• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.50-54
• /
• 2006

A fire in a subway station platform, completely isolated by screen doors, was numerically simulated to investigate problems in smoke control and find their countermeasures. A part of the platform, $40m{\times}5m$ floor and 3 m high, and a fire of 1 MW were considered, and the smoke extraction system was assumed to start operation at the onset of the fire. For three different values of the exhaust air flow rate, 0.1, 2, and $4m^3/min-m^2$, the distributions of temperature, concentrations of soot and carbon monoxide, and those of visibility were compared. The time-variations of the number of randomly distributed particles in the space were also investigated for the air flow rates to see the efficiency in smoke control. It was shown that smoke control takes time by lack of air supply. It was also confirmed that air supply from the railway to the platform at emergency is needed so that smoke is able to be controlled efficiently, and that opening the doors at the both ends of the platform is desirable until the fire is completely extinguished.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.95-104
• /
• 2013

As global warming and depletion of fossil fuel are considered as urgent problems, the development of electric vehicle (EV) is getting more attention by automobile industry. However, the wide adoption of EVs is not coming yet, because of many issues such as long recharging time and high cost of batteries etc. As an alternative solution to the conventional battery charging EV, the idea of battery exchanging EV is introduced. To realize the battery exchanging business model, one should solve the issues of ownership and reliability of battery. To address such issues, the concept of battery sharing should be considered together with good traceability system. In this study, we studied RFID code structure to provide better visibility and traceability for shared EV batteries. The proposed RFID code and code generation system is based on GRAI-96 of EPCglobal and included factors such as chemical, physical, and manufacturing features. The designed code can be also used as the ID of each battery.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1559-1569
• /
• 2000

CHILL96 is recommended as development language for telecommunication systems by ITU-T. In this paper, we describe the design and implementation of CHILL96 compiler using C++ intermediate code. Translation rules from CHILL96 to C++ are designed for code generation. The CHILL96 compiler is composed of four parts such s syntax analyzer, visibility checker, semantic analyzer and code generator, and each part has very close relationship with symbol table and abstract syntax tree. Performance evaluation has been performed for feasibility study. After performance evaluation, we conclude the CHILL96 compiler using C++ intermediate sho good performance compared with other CHILL compilers. In addition to high performance and portability, the CHILL96 compiler using C++ intermediate code helps application developers to maintain and enhance telecommunications software by translating CHILL96 program to C++ program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.1-7
• /
• 2019

This paper presents low-complexity single-image dehazing to enhance the visibility of outdoor images that are susceptible to degradation due to weather and environmental conditions, and applies it to various devices. The conventional methods involve refinement of coarse transmission with high computational complexity and extensive memory requirements. But the proposed transmission estimation method includes excellent edge-preserving performance from comparison of the pixel-based dark channel and the patch-based dark channel in the vicinity of edges, and transmission can be estimated with low complexity since no refinement is required. Moreover, it is possible to accurately estimate transmissions and adaptively remove haze according to the characteristics of the images via prediction of the atmospheric light for each pixel using joint bright and dark channel (JBDC). Comprehensive experiments on various hazy images show that the proposed method exhibits reduced computational complexity and excellent dehazing performance, compared to the existing methods; thus, it can be applied to various fields including real-time devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.537-547
• /
• 2017

This study evaluates the wearing performance of a self-contained breathing apparatus (SCBA) belt for firefighters in Korea. A SCBA belt design was suggested based on the wearing evaluation of a SCBA belt; subsequently, prototypes I and II were created. A wearing evaluation of prototypes with improved design and design preference was performed. Six designs elements of the SCBA belt for firefighters were suggested based on the survey results of wearing the SCBA belt and for the SCBA belt design preference for use by firefighters. First, belt material should be made of black high-strength aramid textiles. In addition, Velcro should be used to attach and detach retroreflective and fluorescent materials along with various colors for visibility. Second, the chest belt should be made of the same material used for other parts; in addition, the chest belt should be moved to the center for center of gravity and a cobra buckle should be applied. Third, an O-ring should be applied to the back and the belt connected to the O-ring should distribute the weight in six axes. Fourth, a detachable air respirator should be able to separate by using upper and lower cobra buckles. Fifth, a separable leg belt and a detachable pocket are also suggested. Sixth, a ring for walkie-talkies, alarms and equipment as a fabric ring are also suggested. Prototype III with an improved design was created based on the results of the design suggestion.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.505-513
• /
• 2009

Recently, researches on the construction information for construction of high-tech cities are under performed. RTLS(Real-Time location system) for gathering the dynamic location information of construction resources in construction sites, such as workers, materials and equipments, is one of the developments. Especially, construction resources can be managed efficiently with the dynamic location information and the improvement of safety and the reduction of cost are expected. To introduce the RTLS to the construction sites, the installation location of AP(Access Point) must be simulated using the 3-dimensional visibility analysis considering the propagation distance of AP. In this research, 3-dimensional signal simulation software based on the spatial data using surveying terrestrial LiDAR is developed. The simulated results are compared with the signal strength of field experiments for 4 test sites. As a result, the signal strength from the propagation model is most similar to that of field experiment at the front of the main building and the maul playground of Konkuk University. The visibilities in that sites are higher than other sites. among 4 test sites.

• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.271-278
• /
• 2014

The purpose of this study is to know optimized fat suppression techniques for brachial plexus compared with STIR and SPAIR T1, T2 techniques. A total of 30 normal volunteers without brachial plexus disease were studied on a 3.0 T MRI scanner. As an analytical method, SNR, CNR, 4-point grading scale were evaluated by using three pulse sequences. As a quantitative analysis, the SNR, CNR for SPAIR T1 technique provided high value in branchial plexus roots (03.07, -2.25), branchial plexus trunks(06.70, 36.31)(p<0.05). As a qualitative Analysis, The visibility for delineation of brachial plexus, fat suppression, artifact was significantly better on SPAIR T1(3.2, 3.6, 3.4) technique(p<0.05).

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.46-53
• /
• 2016

LED light sources have been known to have a long life and good energy efficiency compared to traditional light sources. Recently, headlamps using LED light sources have ensured the forward visibility and safe operation of high-speed rolling stock. However, assessing the lifespan of LED headlamps based on real test data is not easy because it depends on the multiple stress factors such as a fixed driving current, junction temperature, vibration and so on. Generally, LED headlamps have failed before their advertised life span mainly due to temperature. Thus, the performance assessment of a temperature control unit should be done before a life cycle test of LED headlamps. This study attempted to develop a prototype temperature control module for a lifecycle test system using a commercial LED headlight and verified the system through experiments.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.351-357
• /
• 2017

This paper proposes a LED bicycle headlamp with a wide viewing angle to help bicyclists see the front effectively and because of its high visibility to reduce the risks of accidents around intersections or blind spots. The wide viewing angle was determined to be $28^{\circ}$ because it can illuminate a 5 m wide area 10 m away. Therefore, the road conditions of the intersection can be observed with the bicycle handlebar tilted slightly to the left or right. The headlamp has a compact reflector with a width of 30 mm, height of 27 mm, and length of 17 mm. Owing to its size, a change in the position of a light source leads to severe changes in light distribution. Therefore, the tolerance of the source position was analyzed by a simulation. The tolerance was ${\pm}0.5mm$ at the X, Y and Z axes within a less centered aiming range of ${\pm}1^{\circ}$. Finally, the prototype of the bicycle headlamp was made and the light distribution was measured by an automotive headlamp light measurement system. The experimental results indicate that the headlamp illuminates a 5 m wide area with an edge light of 3.2 lx as well as meeting the K-mark regulation.