• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.156-162
• /
• 2017

국내 시멘트 산업은 시멘트 제조 시 발생되는 $CO_2$를 감축하기 위해 $CO_2$발생의 주요 요인인 클링커 대신 시멘트 대체재료 사용을 확대하기 위한 다양한 기술 개발을 위해 노력하고 있다. 이에, 최근 플라이애시를 다량 치환한 하이볼륨 플라이애시 시멘트(HVFC)에 대한 연구 가 활발히 진행되고 있다. 하지만, 플라이애시의 다양한 장점에도 불구하고 낮은 조기강도 발현 특성이 플라이애시를 다량으로 활용한 바인더의 현장적용에 있어서 가장 큰 문제로 지적되고 있다. 본 연구는 이러한 한계를 극복하고자 플라이애시 혼입률에 따른 HVFC 페이스트의 수화 및 압축강도 특성을 파악하기 위해, 플라이애시 혼입률 0~80%의 배합을 이용하여 실험을 수행하였다. 실험결과 낮은 물-바인더 비에 의한 HVFC 페이스트 배합은 초기 재령에서의 낮은 압축강도의 한계점을 극복할 수 있을 것으로 판단된다. 또한 중량비의 50% 이상이 플라이애시로 치환된 페이스트의 응결시간이 증가하는 경향을 보아, 플라이애시 중량비 50%는 충진 효과의 임계점으로 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.411-420
• /
• 1996

Asia Triple HIn this study an attempt was made to determine the cost of producing fodders at Savar Dairy Farm (SDF). For this purpose, all seasonal fodders, such as Maize, Jowar, Cowpea and Oat and all perennial fodders, such as Para and Napier were studied. The highest acreage of land was allocated to high-land Para (33.8%) and the lowest acreage (2.7%) was devoted to Cowpea. Jowar attained the highest yield (74.2 tons) per hectare and Maize attained the lowest yield (25.8 tons/h). The highest cost per hectare was attributed to Jowar (TK. 20944.18) while the lowest cost was attributed to low-land para (TK. 10349.86). The cost of production of fodder per kilogram was the highest (TK. 0.66) for Maize and the lowest for Oat (TK. 0.24). The cost of production of low-land Para was much lower than that of high land Para. The per kilogram cost of silage production was the highest (TK. 0.71) for Maize and the lowest (TK. 0.31) was for Napier. The gross return analysis further showed that the highest net margin and B:C ratio were observed for Napier followed by Low-land Para, Jowar, Oat, Cowpea, High-land Para and Maize. Therefore, those fodders whose B:C ratios and yield/ha were higher should be allocated more area of land to stimulate increased returns to SDF in the future is suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.567-570
• /
• 2000

This study is designed to manufacture the continuous foamed concrete and the sound absorption characteristics investigation due to continuous voids ratio. According to the results of experiment, it was shown that continuous voids of the foamed concrete has the influence of the amount used of foaming agent, the viscosity and flowability of cement paste, and also is shaped by cohesive power of bubbles. Also the sound absorption ratio of the foamed concrete is subject to increase as the density becomes low by raising the continuous voids ratio. The cement paste with low water-cement ratio and high cement fineness are very effective to prevent weak strength of formed concrete caused by the increase of the porosity.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.57-66
• /
• 2012

When typical Z-source DC/AC inverter(ZSI) is operated in high voltage gain area, because of its high duty ratio, voltage and current stress in Z-network of typical ZSI are increased. This paper proposes a new switched trans ZSI(STZSI) with two switched trans cells which consist of one trans and two diodes. To confirm the operation performance of the proposed system, the PSIM simulation is performed for typical ZSI, switched inductor ZSI and the proposed STZSI. Voltage / current stress and transient state characteristics of each method are compared under the condition of DC input voltage 100[V] and output phase voltage 66[Vrms]. As a result, we confirmed that transient state of the proposed STZSI is short compared with the conventional ZSI because the high voltage gain is obtained using the same duty ratio, also a low duty ratio is required for the same output voltage. Finally, we could know the proposed system have low voltage and current stress in Z-network compared with the conventional ZSI.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.973-987
• /
• 2018

대부분의 기존 내진해석은 지반과 구조물을 각각 구분하여 수행되었고, 초고층 건물과 저층 건물에 대한 동적거동 비교 연구가 부족한 실정이다. 따라서 본 연구에서는 초고층 건물과 저층 건물의 동적거동을 파악하기 위하여 유한요소해석 프로그램을 이용하여 선정된 파라미터별로 민감도 분석을 실시하였다. 연구 결과, 초고층 건물의 수평변위, 층간변위비, 휨응력은 지반조건이 연약할수록, 저층 건물보다 장주기 지진파의 영향을 더 받는것으로 나타났다. 또한 초고층과 저층 건물의 취약부는 지반조건보다는 지진파의 종류의 영향이 더 큰 것으로 나타났다. 따라서 지반조건 및 지진파 종류가 건물에 미치는 영향을 참고하면 건물의 내진설계에 도움이 될 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.833-848
• /
• 2013

Nine rectangular-section of High Strength Concrete(HSC) beams were designed and casted based on the American Concrete Institute (ACI) code provisons with varying of tensile reinforcement ratio as (${\rho}_{min}$, $0.2_{{\rho}b}$, $0.3_{{\rho}b}$, $0.4_{{\rho}b}$, $0.5_{{\rho}b}$, $0.75_{{\rho}b}$, $0.85_{{\rho}b}$, $_{{\rho}b}$, $1.2_{{\rho}b}$). Steel and concrete strains and deflections were measured at different points of the beam's length for every incremental load up to failure. The ductility ratios were calculated and the moment-curvature and load-deflection curves were drawn. The results showed that the ductility ratio reduced to less than 2 when the tensile reinforcement ratio increased to $0.5_{{\rho}b}$. Comparison of the theoretical ductility coefficient from CSA94, NZS95 and ACI with the experimental ones shows that the three mentioned codes exhibit conservative values for low reinforced HSC beams. For over-reinforced HSC beams, only the CSA94 provision is more valid. ACI bending provision is 10 percent conservative for assessing of ultimate bending moment in low-reinforced HSC section while its results are valid for over-reinforced HSC sections. The ACI code provision is non-conservative for the modulus of rupture and needs to be reviewed.

