• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.51-56
• /
• 2012

The effect of deformation induced martensite transformation on the mechanical properties in austenitic stainless steel with high Mn was studied. ${\alpha}$'-martensite was formed by deformation in austenitic stainless steel with high Mn. Deformation induced ${\alpha}$'-martensite was formed with surface relief by cold rolling. With the increase of deformation degree, volume fraction of deformation induced martensite was increased rapidly in early stage of deformation and then, increased slowly. With the increase of deformation degree, hardness and tensile strength were rapidly increased with linear relations, while elongation was rapidly decreased and then slowly decreased. Hardness, tensile strengths and elongation were influenced strongly by deformation induced martensite.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.55-56
• /
• 2015

In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used natural aggregate and blast furnace slag for testing. The test results showed that the sieve analysis and high heat exposure of the flow and air volume increased according to the increase of mixing rate of FGD while the cyclotomy decreased. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased to its maximum when the mixing rate of FGD was right around 10%, and especially showed a high trend with cyclotomy and sieve analysis.

• Bioinformatics and Biosystems
• /
• v.1 no.1
• /
• pp.51-60
• /
• 2006

The paradigm in biology is currently changing from that of conducting hypothesis-driven individual experiments to that of utilizing the results of a massive data analysis with appropriate computational tools. We present LayMap, an implemented visualization system that helps the user to deal with a high volume of the biomedical literature such as MEDLINE, through the layered maps that are constructed on the results of an information extraction system. LayMap also utilizes filtering and granularity for an enhanced view of the results. Since a biomedical information extraction system gives rise to a focused and effective way of slicing up the data space, the combined use of LayMap with such an information extraction system can help the user to navigate the data space in a speedy and guided manner. As a case study, we have applied the system to datasets of journal abstracts on 'MAPK pathway' and 'bufalin' from MEDLINE. With the proposed visualization, we have successfully rediscovered pathway maps of a reasonable quality for ERK, p38 and JNK. Furthermore, with respect to bufalin, we were able to identify the potentially interesting relation between the Chinese medicine Chan su and apoptosis with a high level of detail.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.818-825
• /
• 2016

Network management and anomaly detection are challenges in high-speed networks due to the high volume of packets that has to be analysed. Flow-based analysis is a scalable method which reduces the high volume of network traffic by dividing it into flows. As sampling methods are extensively used in flow generators such as NetFlow, the impact of sampling on the performance of flow-based analysis needs to be investigated. Monitoring using sampled traffic is a well-studied research area, however, the impact of sampling on flow-based anomaly detection is a poorly researched area. This paper investigates flow sampling methods and shows that these methods have negative impact on flow-based anomaly detection. Therefore, we propose an efficient probabilistic flow sampling method that can preserve flow traffic distribution. The proposed sampling method takes into account two flow features: Destination IP address and octet. The destination IP addresses are sampled based on the number of received bytes. Our method provides efficient sampled traffic which has the required traffic features for both flow-based anomaly detection and monitoring. The proposed sampling method is evaluated using a number of generated flow-based datasets. The results show improvement in preserved malicious flows.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.1-8
• /
• 2005

Linear motor can be directly applied to the system needed linear motions without rotary motions. To control high-speed and high-resolution, the development of the linear motors is recently required in the high-integrated and speed process industry This paper presents thermal and vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the thermal behaviors and vibration characteristics of the advanced products. The thermal measurements are conducted for comparing the developed linear motor with the advanced linear motor and the Finite Volume Method(FVM) is used to identify the measurement results. And then the vibration measurement are carried out in the developed and advanced linear motors with respect to the speed. To identify the measurement results, the Finite Element Method is utilized in the developed and advanced linear motors, respectively. The FVM, FEM, and experiments make it possible to understand these characteristics. The improvement is suggested through their results conducted experiment and analyses.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.113-124
• /
• 2016

