• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.459-465
• /
• 2007

This study was conducted to calculate the LCC of a apartment complex with a type of heating system, district heating and cogeneration system. For the purpose of analyzing LCC according to size of apartment complex, 500, 1,500 and 4,000 houses of model apartment selected. This research performs design of heating system and the life cycle cost analysis including an initial cost, energy cost, maintenance and operation cost, replacement cost and renovation cost during the project period(15years). According to the calculated results, 1) Initial cost of cogeneration system with 500, 1500 and 4000 houses is higher than district heating system each of 20%, 13%, 12%. 2) In case of cogeneration system, the payback period by electric generation is 5.21, 4.92 and 4.47 years and saving cost was calculated 29 billion won, 94 billion won and 262 billion won after payback period. 3) Cogeneration system LCC was 1.12, 1.07 and 1.06 times larger than district system with the size of apartment complex. According to the case of this study district heating system is more efficient than cogeneration system in terms of the reduction of LCC. 4) Gas Engine Co-generation System is more efficient than other systems because it can collect progressive part from electric charge progressive stage system. However, the efficiency is decreasing because of raising of fuel bills(LNG) and lowering of power rate for house use. Especially the engine is foreign-made so the cost of maintenance and repair is high and the technical expert is short. 5) District heating is also affected by fuel bills so we should improve energy efficiency through recovering of waste heat(incineration heat, etc.). Also, we should supply district cooling on the pattern of heat using of let the temperature high in winter and low in summer.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.61-66
• /
• 2006

It have been known that the probability of occidental happening in towing-barge is higher than that of other merchant vessels. Bemuse the towing-barge is restricted in thier manoeuvring ability due to its towingline. A report from ministry maritime affairs and fisheries said that the rate of collision occident for towing-barge is 40% high than other transport system in sea A number of researches have been carried out to improve the safety policy in the towing-barge sea transportation system by the gorvenment. This study examined the safety status in domestic towing-barge sea transportation system The registration status, safety operational policy and past occidental data were also examined A survey research of experts relating to towing-barge operation also was carried out to fine the detailed of safety status. This study would be applicable to set up safety policy for towing-barge marine transportation system.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.413-423
• /
• 1993

This paper reports an experimental study of direct containment heating (DCH) which would occur if the primary system pressure is still high at the time of vessel breach during a light water reactor core melt accident. The experiments were conducted in 1/30-scale cavity models of Kori unit 1 and 2 and Young Kwang unit 3 and 4 nuclear power plants. One 1/20-scale model of the Kori plant was also used to investigate the scaling effect. The primary variables in the experiments were initial vessel pressure, vessel breach size and cavity geometry. It is observed that higher initial pressure and larger breach size enhance the melt dispersal fraction. Also, the cavity geometry appears to affect the dispersal rate greatly. A simple correlation of melt dispersal fraction is proposed in terms of nondimensional effective period. This correlation shows good agreement with the present experimental data, the KAIST data and the BNL data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2000

Manual material handling(MMH)is major factor which causing physical injuries of worker at working area and frequency of low back pain(LBP) is increasing industrial accidents. Especially, working in bad circumstance such as farm, orchard, harbor loading and unloading, logging place and mining place which located in inclined slope can cause much possibility of hazard and absence of working balance can cause injuries of musculoskeletal system such as joint, bone, ligament. So, this study used EMG system to measure and evaluate muscle force information and fatigue of worker when lifting on slope. The result of measuring averaged integrated EMG(AEMG) shows multifidus muscle be used more than anything else in force. neck extensors are used at 15°, 20°frequently. generally the AEMG result shows multifidus muscle be used in force. Commonly, muscle fatigue of multifidus is higher than other muscle by analysis mean power frequency(MPF). The result of load sharing rate shows multifidus and erectorspinae which are deep spinal muscles is relatively high and neck extensor is low.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.706-714
• /
• 1995

Silicon oxide thin films were deposited by remote plasma chemical vapor deposition (RPCYD). The effect of the operating variables, such as plasma power, deposition temperature and partial pressure of reactant on the material Properties of the silicon oxide film was investigated. By XPS, it was found out that the film was suboxide (O/Si<2) and small amount of nitrogen due to the plasma excitation was accumulated at the Si/SiO$_2$interface. The amount of dangling bonds at the Si/SiO$_2$interfaces were measured by ESR and the concentration of hydrogen bond was obtained by SIMS and FT-IR. The bond angle distribution(d$\theta$/$\theta$) was shown to be similiar to thermal oxide above 20$0^{\circ}C$ but the etch rate was higher than that of the thermal oxides due to the structural difference and the stress between silicon substrate and silicon oxide film.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.606-613
• /
• 2014

