• 열처리공학회지
• /
• 제13권3호
• /
• pp.158-162
• /
• 2000

The high temperature oxidation behavior and the surface defect in Fe-25Mn-1.5A1-0.5C steel was investigated by XRD (X-ray Diffractin) and electron microscopy. The intra- and inter-granular oxides were formed by the selective oxidation of manganese and aluminum, which were identified to MnAl2O4 phase. Aluminum nitride (AlN) was formed in front of these oxides. The ${\gamma}$-matrix was transformed to ${\alpha}$- and ${\varepsilon}$- phases by the selective oxidation of manganese. The surface defect, micro-scab was induced by the difference of the high temperature ductility between the matrix and the inter-granular oxide.

• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.511-516
• /
• 2012

Low temperature ${\delta}$-precipitation phenomenon below 2-step aging ($718^{\circ}C$, $8hr+621^{\circ}C$, 8 hr) temperature of cold drawn Inconel 718 alloy wire was investigated. The investigation was carried out on wires with a cold drawn ratio of 0, 20, 50 and 70% using OM, SEM, XRD, TEM, and DSC. In microstructures of 50 and 70% drawn wire, many precipitates were found along the grain boundaries and the twin boundaries in deformation band. From the results of the XRD and TEM analysis, the precipitates were identified as plate-like ${\delta}$-phase. From the results of the DSC analysis, it was also found that a temperature of ${\delta}$-precipitation decreases with an increase of the cold drawn ratio. We concluded that cold drawing of inconel 718 wire promotes the ${\delta}$-precipitation, and under the condition of a high drawing ratio, the ${\delta}$-phase could be precipitated at a temperature below the aging temperature ($718^{\circ}C$).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.123-126
• /
• 2007

Deformation behavior of $Zr_{55}Cu_{30}Al_{10}Ni_5$ (at. %) bulk metallic glass (BMG) fabricated by suction casting method has been investigated at elevated temperatures in this study. The BMG was first verified to have an amorphous structure thru X-ray diffraction (XRD) and differential scanning calorimetry (DSC). A series of compression tests has consequently been performed in supercooled liquid temperature region to investigate the high temperature deformation behavior. A transition from Newtonian to non-Newtonian flow appeared to take place depending upon both the strain rate and test temperature. A processing map based on a dynamic materials model has been constructed to estimate a feasible forming condition for this BMG alloy.

• 소성∙가공
• /
• 제16권4호
• /
• pp.309-312
• /
• 2007

Deformation behavior of $Zr_{55}Cu_{30}Al_{10}Ni_5$(at. %) bulk metallic glass(BMG) fabricated by suction casting method has been investigated at elevated temperatures in this study. The BMG was first verified to have an amorphous structure with the analysis of X-ray diffraction(XRD) and differential scanning calorimetry(DSC) data. A series of compression tests has consequently been performed in the region of supercooled liquid temperature to investigate the behavior of high temperature deformation. A transition from Newtonian to non-Newtonian flow appeared to take place depending upon both the strain rate and test temperature. A processing map based on a dynamic materials model has been constructed to estimate a feasible forming condition for this BMG alloy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.474-477
• /
• 2002

We performed a continuous heat treatment experiment for long Si$_2$Sr$_2$CaCuO$_{x}$ (Bi2212) superconductor tapes on copper substrates. A precursor that contains a mixture of Bi$_2$O$_3$, SrCO$_3$, and CaCO$_3$ powders was prepared and screen-printed on Cu tapes. The screen- printed tapes were thermally treated by consecutive processes with various temperature settings using an air-filled tube furnace. The diffraction patterns and the microstructures of the high temperature superconductor thick films were analyzed by X-ray diffractometry (XRD) and optical Microscopy respectively, and the critical temperatures of the superconducting thick films were measured. The critical temperatures of the superconducting films were measured to be about 77K, and the films'crystallographic c-axes were confirmed to be normal to the film surfaces by XRD and morphology observation. We also observed that the thick superconducting layer is formed and aligned on the copper substrate via partial melted state that consists of a liquid phase and a secondary phase.e.

• 보존과학회지
• /
• 제30권3호
• /
• pp.249-261
• /
• 2014

본 연구에서는 강원도 원주 지역에서 발굴된 귀래2리 1호 가마터와 2호 가마터에서 출토된 백자의 제작 기술 및 사용 원료의 특징을 살펴보고 출토 백자 원료의 연관성을 도출하고자 하였다. X-선 형광분석기(XRF)와 X-선 회절분석(XRD), 열팽창계수 측정(Dilatometer), 유도결합 플라즈마 질량 분석법(ICP-MS) 및 유도결합 플라스마 방출 분광법(ICP-AES)을 이용하여 대상 시편에 대해서 각각 화학 조성과 결정상, 소성온도, 미량원소 및 희토류원소 등을 분석하였다. 귀래2리 가마터 출토 백자는 착색 산화물과 융제의 함유량이 높은 특징을 나타낸다. 소성온도는 시편마다 차이가 있지만 대부분 $1200^{\circ}C$ 이하에서 소성 되었으며 일부 시편은 $1000^{\circ}C{\pm}20^{\circ}C$에서 저온 소성되었고 귀래2리 1호 가마터 출토 백자 중 일부는 $1200^{\circ}C$ 이상 고온에서 소성되었다. 분석 대상 백자의 태토를 XRD 분석한 결과 모두 quartz와 mullite가 검출 되었으며 quartz와 mullite의 검출 비율은 모두 비슷하다. 출토된 백자 태토의 제겔식을 이용한 분석 결과 대상 백자 모두 같은 영역에서 군집하여 태토 원료와 제작 기법의 유사성을 확인할 수 있다. 또한 희토류 원소 분석 결과를 통하여 분석 대상 백자는 지질학적 성인이 동일한 모암으로 제작했음을 알 수 있다.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.274-280
• /
• 1998