This paper presents the effect of silica fume and nano silica, used individually and in combination with the set accelerator and/or hydrated lime, on the properties of class F high volume ultra fine fly ash (HV-UFFA) cement composites, replacing 80 % of cement (OPC). Compressive strength test along with thermogravimetric analysis, X-ray diffraction and scanning electron microscopy were undertaken to study the effect of various elements on the physico-chemical behaviour of the blended composites. The results show that silica fume when used in combination with the set accelerator and hydrated lime in HV-UFFA cement mortar, improves its 7 and 28 day strength by 273 and 413 %, respectively, compared to the binary blended cement fly ash mortar. On the contrary, when nano silica is used in combination with set accelerator and hydrated lime in HV-UFFA cement mortar, the disjoining pressure in conjunction with the self-desiccation effect induces high early age micro cracking, resulting in hindering the development of compressive strength. However, when nano silica is used without the additives, it improves the 7 and 28 day strengths of HV-UFFA cement mortar by 918 and 567 %, respectively and the compressive strengths are comparable to that of OPC.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.99-104
• /
• 2010

We introduce Internet TCP/IP control system to monitor the traffic volume on the traffic network system. To check the traffic volume on traffic road, we use the traffic detector system shppe of circle or diamond or rectangular. Nevertheless we use traffic detector, we will use internet addressin TCP/IP system. If we use TCP/IP control system, we acquire many good point, we achive high sircurity and low costness traffic monitoring system coming difficulty and high level position. But internet system is very easy and low cost direction. Traffic control system is very more depending on the high techinquesion and very complexity. Therefore we introducing TCP/IP internet addressing control system schemetic point.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.207-207
• /
• 2008

Modern industry has focused on processing that produce low- loss dielectric substrates used complex micron-sized devices using tick film technologies such as tape casting and slip casting. However, these processes have inherent disadvantages fabricating high density interconnect with embedded passives for high speed communication electronic devices. Here, we have successfully fabricated porous alumina dielectric layer infiltrated with polymer solution by using inkjet printing process. Alumina suspensions were formulated as dielectric ink that were optimized to use in inkjet process. The layer was confirmed by field emission scanning electron microscope (FE-SEM) for measuring microstructure and volume fraction. In addition, the reaction kinetics and electrical properties were characterized by FT-IR and the impedance analyzer. The volume fraction of alumina in porous dielectric alumina layer is around 70% much higher than that in the conventional process. Furthermore, after infiltration on the dielectric layer using polymer resins such as cyanate ester. Excellent Q factors of the dielectric is about 200 when confirmed by impedance analyzer without any high temperature process.

• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.221-231
• /
• 2013

This study was carried out to investigate the quality characteristics of Jeung-pyun using high yielding type rice (Dasan, Keunseom) and processing type rice (Daerip, Seolgang, Yangjo) for applying a new processes in rice food industry. The weight, volume, specific volume and expansion of Jeung-pyun were the highest in Dasan. The shapes of cross section showed that the air cell of Jeung-pyun made from Dasan and Daerip were smaller and more regular than Keunseom, Seolgang, and Yangjo. The Jeung-pyun of Daerip was the highest in L value, springiness, cohesiveness and chewiness, Keunseom was the highest in a value and hardness; Yangjo was the highest in b value, adhesiveness and gumminess. Jeung-pyun of Dasan was shown, through sensory evaluation, to be the highest in flavor, appearance and overall preference. The Jeung-pyun of Daerip was the highest in color and taste preference, while Seolgang was the highest in texture preference.

• Fashion, Industry and Education
• /
• v.14 no.2
• /
• pp.11-23
• /
• 2016

This study investigated the comparative advantages of the Bangladeshi and Vietnamese apparel industries using Global Value Chain (GVC) framework. In this study, the GVC framework was expanded to include social and environmental sustainability issues. Secondary data, for the 2012 - 2013 period, were collected and analyzed for each component of the apparel GVC. The findings indicated that while both countries have unique comparative advantages, Vietnam clearly emerged as a leader on many GVC components. Bangladesh's comparative advantage lies in lower wages, producing high volume orders, and lean manufacturing. In spite of Vietnam's higher labor costs, it has comparative advantages in higher productivity, skilled and trained workers, manufacturing of intricate styles of high quality, agility and flexible manufacturing, more developed infrastructure and logistic services as well as greater social and environmental compliances. This study contributes towards insight into best sourcing fit for fashion brand business models. Based on the findings, fashion driven companies offering more complex styles at a faster rate will benefit from choosing Vietnam. In contrast, Bangladesh might be a better choice for high volume driven companies that offer basic apparel and better value for their consumers. From theoretical perspective, the research makes an important contribution by expanding the GVC framework.