• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.277-282
• /
• 1989

Xanthan gum is a biopolymer produced by Xanthomonas campestris. In xanthan gum fermentation, the fermentation broth changes to highly viscous non-Newtonian fluid as xanthan gum concentration increases. Maximum xanthan gum concentration is limited by high viscosity of the broth since mass transfers of nutrient and oxygen are inhibited. Int this study the mass transfer effects were investigated in batch and fed-batch fermentations at various agitation speeds and by separate oxygen transfer experiments. Xanthan gum production rate was observed to be largely dependent on oxygen transfer coefficient; while cell growth rate was not affected highly by this factor.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.679-690
• /
• 1997

Oil spill over the sea and the river become a serious problem in these days. Two different approaches are used to clean up the spilled oil by means of chemical dispersion and mechanical devices. If it is possible, removing spilled oil using mechanical devices are highly desirable in order not to worry about the secondary contamination from chemical treatment. One of the major unsolved problems using mechanical devices has been the recovery of highly viscous oil spill. So, the systematic experimental data for treating very viscous oil are still wanting. In the present study a series of experiments were carried out to study the effect of the rotational direction of the belt skimmer on the rate of oil recovery using Bunker C oil. Three different situations, namely, upward, downward and up-and-downward pickup rate have been investigated for variable belt speed. The results showed that the rate of oil recovery for downward pickup was much higher than that for upward pickup. The major mechanism to recover the oil using a belt skimmer has been confirmed that oil sticks to the belt surface while moving to the water rather than moving upward. For the removal of spilled oil the optimal belt speed under the present experimental conditions was found to be about 200 ~ 270 mm/s just before the starvation started. The present experimental results would provide the basis for understanding the performance characteristics and physics of various types of skimmers.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.3
• /
• pp.262-267
• /
• 2006

The term temporomandibular disorders is used to describe a group of conditions that involve the temporomandibular joint, masticatory muscles, and associated structures. Many modalities have been proposed for treating temporomandibular disorders, including medication, physical therapy, occlusal stabilization splints with or without manual repositioning, surgery, and arthrocentesis. Temporomandibular disorders are treated in a step-wise manner. Initially, conservative treatment is used. Depending on the response, more aggressive interventions may be necessary. This usually takes the form of arthrocentesis. Arthrocentesis is used in the treatment of not only acute, closed, and locked TMJs but also various other temporomandibular disorders. Recently, the intra-articular injection of sodium hyaluronate after arthrocentesis was shown to have long-term palliative effects on TMJ symptoms. Synovial fluid consists of plasma and glycosaminoglycan, including hyaluronic acid derived from synovial cells. Sodium hyaluronate, the sodium salt of hyaluronic acid, is a high-molecular-weight polysaccharide and a major component of synovial fluid. This highly viscous substance has analgesic properties, lubricant effects, and anti-inflammatory actions; it causes cartilage formation and plays a role in the nutrition of avascular parts of the disc and condylar cartilage. We conclude that the intra-articular injection of sodium hyaluronate is effective for treating temporomandibular disorders.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.30-37
• /
• 2001

A Numerical simulation for the propulsion of axisymmetric body by contractive and dilative motion is carried out. The present analysis shows that a propulsive force can be obtained in highly viscous fluid by a contractive and dilative motion of axisymmetric body. An axisymmetric analysis code is developed with unstructured grid system for the simulation of complicated motion and geometry. The developed code is validated by comparing with the results of stokes approximation with the problem of uniform flow past a sphere in low Reynolds number($R_n=1$). The validated code is applied to the simulation of contractive and dilative motion of body. The simulation is extended to the analysis of waving surface with projecting part for finding out the difference of hydrodynamic performance according to the variation of waving surface configuration. The present study will be the basic research for the development of the propulsor of an axisymmetric micro-hydro-machine.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.138-142
• /
• 2007

본 연구는 고점도 유체의 혼합을 위한 교반기 설계의 기초연구로서 스크류 형상의 임펠러(또는 헬리컬 임펠러)를 가지는 교반기 내의 유동과 이에 따른 유체혼합 특성을 수치해석을 통해 가시화한 것이다. 이와 더불어 양호한 혼합효과를 가져다 줄 것으로 예상되는 엇갈림형 스크류 임펠러의 모델을 제안하였다. 수치해석상의 유체는 고점도의 Newton유체로 가정하였으며 임펠러의 회전속도는 6[rpm]으로 아주 작게 하여 저 레이놀즈수(약 Re=3)에서 혼합효과를 연구하였다. 또한 각종 설계 파라미터를 변화시켜 혼합 양상의 차이를 분석하여 설계에 반영하고자 하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.236-242
• /
• 2007