• 한국치위생학회지
• /
• 제10권3호
• /
• pp.531-540
• /
• 2010

Objectives : In this study, following the cavity restorations with low copper conventional alloy, high copper admixed one and high copper unicompositional one, which are used the most frequently in a clinical setting at the present, to experiment the time-dependent changes of strength, bubbles were examined. Besides, to examine the detrimental effects of mercury contained in dental amalgam, the amount of mercury release was evaluated. Methods : As dental amalgams which were used herein, [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy] were selected for a low-copper conventional amalgam, a high-copper admixed one and a high-copper unicompositional one in the corresponding order. The formation of bubbles and the weight ratio of mercury release were evaluated using a field emission scanning electron microscope (FE-SEM). Thus, the following results were obtained: Results : 1. The time-dependent amount of mercury release reached a statistical significance in three types of alloys, which was shown in such a descending order as [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy]. 2. A low-copper conventional type, BESTALOY is a cutting type and it was found to have an increased formation of fine bubbles. In the remaining two types, [Hi-Aristaloy 21] (a high-copper admixed alloy) and [Sybraloy] (a high-copper unicompositional alloy), the time-dependent changes in the formation of bubbles was negligible. Conclusions : Accordingly, this type of mercury release from amalgam alloy denotes the difference in the weight ratio of total constituents between after 24 hours and after two weeks. But further studies are warranted to examine the amount of mercury release which is detrimental to human bodies. Besides, a low-copper conventional alloy is a cutting type and it was characterized by the abundant formation of bubbles in a time-dependent manner. This implies that the strength of amalgam is impaired, which should be considered in selecting the appropriate amalgam alloy in a clinical setting.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.141-147
• /
• 2017

최근 온실가스 감축을 위해 시멘트 클링커를 대체하여 고로슬래그 미분말을 다량 치환한 하이볼륨 슬래그 시멘트에 대한 연구 활발히 진행되고 있다. 하지만, 수화열 및 내구성 등 다양한 장점에도 불구하고 초기 재령에서의 낮은 강도 발현 등의 문제점으로 인해 실제 현장의 적용에 한계점을 가지고 있다. 본 연구는 이러한 점을 극복하고자 GGBFS 혼입률에 따른 페이스트의 압축강도, 수화열 등의 특성을 분석하였다. GGBS 분말도에 따른 4종류와 치환율 35%, 50%, 65%, 80% 4수준으로 하여 총 16개의 배합에 대해 실험을 수행하였다. 실험결과 낮은 물-바인더 비에 의한 고성능 하이볼륨 슬래그 시멘트 페이스트 배합은 초기 재령에서의 낮은 압축강도의 한계점을 극복할 수 있을 것으로 판단된다. 또한 GGBS의 분말도는 고성능 하이볼륨 슬래그 시멘트 페이스트의 초기 재령에서의 압축강도 증진에는 효과가 있지만, 28일 이후의 장기 강도에는 큰 영향이 없는 것으로 나타났다.

• Advances in aircraft and spacecraft science
• /
• 제6권6호
• /
• pp.515-528
• /
• 2019

The structural vibrations of a flat plate induced by fluctuating wall pressures within wall-bounded transonic jet flow downstream of a high-aspect ratio rectangular nozzle are simulated. The wall pressures are calculated using Hybrid RANS/LES CFD, where LES models the large-scale turbulence in the shear layers downstream of the nozzle. The structural vibrations are computed using modes from a finite element model and a time-domain forced response calculation methodology. At low flow speeds, the convecting turbulence in the shear layers loads the plate in a manner similar to that of turbulent boundary layer flow. However, at high nozzle pressure ratio discharge conditions the flow over the panel becomes transonic, and the shear layer turbulence scatters from shock cells just downstream of the nozzle, generating backward traveling low frequency surface pressure loads that also drive the plate. The structural mode shapes and subsonic and transonic surface pressure fields are transformed to wavenumber space to better understand the nature of the loading distributions and individual modal responses. Modes with wavenumber distributions which align well with those of the pressure field respond strongly. Negative wavenumber loading components are clearly visible in the transforms of the supersonic flow wall pressures near the nozzle, indicating backward propagating pressure fields. In those cases the modal joint acceptances include significant contributions from negative wavenumber terms.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1255-1260
• /
• 2006

This present study analyzed temperature depreciation ratio of window inside surface by KS F 2295 'Procedure for determining fenestration product condensation resistance values'. it estimated window indoor surface condensation due to variable environmental condition. Performance of condensation resistance by using temperature depreciation ratio until applied Low-e and Ar glazing improved about 45% from 24 mm clear. Temperature depreciation ratio by KS F 2295 considers analytic index of window condensation due to variable boundary condition.