• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.55-59
• /
• 1973

This experiment was carried out to improve on the simple and conventional processing method by studying the characteristics of poultry meat. For the experiment, 20 hens culled and 20 broilers were slaughtered and divided into the following five groups; whole carcass, skinned carcass, debonned carcass, thigh muscle and breast muscle. Each group was ground by the super grinding machine. The results tobtained are summarized as follows; (1) The percentage of the ready-to-cook of cull hens and broilers was $64.32{\pm}2.11,\;67.96{\pm}1.16$, and of the water uptake, $105.43{\pm}1.9,\;104.13{\pm}0.2$, respectively. (2) In the chemical composition, broiler meat showed high moisture content and a little low fat content, as compared with cull hen meat. By groups, whole carcass ground meat contained lower maisture content, and higher fat and ash content than thigh muscle and breast muscle. (3) Thigh muscle and breast muscle group was higher than the other and whole carcass group was lower for the relative WHC and water retention.(4) The higher temperature the higher cooking loss percentage in all groups, and whole carcass group was the highest cooking loss percentage among the all groups.(5) The significant difference was little observed for the relative WHC, water retention and cooking loss percentage by groups between cull hen and Broiler.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.4
• /
• pp.489-498
• /
• 2008

The objectives of this study were to provide fundamental information on how individual phenolic compounds form on the inside of apple slices during cold storage, the changes in the content of four types of phenols, ingredient variation of individual phenolic compounds and the influence of phenolic compounds on enzymatic browning. This study measured the changes in the content of soluble solids, pH and vitamin C in order to investigate the correlations between these variables. HD and FA were the main phenolic compounds found in the apple slices, and HD was the most prevalent phenol. Furthermore, comparison of the CG and EP content revealed that there were more CGs than EPs. The phenol content tended to decrease considerably in the fresh apple slices and water-dipped apple slices but only slightly in the CP from sucrose-dipped apple slices and 0.5% ascorbic acid solution-dipped apple slices. The degree of browning increased in the following order: fresh apple slices, water-dipped apple slices, 0.5% ascorbic acid solution-dipped apple slices and CP from sucrose-dipped apple slices. The vitamin C content tended to decrease in the fresh apple slices, water-dipped apple slices, 0.5% ascorbic acid solution-dipped apple slices and CP from sucrose-dipped apple slices. The pH tended to increase in all sample groups, but the pH of the water-dipped apple slices was lower than that of the comparison group. The CP from sucrose-dipped apple slices had the lowest value of pH. The change in soluble solids tended to increase in all treatment groups, but this increase was less in the CP from sucrose-dipped apple slice. Correlation analysis revealed a high degree of correlation between browning and chlorogenic acid content. The results of the present study show that, when stored in the fridge, the change in phenol ingredient content in apple slices influences the browning of the slices. The results also showed that HD and FA were the main phenolic compounds, while CG was shown to have the greatest influence on browning.

• Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.305-313
• /
• 2019

Background: This research aims to study the effect of climate change on the phenology, growth, and physiological traits of Silene capitata Kom., a Korean endangered species II. This study increased $CO_2$ concentration in a closed glass greenhouse, with the daily mean temperature and $CO_2$ concentration respectively being $4.61^{\circ}C$ and 93.63 ppm higher than the outside temperature (ambient conditions, control). The seeds of S. capitata were sown in control and treatment environments in March 2013 while seedlings were transplanted into individual pots in May 2013. To research phenological changes, the first day of the flowering and ripening of the plants transplanted in 2013 and first day of leafing in 2014 were observed. The growth and physiological responses of mature leaves were also studied in 2013. Results: There was no difference in the first day of flowering, but the first day of ripening was earlier in the treatment group than the control group. There was no difference in the number of rosette leaves between the two groups, but leaf area was wider in the treatment group than the control group. Transpiration rate and stomatal conductance were higher in the treatment group than the control group, chlorophyll content decreased, and photosynthetic rate and water use efficiency were the same for both groups. As a result of simple regression analysis among the transpiration rate, stomatal conductance, photosynthetic rate, and water use efficiency, stomatal conductance increased when transpiration rate increased. Stomatal conductance increased with photosynthetic rate in the control unlike in the treatment group. The photosynthetic rate and water use efficiency increased with transpiration rate in the control group unlike in the treatment group. Furthermore, water use efficiency increased as photosynthetic rate increased in both groups. Conclusion: Due to high $CO_2$ concentration, the photosynthetic rate was no longer controlled by the stomata, which appeared to suppress the excessive production of photosynthetic products by reducing chlorophyll content. It is believed that the phenological responses of S. capitata under climate change conditions will advance and that stable growth will be difficult in regions lacking moisture due to the high transpiration rate.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.87-99
• /
• 2012

Targeting 9 types of rocks, which have high frequency of excavation, the researcher has analyzed decreasing behaviors of elastic modulus due to water content. The elastic modulus decreasing behaviors have been classified into 5 steps by uniaxial compressive strength. The results indicate that all of 5 sedimentary rocks and andesite show single decreasing behavior and granite, rhyolite, and gneiss demonstrate another decreasing behavior. Moreover, sensitivity of water content in granite, rhyolite, gneiss is almost twice as fast as that of the other rocks and their residual value of elastic modulus is very low.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.97-103
• /
• 2009

