• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2017

In this study, the change of composition of cement hardened at high temperature through XRD was observed. The specimen was made of cement paste and the heating rate condition was applied at rapid thermal annealing (10.0℃ / min). The decrease of calcium hydroxide was not confirmed, but the calcium carbonate tended to be impossible or decreased after 800℃. Calcium silicate and larnite were observed to increase with increasing temperature. It is considered that silicic acid, which is a stable structure due to the decomposition of calcium silicate, is changed into a phase such as lime.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.33-38
• /
• 1996

High temperature wear behaviors of plasma-sprayed ZrO$_{2}$-$Y_{2}O_{3}$ composite coatings were investigated for high temperature wear resistance applications. The composite powders containing 20, 50, 80 vol% of alumina for plasma spray were made by spray drying method. Wear tests with composite coated specimens were performed at temperature ranges from room temperature to 800$^{\circ}$C. Wear tests were also carried out with heat treated specimens at room temperature. The microstructural change of coatings and the worn surface were examined by SEM and XRD. Sharp increase of wear loss at high temperature wear test was observed in specimens containing 50 and 80 vol% alumina. Similar trend was observed in the heat treated coatings. The measured residual stress was increased with increased alumina contents and heat treating temperatures. Residual stress induced during heat treatment appeared to be responsible to the observed harmful effect of alumina additions on the high temperature wear.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.990-994
• /
• 2005

II-VI족 화합물 반도체를 성장하기 위한 MBE 성장 조건으로서 성장 온도, flux 율, 성장률에 대해 연구하였다. 성장 온도, flux 율, 성장률은 각각 290 $^{\circ}C$, 2, 0.6 ${\mu}m$/hr로 조절되었다. 위와 같이 설정된 성장 조건에서 단결정 성장을 확인하기 위하여 ZnSe 박막을 성장하였다. 성장된 박막의 AFM 측정 결과, 박막의 표면은 비교적 거칠었으며 (RMS ${\sim}$ 2.9 nm) 이는 낮은 성장 온도, 빠른 성장률로 인한 것임을 알 수 있었다. 그리고 XRD 측정 결과는 박막의 두께가 임계 두께를 넘어서 격자 정수의 부정합이 완화되었음을 보여주었다. XRD를 이용한 비파괴 방법으로 전위 밀도를 구하기 위해 (002), (004), (115), (006) 면에 대해 XRD를 측정하여 박막 내 전위밀도를 구하였다. XRD 측정 결과를 이용하여 계산한 결과 전위 밀도는 8.30${\times}10^8$ dis/cm$^2$로 종래의 연구와 비슷한 수준의 박막이 구현되었음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.455-459
• /
• 2002

I have investigated the effects of annealing on a polymeric $\alpha-C_3N_{4.2}$ at high pressure and temperature in the presence of seeds of crystalline carbon nitride films prepared by a high voltage discharge plasma. The samples were evaluated by x-ray photoelectron spectroscopy (XPS), infrared spectroscopy, Auger electron spectroscopy and x-ray diffraction(XRD). Notably, XPS studies of the film composition before and after annealing demonstrate that the nitrogen composition in $\alpha-C_3N_{4.2}$ material initially containing more than 58% nitrogen decreases during the annealing process and reaches a common, stable composition of ~43%. XPS analysis also shows that the nitrogen composition in the annealed films without polymeric $\alpha-C_3N_{4.2}$ was reduced from 35% to 17%. Furthermore the concentration of the sp$^3$bonded phase increased with the increment of the annealing temperature.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.85-88
• /
• 2011

세계적인 환경보호 추세에 발맞추어 단일 추진제 역시 강한 독성을 가지는 Hydrazine 대신 새로운 친환경 추진제를 찾으려는 노력이 계속되고 있다. 그 중 이온성 액체 추진제는 Hydrazine과 비교하여 낮은 독성, 높은 밀도, 그리고 높은 비추력을 가지고 있다. 이들 이온성 액체 추진제는 연소실 온도가 높아 감마 알루미나 등등의 촉매 지지체는 버틸 수가 없다. 따라서 고온에 안정적인 성능을 보이는 촉매가 필요하다. 바륨이 담지된 알루미나는 고온에서 Hexaaluminate로 변환될 수 있으며 그 열적 특성 또한 감마 알루미나보다 우수하다. 바륨이 담지된 알루미나에 백금을 올린 촉매의 특성을 알아보기 위해 $1300^{\circ}C$, $1400^{\circ}C$ 2시간 가열한 후 XRD, SEM, EDS, BET와 Drop test를 진행하였다.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.245-253
• /
• 2009

