men.) cultivars to weeds were studied. The two soybean cultivars that showed the greatest competitiveness to weeds by maintaining their yields were Suweon 83 and Dongbuktae; whereas the least competive were Columbus and Harosoy.