• The Korean Journal of Mycology
• /
• v.20 no.3
• /
• pp.269-272
• /
• 1992

208 yeast strains were isolated from air at El-Minia city, Egypt. Using 22 morphologi cal and physiological merkmals, these strains were identified and assignned to eight species belonging to seven genera. Rhodotorula mucilaginosa and Cryptococcus albidus were the most dominant species followed by Debaryomyces hansenii. These yeast species occurred regularly, whereas other species appeared sporadically. Rh. rubra, Saccharomyces kluyveri and Rh. aurantiaca were also isolated from the sampled air. The results of this study showed that time, hight and area of air sampling affect composition and total counts of yeast microflora in the air.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.101-106
• /
• 2002

Requirements to fabrication processes for arc welding of highly loaded thick-walled joint and problems of research and development in term s of the tendency for the modern aircraft structure development are outlined. A justified, choice of the development line of the new promising welding processes for solution of these problems is presented. A complex of new welding processes and technologies for making highly reliable joints with different thickness (up to 120 mm and more) and length of weld (up to 0.1 m; 0.1-0.5 m and more than 0.5 m) has bee developed. It is shown that the possibility to control the heat flow distribution over the groove surface of the welded joints provides for improved reliability. The new welding processes are equipment are effectively used in serial production of the Mykoyan md Sukhoi supersonic aircrafts as well as in AN-124 Ruslan and AN-225 Mriya wide body aircrafts.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.90-94
• /
• 1997

Many workers like welders are working in squat sitting postures with te object on the ground for an entire work shift. It is suspected that such prolonged squat sitting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to quantitatively evaluate the physical stress caused by the prolonged squat sitting and to recommend a safe work/rest schedule for the task with squat sitting posture based on the lab experiment. In this study, 8 healthy student subjects participated in the experiment. They maintained a squat sitting posture for 16 minutes with 4 different stool height conditions: no stool, 10cm hight, 15cm height, 20cm height. Every 2 minutes, the discomfort was subjectively assessed using the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort rating, we found that 10cm height stool relieved the workload most. Discomfort rating results also indicated that 20cm height stool showed the heghest workload, and that there was no difference in workload between 15cm height and no stool. We recommend to provide the workers with 10cm height stool for prolonged squat sitting tasks.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.157-159
• /
• 1998

Sapphire crystals were grown by Horizontal Bridgman method. The effects of sliding rate (growth rate) of Molybdenum container, growth atmosphere, temperature gradient and orientation of see on crystal qualities were investigated. The size of the crystals grown was up to 150-200 mm in length, 90 mm in width and 25-35 mm in thickness. Crystals grown under the optimum conditions were colorless, transparent and could not be observed and macroscopic defects, such as bubbles, cracks, twins and mosaic structure. With the grown crystals, prototypes of sapphire substrate for blue wafers were characterized. As a result, we can get hight quality of sapphire wafers with c-axis, 1.5 inches in diameters and 0.33 mm in thickess.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1013-1017
• /
• 1997

This study is on the precision of the optical scanner which is suitable for shape modeling and non-contact equipment, comparing with a razer scanner. The optical scanner not only has all merits that non-contact methods have but also improve a veil phenomenon which is a razer scanner's demerits. However, the optical scanner has not been used extensively because the measurements are not very precise and there are not the definite methods of measurements, Hence, this study is to find out how parameters such as camera's hight, angle, luminous intensity, distance to object, and so on have an influence on measuring using the optical scanner and to establish the methods of measuring precision.

• Archives of Pharmacal Research
• /
• v.14 no.2
• /
• pp.99-102
• /
• 1991

A hight performance liquid chromatographic methods was developed for the seperation and determination of seven alkaloids in "sanjoin" (the seeds of Zizyphus jujuba Rhamnaceae), a plant with potent sedative activity. A reverse phase system of Lichrosorb RP-Select B column and 0.05 M potassium phosphate buffer (pH = 3.5)-acetonitrile with gradient elution was employed. Two known alkaloids, juzirine and lysicamine, were newly isolated fom "sanjoin"."sanjoin".oin&".ot;.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1143-1149
• /
• 2014

The adsorption experiments of lithium ions were conducted in the fixed bed column packed with activated carbon modified with nitric acid. Effect of inlet concentration, bed hight and flow rate on the removal of lithium ions was investigated. The experimental results showed that the removal and the adsorption capacity of lithium ions increased with increasing inlet concentration, and decreased with increasing flow rate. When the bed height increased, the removal and the adsorption capacity increased. The breakthrough curves gave a good fit to Bohart-Adams model. Adsorption capacity and breakthrough time calculated from Bohart-Adams model, these results were remarkably consistent with the experimental values. The adsorption capacity was not changed in the case of 3 times repetitive use of adsorbent.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.86.1-86.1
• /
• 2014

Two substellar companion candidates with planetary mass, around a T-Tauri star in the ${\rho}$ Ophiuchi star-forming region, are discovered by results of Subaru Telescope's near-infrared imaging. Candidates are separated by 1400au and 500au. If these candidates were real companions, they are the widest-orbit and the lowest mass planetary-mass companions(PMCs) candidates. This discovery may suggest that PMCs form via extreme case of cloud core fragmentation for multiple stars. And also stellar disk are imaged by HiCIAO, hight contrast instrument for exoplanets and disks, with Subaru Telescope. This could be the first case, which imaged both of planetary mass companions and disk around same star. Even two companions candidates are not bounded around the star, they still could be one of the lowest mass objects. In this presentation, I will discuss about observations and confirmations of these objects, and the latest results about their properties.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.133-139
• /
• 2010

From the ancient times, there are waves in the ocean. And all the moving body have energy. We have a kind of hope to convert the wave energy into electric one. Finally we can find out a power generator mechanism that mainly use the principle of pulleys. We have made drawings for this and completed the wave energy converter. This wave energy converter consists of several pulleys, rope, generator, buoys and anchors. The distance between an anchor and buoy is changed according to the hight of waves. Several sets of anchors, pulleys and buoys can make the movement of rope, and the ropes wind up a converter axis. In case of 1 meter movement of the buoy, the winding distance will be amplified 2 or 3 times if we use several moving and fixed pulleys. Based on this concept, we developed 2 kind of prototypes. One is for the test in the laboratory and the other is for the field test. Through the two test, we could confirm the usability of this mechanism.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.117-124
• /
• 2012

The purpose of this study is to investigate the change of wind environment for different building arrangement. In this study, we analyze outdoor wind environment on different building arrangement that take same floor area ratio using the CFD (Computational Fluid Dynamics) method. We do not consider the effect of temperature. Building arrangements of low density, different hight and a lot of green area will change the effect of wind environment. The eight different arrangements of buildings are studied in this paper. In these calculations, we know the different arrangement of buildings change outdoor wind environments. Especially, reducing the number of building and crossing the different height of buildings have a good kind of wind environment at the same floor ratio. We know that these arrangement of buildings to reduce the heat island phenomena on city plan.