A theoretical and numerical investigation is performed on the flow in a micronozzle for precision-controlled seal dispenser. The working fluid is a highly viscous epoxy used as sealant in producing LCD panels, which contains a number of tiny solid spacers. Flow analysis is conducted in order to achieve the optimal design oj internal geometry of a nozzle. A simplified design analysis methodology is proposed for predicting the flow in the nozzle based on the assumption that the Reynolds number is much less than O(1). The parallel numerical computations are performed by using a CFD package FLUENT. Comparison discloses that the theoretical model gives a good prediction on the distribution of pressure and wall shear stress in the nozzle. However, the theoretical model has a difficulty in predicting the maximum wall shear stress as found in a limited region near edge by numerical computation. The theoretical and numerical simulations provide the good guideline for designing a dispensing micronozzle.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.269-274
• /
• 1995

For the screening of a new functional exopolysaccharide, sugar composition and rheological properties of exopolysaccharide produced from Xanthomonas sp. EPS-1 were investigated. The average molecular weight of exopolysaccharide was determined to be approximately 2.l $\times$ 10$^{6}$ dalton. The new exopolysaccharide EPS-1 was composed of mannose, glucose, galactose and gluco- samine. IR analysis showed that the exopolysaccharide EPS-1 was assumed to be polymer with carbohydrates. NMR analysis showed that exopolysaccharide EPS-1 was presumed to be 4 units of sugar and trace of CH$_{3}$ group. Exopolysaccharide EPS-1 solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1.0%, the consistency index and the flow behavior index were shown at 10.8352 poise-sec and 0.4419, respectively. All dispersions were pseudoplastic fluids described accurately by Power-law model. Exopolysaccharide EPS-1 was highly viscous at low concentration, with good stability over a wide range of pH 5 to 13. The excellent compatibility of exopolysaccharide EPS-1 was represented with salts such as sodium chloride.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.198-203
• /
• 2000

A highly viscous biopolymer from Bacillus coagulans CE-74 was purified and its rheological properties were studied The rheological properties of biopolymers produced by Bacillus coagulans CE-74 were studied at the temperature ranges with 20~8$0^{\circ}C$, at the concentration of 0.5~4.0%, at the pH ranges from 3 to 1 and at the shear rate fo 7.34~73.38 sec-1. The apparent viscosity of biopolymer was decreased with increasing shear rate, and thereby biopolymer showed pseudoplastic characteristics. Biopolymer solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1%, the consistency index and the flow behavior index were shown at 2.64 poise. sec11 and 0.8571, respectively. All dispersions were pseudoplastic fluids described accurately by Herschel-Bulkley model. The change of the biopolymer viscosity on pH showed the highest value at the pH 7.0 and it showed lower at acidic conditon that at alkaline condition comparatively.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.317-323
• /
• 2008

In the current study, A model for the flow analysis of fresh and highly flowable concrete has been developed using a particle method, the moving particle semi-implicit (MPS) method. The phenomena on the flow of concrete has been considered as a visco-plastic flow problem, and the basic governing equation of concrete particle dynamics has been based on the Navier-Stokes equation in Lagrangian form and the conservation of mass. In order to formulate a visco-plastic flow constitutive law of fresh concrete, concrete is modeled as a highly viscous material in the state of non-flow and as a visco-plastic material in the state of flow after reaching the yield stress of fresh concrete. A flow test of fresh concrete in the L-box was simulated and the predicted flow was well matched with the experimental result. The developed method was well showed the flow motion of concrete particles because it was formulated to be based on the motion of visco-plastic fluid dynamics.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.303-310
• /
• 2014

In order to reduce friction and improve reliability, researchers have applied various surface texturing methods to highly sliding machine elements such as mechanical seals and piston rings. Despite extensive theoretical research on surface texturing, previous numerical results are only applicable to isothermal and iso-viscous conditions. Because the lubricant flow pattern of textured bearing surfaces is much more complicated than that for non-textured bearings, the Navier?Stokes equation is more suitable than the Reynolds equation for the former. This study carries out a thermohydrodynamic (THD) lubrication analysis to investigate the lubrication characteristics of a single micro-dimpled parallel thrust bearing cell. The analysis involves using the continuity, Navier?Stokes, energy, temperature?viscosity relation, and heat conduction equations with the commercial computational fluid dynamics (CFD) code FLUENT. This study discretizes these equations using the finite volume method and solves them using the SIMPLE algorithm. The results include finding the streamlines, pressure and temperature distributions, and variations in the friction force and leakage for various dimple radii and depths. Increasing the dimple radius and decreasing the depth causes a recirculation flow to form because of a strong vortex, and the oil temperature greatly increases compared with the non-textured case. The present numerical scheme and results are applicable to THD analysis of various surface-textured sliding bearings and can lead to further study.