The Internet of Things (IoT), which has recently attracted attention as next-generation IT industry, is based on a wired and wireless network platform that can connect various Things. However, it is challenging to implement the IoT platform because of the heterogeneity of the network. Particularly, the ZigBee transmission may be significantly harmed due to Wi-Fi with the relatively much higher power, and this is one of the reason making the platform implementation difficult. In this paper, the ZigBee transmission is measured and analyzed by the BEB algorithm for finding the slot time when ZigBee can transmit, and an actual transmission happens stochastically depending on the network environment. The simulation results show that it guarantees high success rate of the ZigBee transmission by overcoming Wi-Fi interference in the 2.4 GHz frequency band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.721-728
• /
• 2018

This paper introduces various linear block error correction code and compares performances of the correction circuits. As the risk of errors due to power noise has increased, ECC(: Error Correction Code) has been introduced to prevent the bit error. There are two representatives of ECC structures which are SEC-DED(: Single Error Correction Double Error Detection) and SEC-DED-DAEC(: Double Adjacent Error Correction). According to simulation results, the SEC-DED circuit has advantages of small area and short delay time compared to SEC-DED-DAEC circuits. In case of SED-DED-DAEC, there is no big difference between Dutta's and Pedro's from performance point of view. Therefore, Pedro's code is more efficient than Dutta' code since the correction rate of Pedro's code is higher than that of Dutta's code.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.83-89
• /
• 2013

In order to reduce the power consumption in international standard IEC62087, the luminance efficiency should be improved at the low discharge load rather than at the high discharge load. Thus, this paper analysed the characteristics of the discharge at the panels with ITO Gap of $65{\mu}m$, $80{\mu}m$, and $100{\mu}m$ in 50-inch PDP with FHD resolution. It was well known that the long gap panel improves the luminance and the luminous efficiency. However, it is very difficult to drive the panel due to high driving voltage. When the normal driving method was applied at the panel with ITO gap of $100{\mu}m$, the phenomenon of the double peak was generated in the sustain period. We confirmed that main factor of the double peak is the self-erasing discharge. When the CLHS driving method was applied at the panel with ITO gap of $100{\mu}m$, the self-erasing discharge was improved in the sustain period. Also, the $V_S$ and $V_A$ minimum voltage of the CLHS driving method decreased about 9V and 12V compared with those of the normal driving method. Moreover, when the CLHS driving method was applied to the panel with ITO gap of $100{\mu}m$, the luminance and the luminous efficiency increased compared with those of the normal driving method. The luminance and the luminous efficiency greatly increased at the low discharge load. The less discharge load, the higher increase rate of the luminance and the luminous efficiency. Especially, the luminous efficiency at ITO gap of $100{\mu}m$ increased about 26.3% at the discharge load of 4% compared with that at ITO gap of $65{\mu}m$.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.668-674
• /
• 2008

When various kinds of contents are developed in accordance with higher rate of Internet use to have quality conditions, added values can be elevated in genuinely strong power of Internet. As soon as visiting web site on Internet, men are invited to visit corresponding information web site by a variety of techniques and colors. The visual expression is thought to be important, and color plans of web designs play an important role. This is because the color decides on images of web design to transfer sense as an important element. The paper selected colors by each type of web site and investigated color images. The purpose of the paper is to classify local web sites by each type, for instance, identity, information/community, entertainment, shopping and learning, etc and to suggest directions of color image plan by each type of web site.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.6-9
• /
• 2011

Examples and experiences of risk management on radiation under prolonged exposure situation are shown. The accident of the Fukushima dai-ichi nuclear power plant after the great east Japan earthquake (11 March, 2011) elevates background level of environmental radiation around the east Japan. For example, ambient dose equivalent rate around Tohkatsu area next to Tokyo located about 200 km-south from the plant, is about 0.1-0.6 micro-Sv $h^{-1}$ mainly due to $^{134}Cs$ and $^{137}Cs$ falling on the ground soil. This level is about double or up to ten times higher than the genuine natural level around the area. International Commission on Radiological Protection (ICRP) recommends how to face the existing exposure situation; that is the prolonged exposure situation. Referring to ICRP's reports and/or related international/domestic documents, we have been discussing how to manage this situation and acting to gain safety and relief of public, who have a possibility to be exposed to prolonged lower-dose radiation. Here, we introduce our several experiences on risk management, especially focusing on risk communication, radiation education to public, and stakeholder involvements into decision making in local governments on radiation protection, relating to the accident.