• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.125-131
• /
• 2013

This study was carried out to develop a diesel engine for marine propulsion. This marine diesel engine was developed based on a 500Ps vehicle diesel engine. Many main parts, such as the intercooler, radiator, and engine controller were designed for the marine diesel engine. The intercooler was designed to be of sea water cooling type; inlet air is cooled by sea water. Engine coolant is cooled by sea water in the radiator too. The water cooling heat exchanger has high cooling performance. In the cooling system, consists of the intercooler and the radiator, the sea water passes through the intercooler and then the radiator, in sequence. This process is very effective compared to the reverse method in which sea water passes through the radiator and then the intercooler, in sequence. The control performance of the engine controller and the fuel injection rate were improved using an engine speed controller. This system was tested on an engine dynamometer and an exhaust gas analyzer using the marine diesel engine test method. Test results show that the 500Ps marine diesel engine satisfied the IMO NOx regulations; Tier II.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.271-275
• /
• 2019

Anodic $TiO_2$ nanotubes were simultaneously grown and doped with $RuO_2$ by single-step anodization in a negatively-charged $RuO_4{^-}$ precursor. Subsequently, a high positive voltage was imposed on the nanotubes in an $F^-$-based electrolyte (a process referred to as potential shock), which led to the formation of a through-hole $RuO_2$-doped $TiO_2$ nanotube membrane without significant loss of the $RuO_2$ catalyst. XPS results confirmed that the doped Ru metal was converted into $RuO_2$ as the potential shock voltage increased. Further increases in the potential shock voltage led to the formation of $RuO_x/Ru$ in the $TiO_2$ nanotubes. All of our results clearly showed that a through-hole catalyst-doped $TiO_2$ nanotube membrane can be produced by a sequence consisting of single-step anodization and the potential shock process.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.64-69
• /
• 2020

To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.55-56
• /
• 1998

The 3-D Fast Gradient Echo (Turbo FLASH, Turbo Fast Low Angle Shot) sequence is optimized to achieve a good T1 contrast using variable excitation flip angles. In Turbo FLASH sequence, depending on the contrast preparation scheme, various types of image contrast can be established. While proton density contrast is obtained when using a short repetition time with a short echo time and small flip angles, T1 or T2 weighting can be obtained with proper contrast preparation sequences applied before the above proton density Turbo FLASH sequence. To maximize the contrast to noise ratio while retaining a sharp impulse response (smooth frequency domain response), the excitation flip-angle pattern is optimized through simulation and experiments. The TI (the delay after the preparation sequence which is a 180 degree inversion RF pulse in the IR T1 weighted imaging case), TD (the delay time between the Turbo FLASH sequence and the next preparation), and TR are also optimized fur the best image quality. The proposed 3-D Turbo FLASH provides $1mm\times1mm\times1.5mm$ high resolution images within a reasonable 5-8 minutes of imaging time. The proposed imaging sequence has been implemented in a Medison's Magnum 1.0T system and verified through simulations as well as human volunteer imaging. The experimental results show the utility of the proposed method.

• Journal of Information Science Theory and Practice
• /
• 제2권1호
• /
• pp.48-61
• /
• 2014

Using statistic and bibliometric methods to characterize scientific cooperation between China (excluding Hong Kong, Macao, and Taiwan) and South Korea through their bilateral co-authored papers covered by the Science Citation Index CD-ROM, 1991-2010, in our paper we exploit the feature of their cooperation in four levels: time sequence, academic community, key fields, and institution distribution. From the time sequence we know that collaboration between China and Korea starts in 1991, reaching the first peak during 2004-2007. As for the academic community, the number of Chinese corresponding authors (2414) is slightly lower than that of Korea (2700). Regarding the 27 high yield authors, there are only 4 coming from China. Korea has a higher active level than Chinese authors. China and Korea tend to cooperate with each other on strong disciplines such as physics, chemistry, material science, engineering, mathematics, pharmaceutical, computer science and biology. Furthermore, they also attach great importance to basic research and high-tech cooperation. Besides, Chinese Academy of Sciences ranks at the top 1 among the distribution of institutions. As a majority of the collaborative institutions are universities, the participation of non-university institutions is relatively low. There are 7 Korean universities among the top ten institutions, while Yanbian University and Tsinghua University in China rank respectively as third and fourth. Seoul National University, accompanied by Korea University and Yonsei University as the three top Korean universities, is also among the top among the cooperating institutions.

