• 화약ㆍ발파
• /
• 제32권2호
• /
• pp.16-24
• /
• 2014

본 시공사례는 "중앙선 원주~제천 복선 전철 제 ${\bigcirc}$공구 노반 건설공사" 중 고속도로 하부통과 구간으로서 터널 노선 상부 13m에 운행 중인 고속도로가 있다. 고속도로에 영향을 최소화하기 위하여 무진동 암파쇄 굴착공법이 적용되었으나, 기계식 굴착작업 특성상 굴착 자체에 많은 시간이 소요되어 신속한 터널 폐합이 이루어지지 못해 굴착 중 주변 암반의 변위 증가에 따른 상부 침하가 우려되어 대안공법의 필요성이 요구되었다. 따라서 고속도로의 진동허용기준인 1.0cm/sec 이하로 제어하면서, 터널의 신속한 굴착과 폐합을 통해 지반의 변위를 최소화하여 상부 고속도로의 침하 현상을 방지할 수 있는 전자발파공법(eDevII)이 검토되었다. 사전 굴착영향검토를 시행한 결과, 전자발파를 통해 상부 고속도로의 안정적인 관리가 가능한 것으로 검토되었으며, 이를 기초로한 시공 결과 안전하고, 신속하게 굴착을 완료하였다.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.89-102
• /
• 2007

Generally, it is well known that driving in tunnel imposes large burden to driver because of spatial constraint, limited visual field and so on. And such a burden of driver result in high accident occurrence. In this reason, studies dealing with features of driving and traffic flow in tunnel have been performed. However, information about characteristics of drivers and traffic in a very long tunnel is not accumulated yet. The purpose of this study is to identify the relations between tunnel length and burden of driver, driving patterns, traffic flow characteristics using the tunnel simulator that realizing various tunnel situations. For this, the tunnel simulation program was developed along 11km-length section. And biological data of 10 subjects gained from driving condition in simulation program was analyzed and compared with the result of real driving condition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권4호통권56호
• /
• pp.107-115
• /
• 2009

70~80년대에 다수의 고속도로 건설과 함께 축적된 고속도로 터널에 대한 설계 및 시공기술에 비하여 철도터널의 설계는 최근들어 활발하게 이루어지고 있는 상황이다. 따라서 고속도로 터널과 철도 터널의 비교시에는 다소간의 시간적인 차이가 있는 것이 사실이다. 본 논문에서는 서로 비슷한 굴착단면적을 갖고 있으나 단면형상에서 차이를 나타내는 고속도로 2차로 자연환기터널과 선로중심간격 4.3m의 복선철도 터널에 대해 동일한 조건하에서 지보재를 설치하지 않은 경우와 지보재를 설치한 경우에 대해 수치해석을 수행하여 단면형상 차이에 따른 터널 주변암반에 발생하는 주응력크기 및 축차응력 비교를 통한 터널의 안정성을 비교 분석하였다.

• Wind and Structures
• /
• 제35권4호
• /
• pp.229-242
• /
• 2022

Wind tunnel test is often adopted to assess the site-specific wind characteristics for the design of bridges as suggested by current design standards. To investigate the wind characteristics of flat and mountainous terrain, two topographic models are tested in a boundary layer wind tunnel. The wind characteristics, including the vertical and horizontal mean wind speed distributions, the turbulence intensity, and the wind power spectra, are presented. They are investigated intensively in present study with the discussions on the effect of wind direction and the effect of topography. It is indicated that for flat terrain, the wind direction has negligible effect on the wind characteristics, however, the assumption of a homogenous wind field for the mountainous terrain is not applicable. Further, the non-homogeneous wind field can be defined based on a proposed approach if the wind tunnel test or on-site measurement is performed. The calculated turbulence intensities and wind power spectra by using the measured wind speeds are also given. It is shown that for the mountainous terrain, engineers should take into account the variability of the wind characteristics for design considerations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.745-750
• /
• 2005

The demand of tunnels has been increased for the linear improvement of general national highway, and road construction and/or enlargement in Korea. Also, the collapses of tunnel portal slope have been increased in recent due to heavy rain caused by global warming. Therefore, it has been risen the requirement of system for the stability of tunnel portal slope in Korea as well as all over the world. The objective of this research is to develop an effective maintenance system for supervising the tunnel portal slope. This paper is a basic proposal to execute a survey on the current status and state of the tunnel portal slopes that were already installed along general national highways.