Sericulturists in the vicinity of Bangalore city irrigate their mulberry gardens with Vrishabhavathy stream water, which is polluted with domestic and industrial wastes from the city. To investigate the effect of pollutants on silkworm crops, a detailed field survey was conducted to study the cocoon yield pattern of the crops raised on mulberry irrigated with wastewater as against irrigation by bore/open wells. The villages along the stream were grouped into five test batches at about a distance of $5{\sim}8$ km from each other. The seasonal yield data with relevant information were collected through questionnaires from 117 rearers using stream water and 35 rearers using bore/open wells, the latter serving as control group. The average yield for 100 layings was 46 to 57 kg in the control group whereas in test groups, it ranged between 34 to 51 kg in the first test group and 22 to 38 kg in the rest. The difference in yield was $9{\sim}19$ kg depending on the season between control and test batches. In summer, this difference was higher, with high co-efficient of variation in test groups ($33{\sim}52$%). Further, water, soil and leaf samples were collected from selected rearers and were analyzed for zinc, copper, iron, lead and nickel. Results indicated significantly higher contents of these metals in samples from gardens using wastewater when compared control samples. Significantly (p<0.05 & p<0.01)) higher levels of zinc ($24{\sim}122$ ppm) and iron ($208{\sim}683$ ppm) were noticed in mulberry leaves during summer followed by winter and rainy season. The significance of high content of heavy metals in mulberry leaves and cocoon yield pattern of this area in relation to the quality of irrigation water is discussed.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.208-214
• /
• 2001

This study was conducted to investigate the influence of dietary oriental medicine refuse(OMR) and mugwort powder on physico-chemical characteristics of Korean Native Pork(KNP). KNP were randomly assigned to one of the three dietary treatments : 1) control (commercial feed) 2) T1 (commercial fed supplemented with 10% OMR powder) 3) T2 (commercial feed with 10% mugwort powder). 15 heads(♂) were feed one of the experimental diets for 5 months and slaughtered. In the proximate composition, moisture content showed slightly high in the T1, however, fat content were tended to be high in the control. The heating loss, shear value, WHC (water holding capacity) were not significantly between control and the treatments group. The T1 showed the lowest pH among treatments (P<0.05). In sensory evaluation, juiciness and tenderness of T1 and T2 were higher compared with that of control. Hunter a* did not show any difference among the treatments group. But Hunter L*, b* in treatment group(T1, T2) were higher than that of the control. Oleic acid, linoleic acid and unsaturated fatty acid contents of T1 and T2 were higher than the control. The total amino acid of the control, T1 and T2 were 18.290, 18.177 and 18.942mg%, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.297-306
• /
• 2023

Saemangeum Lake is the largest artificial lake in Korea. The continuous deterioration of lake water quality necessitates the introduction of novel water quality management strategies. Therefore, this study aims to identify the spatiotemporal water quality characteristics of Saemangeum Lake using data from the National Water Quality Measurement Network and provide basic information for water quality management. In the water quality parameters of Saemangeum Lake, water temperature and total phosphorous content were correlated, and salt, total nitrogen content, pH, and chemical oxygen demand were significantly correlated. Other parameters showed a low correlation. The spatial principal component analysis of Saemangeum Lake showed the characteristics of its four zones. The mid-to-downstream section of the river affected by freshwater inflow showed a high nutrient salt concentration, and the deep-water section of the drainage gate and the lake affected by seawater showed a high salt concentration. Two types of water qualities were observed in the intermediate water area where river water and outer sea water were mixed: waters with relatively low salt and high chemical oxygen demand, and waters with relatively low salt and high pH concentration. In the principal component analysis by time, the water quality was divided into four groups based on the observation month. Group I occurred during May and June in late spring and early summer, Group II was in early spring (March-April) and late autumn (November-December), Group III was in winter (January-February), and Group IV was in summer (July-October) during high temperatures. The water quality characteristics of Saemangeum Lake were found to be affected by the inflow of the upper Mangyeong and Dongjin rivers, and the seawater through the Garuk and Shinshi gates installed in the Saemangeum Embankment. In order to achieve the target water quality of Saemangeum Lake, it is necessary to establish water quality management measures for Saemangeum Lake along with pollution source management measures in the upper basin.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.201-208
• /
• 2019

Superabsorbent hydrogel (SAH) is a lightly crosslinked hydrophilic functional polymer material comprising a flexible chain structure, which can absorb and retain high amounts of water or aqueous fluids even under high pressure. Therefore, it is important to improve their characteristics such as absorption performance, residual monomer content, and water permeability. SAH nanocomposites were prepared using clay mineral as an inorganic filler and the influence of post-treatment processes such as quenching and aging process on their properties was studied. In addition, surface-crosslinking process was applied to improve the absorption performance associated with mechanical properties and water permeability. The structure of the SAH was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.685-690
• /
• 2018

In this study, a multifunctional ophthalmic lens material with an electromagnetic shielding effect, high oxygen permeability, and high water content is tested, and its applicability is evaluated. Metal oxide nanoparticles are applied to the ophthalmic lens material for vision correction to shield harmful electromagnetic waves; the pyridine group is used to improve the antibacterial effect; and silicone substituted with urethane and acrylate is employed to increase the oxygen permeability and water content. In addition, multifunctional tinted ophthalmic lens materials are studied using lens materials with an excellent antibacterial effect (2,6-difluoropyridine, 2-fluoro-4-pyridinecarboxylic acid) and functional (UV protection, high wettability) lens materials (2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy)benzophenone). To solve problems such as air bubbles generated during the polymerization process for the manufacturing and turbidity of the lens surface, polymerization conditions in which the defect rate is minimized are determined. The results show that the polymerization temperature and time are most appropriate when they are $110^{\circ}C$ and 40 minutes, respectively. The optimum injection amount of the polymerization solution is 350 ms. The turbid phenomenon that appears in lens processing is improved by 10 to 95 % according to the test time and conditions.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.427-435
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There's a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07m3m-3 for sand, 0.l1m3m-3 for loam, 0.12 for clay, and 0.13m3m-3 for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)'s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter. Key words : SMAP(Surface Moisture Availability Parameter), Paddy field, Volumetric soil water content, Evaporation, Capillary potential.