• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.46-47
• /
• 2018

High performance concrete with low water-to-cement ratio has been widely used with increased demand of high rising buildings and huge scaled structures. Additionally, for high performance concrete, various SCMs are replaced to improve its performance from fresh state to hardened state. With the drawback of increased viscosity of the concrete mixture for high performance concrete, low-viscosity typed high range water reducer is the relatively new admixture. Therefore, as a goal of the research, under using various SCMs with wide range of content, the performance of low-viscosity typed high range water reducer was evaluated. Especially, in this research, the influence of low-viscosity typed high range water reducer on rheological properties including plastic viscosity and yield stress were assessed. As a result of the research, it is expected to provide a fundamental information of low -viscosity typed high ranged water reducer on high performance concrete with various conditions of SCMs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.353-356
• /
• 2005

Strength development of low heat portland cement(Type IV) concrete in high strength range is tested. In this study strength development according to water-binder ratio, strength development according to age, effect of fly ash and super plasticizer are tested. This study tests effect of low heat portland cement in high strength range concrete and provide guide line concrete mix design for later study and/or construction.

• 대한물리의학회지
• /
• 제10권1호
• /
• pp.37-43
• /
• 2015

PURPOSE: The purpose of this study is to investigate the effect of the physical therapy treatment room environment using microwave diathermy on the autonomic nervous system of human body. METHODS: Participants were 24 healthy adults. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences(RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were compared in microwave irradiation and non-irradiation group. Data were analyzed in Wilcoxon's signed-ranks test and Mann-Whitney U test. RESULTS: Standard deviation of all normal R-R intervals (SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different in microwave irradiation group. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different in microwave non-irradiation group. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different between two groups. CONCLUSION: There was no significant change in the sympathetic nervous system and parasympathetic nervous system regardless of the presence of microwave irradiation. There was no significant change in the autonomic nervous system adaptability regardless of the presence of microwave irradiation.According to this study, microwave diathermy does not have significant effect on the autonomic nervous system.Future study is necessary to investigate the long term effect of the physical therapy treatment room environment using microwave diathermy on the autonomic nervous system of the human body.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.63-67
• /
• 1990

The purpose of this study was to investigate the effects of flexural strength ratio(Mr=$\Sigma$Mc/$\Sigma$Mb) with High-Strength Concrete up to 800Kg/$\textrm{cm}^2$. Five specimens were tested under reversed cyclic loadings. The primary variables were flexural strength ratio of the beam-column, compressive strength of concrete and loading patterns. The results showed that the failure at the beam-column joint in case of high strength concrete was severe more than in case of normal strength concrete when flexural strength ratio 1.4. Thus the part for low limit of flexural strength ratio(Mr=1.4) should be revised for high strengthconcrete.

• ETRI Journal
• /
• 제36권6호
• /
• pp.889-893
• /
• 2014

This paper presents a high-performance dual-circularly polarized feed employing a dielectric-filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter-wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end-launch-type coaxial-to-waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.397-398
• /
• 2006

In late years, from a trend for ecology of auto motive engine, low emission and low fuel consumption of engine become a social assignment. At the same time, the high output (high efficiency) is required, too. In order to meet those requirements, in comparison with conventional engines, lean A/F (Air fuel ratio) setting is becoming popular for the high performance engines of late years. Exhaust valve seat (sintered material) used in these engines has a problem in wear resistance, because it is exposed to the surroundings that is clean and a high temperature in comparison with the conventional engines. Therefore, wear mechanism with lean A/F of engine was analyzed.The exhaust valve seat (sintered material), that was superior in wear resistance, was developed.

• Journal of Nutrition and Health
• /
• 제21권1호
• /
• pp.47-60
• /
• 1988

This study was performed to investigate the effect of dietary levels on protein metabolism in eight healthy Korean adult females. The 20-day metabolic study consisted of 2 day adaptation period and three 6-day experimental. Three experimental diets were low protein (LP : protein 44g), high protein(HP : protein 85g) and high animal protein (HAP : protein-84g). The apparent absorption and balance on nitrogen were significantly higher in high protein than in low protein diet. Nitrogen, absorption rate was about 75% for low protein and about 85% for high protein intake. The mean values of nitrogen balance were -1.28% for low protein and 0.78% for high protein diet. All the subjects were in negative nitrogen balance at the low protein intake while they were in positive nitrogen balance at the high protein intake. The mean daily urinary nitrogen excretion increased with increased level of protein intake. Urea nitrogen was the largest part of the urinary nitrogen. The ratio of urea nitrogen to total urinary nitrogen increased significantly for 79 to 85% as protein intake was doubled.