InAs/GaSb (8/8-ML) 응력초격자 (SLS)의 성장 변수를 최적화하기 위하여, 다양한 조건 및 모드에서 SLS 구조를 제작하여 고분해능 X선회절 (XRD) 특성을 분석하였다. 본 연구에서는 성장온도, V/III 분자선 비율, 성장일시정지 (growth interruption, GI) 등의 변화를 통하여 SLS 계면층의 응력 변조를 유도하였고, XRD 0차 위성피크의 변위로서 응력의 변화를 고찰하였다. XRD 분석 결과로부터, SLS의 결정성과 응력의 변화를 유발하는 주요 변수는 각각 성장온도와 V/III(Sb/Ga) 비율임을 보여 주었다. 압축변형을 가지고 있는 본 연구에서 제작한 SLS 시료는 V/III(Sb/Ga) 비율의 감소에 따라 인장변형으로 전환됨을 보여 주었으며, GI 모드 및 시간에 따라 응력이 민감하게 변함을 관측할 수 있었다. 본 연구 결과로부터, [InAs/GaSb]-SLS ([8/8]-ML)의 최적 성장온도와 V/III(Sb/Ga) 비율는 각각 $350^{\circ}C$와 20이고, 결정성을 극대화하고 응력완화를 감소시키기 위해서는 InAs 성장 직전 약 3초 동안의 GI방법이 유효함을 보였다.

• 한국광물학회지
• /
• 제26권3호
• /
• pp.175-187
• /
• 2013

나트로라이트(Na-제올라이트)의 탈수현상에 따른 변화와 특성을 라만 및 X-선 회절실험을 통하여 고온, 동시적인 고온-고압 하에서 특성을 확인하였다. 고온실험은 최고 온도범위에 따라 ${\sim}450^{\circ}C$까지 증온한 XRD 실험에서는 가역적 변화를 관찰하였고, ${\sim}630^{\circ}C$까지 증온한 라만분광실험에서는 포스트라트로라이트로 상전이하는 비가역적인 변화를 관찰하였다. 감온과정 약 $380^{\circ}C$에서 포스트 나트로라이트 상이 나타나는 온도구간을 본 연구에서 새롭게 확인하였다. 동시적인 고온-고압 하(상온 < T < $300^{\circ}C$, 0 GPa < P < 2.1 GPa)에서 나트로라이트 분광선의 이동은 관찰되지 않았다.

• Carbon letters
• /
• 제5권2호
• /
• pp.51-54
• /
• 2004

Isotropic pitch-based carbon fiber was isothermally activated in $CO_2$ atmosphere. Structural parameters of the isotropic carbon fibers and activated carbon fibers (ACFs) were evaluated by X-ray diffraction (XRD). The $d_{002}$ and La of the carbon fibers were measured to be 4.04 ${\AA}$ and 23.6 ${\AA}$ and those of ACFs were 4.29 ${\AA}$ and 22.7 ${\AA}$, respectively, representing less ordered through activation process. The pores in the ACFs were characterized by BET, and they showed super-high specific surface area of maximum value 3,495 $m^2/g$ from average pore size of 8.3 ${\AA}$ at 59% burn-off. It was recognized that 8-9 ${\AA}$ was optimum range of pore size for efficient creation of high specific surface area. The average size of the pores formed at higher temperature ($1100^{\circ}C$) was larger than that of the pores formed at lower temperature ($900^{\circ}C$).

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.938-946
• /
• 2008

Fe-base amorphous alloy and two crystalline phases composite were fabricated. The effect of temperature and strain rate on mechanical properties was evaluated utilizing compression test. Mixture of non-crystalline and crystalline phases were found using X-ray diffraction (XRD) and differential thermal analysis (DTA) tests. Based on glass transition temperature and crystallization temperature. compression tests were performed in the temperature ranging from $560^{\circ}C$ to $700^{\circ}C$ with $20^{\circ}C$ interval. Relationship between microstructure, including fracture surface morphology, and mechanical behavior was studied. The peak stress of Fe-base amorphous alloy was over 2GPa and expected to have a good wear resistance, but it is expected hard to deform because of low ductility. The peak stress and elongation of two crystalline phases composite was over 1GPa and about 20%, therefore it is possible to deform high strength wear resistant materials such as engine valve.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.104-108
• /
• 2016

To research the correlation between oxygen vacancy and the electrical characteristics of ZTO, which is made by using a target mixed ZnO:SnO₂=1:1, the ZnO, SnO₂ and ZTO were analyzed by PL, XPS, XRD patterns and electrical properties. It was compared with the electron orbital spectra of O 1s in accordance with the electrical characteristics of ZnO, SnO₂ and ZTO. The electrical characteristics of ZTO were improved by increasing the annealing temperatures, due to the high degree of crystal structures at a high temperature, and the physical properties of ZTO was similar to that of ZnO. The amorphous structure of SnO₂ was increased with increasing the temperature. The Schottky contact of oxide semiconductors was formed using the depletion region, which is increased by the electron-hole combination due to the annealing processes. ZnO showed the Ohmic contact in spite of a high annealing temperature, but SnO₂ and ZTO had Schottky contact. As such, it was confirmed that the electrical properties of ZTO are affected by the molecules of SnO₂.