• 신재생에너지
• /
• 제19권4호
• /
• pp.46-52
• /
• 2023

Methane is the second most emitted greenhouse gas after carbon dioxide. Despite lower emissions than those of carbon dioxide, methane receives significant attention owing to its more than 20-fold higher global warming potential. Consequently, the importance of research on methanotrophic bacteria, microorganisms capable of converting methane gas into high-value materials, is increasingly emphasized. In the case of methanotrophic bacteria, knowledge on episomal plasmids that can be used for genetic engineering remains lacking, which poses significant challenges to the engineering process. The replication origin sequences of natural plasmids within methanotrophic bacteria have been predicted through in silico methods. The basic characteristics of the replication origin, such as a high A/T ratio, repetitive sequences, and proximity to proteins related to replication, have been used as criteria for identifying the replication origin. As a result, a region with a sequence of 18 base pairs repeated eight times could be identified. The putative replication origin sequence thus identified generally takes the form of iterons, but it also possesses unique features such as the length of the gap between iterons and the repetition of identical iteron sequences. This information can be valuable for future design of episomal plasmids applicable to methanotrophs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.233-236
• /
• 2001

Orthogonal freqency division multiplexing (OFDM) is an attractive technique for achieving high-bit-rate wireless data transmission. However, the potentially large peak-to-average power ratio (PAPR) has limited its application; An OFDM signal with the large PAPR can cause power degradation (In-band distortion) and spectral spreading (Out-of-band distortion) by being clipped passing through a power amplifier. Thus, we propose the combining algorithm of Hadamard transform and phase shift, which is ascribed to the relation between the correlation of the IFFT input sequence function and PAPR. Extensive computer simulations show that the combining algorithm is an effective technique to reduce PAPR.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.218-219
• /
• 2005

• 한국융합학회논문지
• /
• 제9권3호
• /
• pp.53-59
• /
• 2018

본 논문에서는 스마트 공장에서 의사결정 모델을 이용한 순차 마이닝 기반 제조공정을 제안한다. 제안하는 모델은 소규모의 제조공정에서 순차 마이닝 의사결정 모델을 적용하여 제조 효율을 높이는 방법이다. 제조 단계 중 제품 제조 과정에서 나타나는 데이터를 입력 변수들로 구성하고, 시간당 제조량과 불량률을 출력 변수로 구성한다. t-검정을 통해 유의수준이 높은 변수만을 사용하여 GSP 알고리즘과 REPTree 알고리즘을 이용한 규칙과 모델을 생성한다. 의미있는 순차 규칙과 의사결정 모델은 정확도, 민감도, 특이성, 예측도를 통해 유의미함을 확인한다. 결과적으로, 실제 제조에 적용한 결과 불량률은 0.38%가 개선되었고, 시간당 제조량은 평균 1.89/h 증가되었다. 이는 소규모 제조 공정에서 데이터 마이닝 분석을 통한 제조 효율을 높이기 위한 의미있는 결과를 나타낸다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.340-343
• /
• 2006

As the needs of consumer on ride comforts increase and the reduction of road traffic noise tightened step by step, the power unit noise emitted by cars has been reduced. It has been found that tire noise dominates noise produced by the power-train when vehicles are driven at high speeds. Therefore, in these days, tire/pavement noise is concerned. Tire/pavement noise is affected by pavement type and vehicle???s transmission loss. Tire noise mechanism is produced by several mechanisms. The sound of tire can propagate either through the air or through the structure of vehicle. Pattern noise is the result of pressure variations through the air to the interior side of vehicle. Especially, on smooth asphalt the periodicity of tread design, pitch sequence is important factor, which have an influence on the reduction of tire noise.