• 소성∙가공
• /
• 제23권1호
• /
• pp.23-28
• /
• 2014

The aspect ratio of a hole is defined as the ratio of the thickness to the diameter of the sheet metal. Most holes in the sheet metal industry are made by piercing. However, for thick sheets, which have an aspect ratio greater than 2, a machining process like drilling instead of piercing is usually used to make holes. In the current study, piercing, which is a shearing process, is evaluated to punch a hole with a high aspect ratio by using a newly designed die set-up. The piercing die was manufactured to prevent the punch from buckling and also to improve the alignment between the die components. An aluminum alloy sheet was selected for the experiments. The influence of several process parameters such as sheet thickness, clearance and stripping force were investigated. Experimentally, a hole with an aspect ratio of 5 was pierced. The resulting hole had a clean surface and the dimensional accuracy of pierced hole was considerably improved with decreasing clearance between punch and die. It is also shown that the larger penetration depth of the effective sheared surface can be achieved for high aspect ratio piercing relative to conventional piercing with a low aspect ratio.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.84-93
• /
• 2022

To implement carbon-neutrality in transportation sectors until 2050, hydrogen is considered a promising fuel for internal combustion engines because hydrogen does not contain carbon itself. Although hydrogen does not emit CO₂ emission from its combustion process, the low energy density in a volume unit hinders the adoption of hydrogen. Therefore, the understanding of hydrogen jet behavior and measurement of equivalence ratio must be conducted to completely implement the high-pressure hydrogen direct injection. The main objective of this research is feasibility test of hydrogen local equivalence ratio measurement by laser-induced breakdown spectroscopy (LIBs). To visualize the macroscopic structure of hydrogen jet, high-speed schlieren imaging was conducted. Moreover, LIBs has been adopted to validate the feasibility of hydrogen local equivalence ratio measurement. The hydrogen injection pressure was varied from 4 MPa to 8 MPa and injected in a constant volume chamber where the ambient pressure was 0.5 MPa. The increased injection pressure extends the vertical penetration of hydrogen jet. Due to the higher momentum supply when the injection pressure is high, the hydrogen has easily diffused in all directions. As the laser trigger timing has delayed, the low hydrogen atomic emission was detected due to the longer mixture formation time. Based on equivalence ratio measurement results, LIBs could be applied as a methodology for hydrogen local equivalence ratio measurement.

• 동아시아식생활학회지
• /
• 제20권5호
• /
• pp.823-835
• /
• 2010

The research aimed to measure the efficiency of using multi stores in a foodservice company using by DEA (data envelopment analysis) which is a new management science technique. The study also attempted to identify relevant variables affecting DEA efficiency in order to suggest methods for improving efficiency. The data were collected from 148 contract foodservice operations, which were operated in similar fashion in October 2009. The DEA efficiency was calculated as an output-oriented BCC Model. Sales, and CSI (customer satisfaction index) were used as output variables whereas food cost, labor cost, and management expense were used as input variables to calculate the DEA efficiency. Operation process variables of the unit consisted of the were consist of ratio of regular employee, ratio of housekeeper, meal counts, meal price, food cost per meal, contract period, number of menu items, forecasting accuracy, order accuracy, inventory turnover, use of processed food, deviation of food cost, number of new menus, and number of events. According to the BCC score and profitability, units were classified into four groups: High efficiency-high profitability (HEHP), High efficiency-low profitability (HELP), Low efficiency-high profitability (LEHP), and Low efficiency-low profitability (LELP). The HEHP group contained 54 units, which mostly contracted management fee type and had a high meal price. The units were also very large and, served three meals. Twenty of the units were operated with high labor cost: most of these were factories and hospitals. The LEHP group contained 20 units, that were mainly office stores of large scale and medium price. Fifty-four LELP group had a low meal price. A high performance group must have high efficiency, profitability, and satisfaction. The BCC score was over 0.969, the meal price was over 4,116 won, the food cost was over 2,077 won, and meal counts per month were over 10,212 meals.