• Computers and Concrete
• /
• 제11권1호
• /
• pp.51-61
• /
• 2013

This paper describes earthquake response of the Arhavi Highway Tunnel its geometrical properties, 3D finite element model and the linear time history analyses under a huge ground motion considering soil-structure interaction. The Arhavi Highway Tunnel is one of the tallest tunnels constructed in the Black Sea region of Turkey as part of the Coast Road Project. The tunnel has two tubes and each of them is about 1000 m tall. In the study, lineartime history analyses of the tunnel are performed applying north-south, east-west and up accelerations components of 1992 Erzincan, Turkey ground motion. In the time history analyses, Rayleigh damping coefficients are calculated using main natural frequency obtained from modal analysis. Element matrices are computed using the Gauss numerical integration technique. The Newmark method is used in the solution of the equation of motion. Because of needed too much memory for the analyses, the first 10 second of the ground motions, which is the most effective duration, is taken into account in calculations. The results obtained 3D finite element model are presented. In addition, the displacement and stress results are observed to be allowable level of the concrete material during the earthquakes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.930-937
• /
• 2004

In tunnel blasting, rock damage and overbreak at excavation limits are strongly related to stability of the tunnel and cost for rock support, and also affect to maintenance after tunnel construction. In this study, many field tests and measurements have been carried out in highway tunnels so that discordance between blast design and practical production blasting could be settled and actual methods of over break control could be proposed through the understanding of the problems in existing blasting patterns. Test blasting in tunnel was carried out many times in two tunnel sites. Also, long hole blasting longer than existing blasting pattern was executed for good grade of rock mass whose RMR value is more than 60. Using the results of test blasting, new standard blasting patterns for two lane tunnel were proposed. As a result of profile measurement after blasting, drilling is a major factor of overbreak. And then the methods for minimizing overbreak were adapted in new blasting patterns.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.139-145
• /
• 2017

PURPOSES : This study analyzed the difference in a driver's workload between using a driving simulator and field driving in tunnel, highway. METHODS : Based on the literature review, it was found that a driver's workload could be quantified using biosignals. This study analyzed the biosignal data of 30 participants using data collected while they were using a driving simulator and during a field test involving tunnel driving. Relative energy parameter was used for biosignal analysis. RESULTS : The driver's workload was different between the driving simulator and field driving in tunnels, highway. Compared with the driving simulator test, the driver's workload exhibited high value in field driving. This result was significant at the 0.05 level. The same result was observed before the tunnel entrance section and 200 m after the entrance section. CONCLUSIONS : This study demonstrates the driving simulator effect that drivers feel safer and more comfortable using a driving simulator than during a field test. Future studies should be designed considering the result of this study, age, type of simulator, study site and so on.

• Journal of Korean Society for Atmospheric Environment
• /
• 제9권E호
• /
• pp.397-400
• /
• 1993

The possible air pollution problems in a proposed underground highway are discussed using carbon monoxide (CO) as an indicator. Carbon monoxide concentrations in the underground highway depend on several factors, including the size of tunnel, the number of automobiles, the CO emission rate, and the tunnel ventilation rate. Using the estimated values, CO concentrations in the underground highway can be predicted. Without proper ventilation system, CO concentration in the underground highway can be dangerous level. However, the cost of operating the mandatory mechanical ventilation system may be tremendouslyy high and may be technically unrealistic to implement. If the underground highway is constructed with proper ventilation system, a continuous air pollution monitoring system with alarming function must be installed to alert personnel of serious air pollution built up in the underground highway. Traffic must be restricted, whenever the inside air pollution levels exceed agreed values. Short distances between evacuation exits are necessary for emergency situations or malfunction of ventilation system.

• 지질공학
• /
• 제17권1호
• /
• pp.115-123
• /
• 2007

최근 들어 인구증가와 경제발전에 따른 고속도로의 확장 또는 신설이 급증하고 있고 양호한 노선을 위해 터널 건설도 급속도로 증가하고 있다. 이와 더불어 터널 시공 중 붕괴가 발생할 수 있는 경우도 상대적으로 높아지고 있다. 특히, 도로의 양호한 선형 확보를 위하여 지반조건이 불량한 구간에서 터널 굴착이 증가하므로 적절한 보강공법의 적용 없이 굴착을 실시하는 경우에 붕락이 자주 발생하였다. 본 논문에서는 고속도로 터널 시공 중 보편적인 붕괴 사례를 조사함으로써 다른 지질조건에서의 붕괴원인과 형태 및 적용 보강공법에 대해 분석하고자 한다.