Polycrystalline $Sr_2Nb_2O_7$ ceramics with very high Curie temperature were sintered using the powder derived by the chemical coprecipitation method (CCP). The phase evolution and grain-orientation of sintered samples were examined by XRD, while sintering behavior, dielectric properties and polarization were studied by SEM and ferroelectric tester. Extremely high degree of grain-orientation was observed along the (0k0) direction, which resulted in anisotropic dielectric properties of the sintered samples, with the dielectric constant values approaching those for single crystal. Thin film fabrication of $Sr_2Nb_2O_7$ in the pyroniobate family was also attempted on $SiO_2$/Si(100), Pt/$SiO_2$/Si(100), Pt/Ti/$SiO_2$/Si(100) and Pt/$ZrO_2/SiO_2/Si_2(100)$ substrates, using metalorganic decomposition (MOD) process. Neodecanoate precursor solution was prepared by mixing strontium neodecanoate with niobium neodecanoate synthesized from niobium ethoxide. It was found that $Sr_2Nb_2O_7$ single phase appeared in XRD patterns the samples annealed above $950^{\circ}C$. The effect of substrate type on film microstructure and dielectric properties was observed.

• 한국지형학회지
• /
• 제18권1호
• /
• pp.57-71
• /
• 2011

남해안의 고성에 위치하는 월치고개 단면은 10m 두께의 화강암 풍화층으로써, 10YR 4/4에 가까운 적색을 띠고 있어서 고온다습했던 고기후의 산물로 판단되기 쉬운 단면이다. 그러나 단면관찰과 박편분석, XRD 동정과 지화학적 분석을 통해 살펴본 결과, 열수변성의 대표광물인 할로이사이트가 단면 전체에서 보편적으로 나타나고 있으며, 한반도의 일반적 화강암 풍화층의 화학적 풍화율인 60~70%보다 훨씬 높은 97%에 달하였다. 이는 기후지형학적 풍화에 의해 형성된 적색풍화층이 아니라, 지열수에 의한 열수변성 가능성이 매우 높게 단면으로 판단된다.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.150-154
• /
• 1998

실리콘산화막에 실리콘이온주입을 $5\times1016/\textrm{cm}^2, 1\times10^{17}/\textrm{cm}^2, 3\times10^{17}/\textrm{cm}^2$으로 하여 열처리온도와 열처리시간을 변화시키면서 광루미니센스, XRD, TEM을 관찰하였다. 이온주 입량이 적고 열처리온도가 낮을경우에 가시광 광루미니센스를 관찰할 수 있었다. 광루미니 센스의 peak는 7420$\AA$과 8360$\AA$위치에 있었으며, 열처리시간이 길어짐에 따라 intensity는 각각 증가하였다. 이온주입량이 많고 열처리온도가 높을경우에는 광루미니센스가 관찰되지 않았다. 이온주입량이 적고 열처리 온도가 높을경우에는 열처리시간이 짧으면 가시광 광루 미니센스가 있으나 열처리시간이 1시간 이상으로 길어지면 광루미니센스가 사라졌다. XRD 와 TEM결과로부터 실리콘 cluster는 nonradiative defect와 관련있으며, 실리콘이온주입된 실리콘산화막에서 관찰되는 광루미니센스의 origin은 nanocrystal이 아니라 defect임을 알 수 있었다. 이온주입되는 실리콘이온의 량, 열처리온도와 시간의 변화는 광루미니센스를 변 화시키는데 이 현상들을 Si-O-O결합인 O위주의 결함과 Si-Si-O결합인 Si위주의 결함과 연 관지어 설명할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.61.1-61.1
• /
• 2010

$CuIn_{1-x}-GaxSe_2$ based materials with direct bandgap and high absorption coefficient are promising materials for high efficiency hetero-junction solar cells. CIGS champion cell efficiency(19.9%, AM1.5G) is very close to polycrystalline silicon(20.3%, AM1.5G). A reduction in the price of CIGS module is required for competing with well matured silicon technology. Price reduction can be achieved by decreasing the manufacturing cost and by increasing module efficiency. Manufacturing cost is mostly dominated by capital cost. Device properties of CIGS are strongly dependent on doping, defect chemistry and structure which in turn are dependent on growth conditions. The complex chemistry of CIGS is not fully understood to optimize and scale processes. Control of the absorber grain size, structural quality, texture, composition profile in the growth direction is important to achieving reliable device performance. In the present work, CIS nanoparticles were prepared by a simple wet chemical synthesis method and their structural and optical properties were investigated. XRD patterns of as-grown nanopowders indicate CIS(Cubic), $CuSe_2$(orthorhombic) and excess selenium. Further, as-grown and annealed nanopowders were characterized by HRTEM and ICP-OES. Grain growth of the nanopowders was followed as a function of temperature using HT-XRD with overpressure of selenium. It was found that significant grain growth occurred between $300-400^{\circ}C$ accompanied by formation of ${\beta}-Cu_{2-x}Se$ at high temperature($500^{\circ}C$) consistent with Cu-Se phase diagram. The result suggests that grain growth follows VLS mechanism which would be very useful for low temperature, high quality and economic processing of CIGS based solar cells.