• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.88.5-88
• /
• 2002

A new floating power supply for the current measurement system of a high voltage power line is developed. It is confirmed that, the current measurement system can stably transfer the signal of the power line current about 50 - 300 A by using the proposed power supply. The excellent characteristics are obtained by the steady-state and transient experiments of the proposed circuit. $\textbullet$ The right figure shows the external view of the trial measurement system for 6.6 kV. In order to see the inside, 120 degrees of the insulator is cut. The toroidal coil for the power supply and the Rogowskii coil for the current sensor are both divided into two and fixed on the power line as...$\textbullet$ The proposed circuit can supply +5V and -5V voltages without using a solar cell and/or a battery.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권4호
• /
• pp.287-295
• /
• 2019

The study aims to build a model for evaluating the effectiveness of activities and the effectiveness of financial investments in high-tech industries in Kazakhstan. The development of high-tech industries plays an important role in the economic growth of a country. In this regard, it is relevant to study the effectiveness of financing the most important industry in Kazakhstan. The development of the high-tech sector ensures the efficient functioning of the national innovation system. High-tech enterprises are one of the competitive sectors that allow us to develop and implement leading-edge innovations with the goal of their subsequent commercialization domestically and abroad. The author defines the multicriteria of efficiency in a knowledge-based economy associated with achieving an economic effect with multivariate correlation of results with costs. A multivariate dynamic model, an integral indicator of performance, an integral indicator of cost-effectiveness is proposed. The assessment of the effectiveness of financial costs and performance indicators in all regions of Kazakhstan have the positive dynamics of indicators, as well as a high economic effect. The results of the study can be applied in regional management to adequately assess the effectiveness of high-tech organizations and the effectiveness of financial investments, contribution to ensuring the economic security of the region.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.595-599
• /
• 2011

ALC(Autoclaved Lightweight Concrete) is produced using quartz sand, lime and cement and water. And aluminum powder is used for blowing agent. ALC is manufactured by autoclave chamber under high-temperature and high-pressure. Generally, ALC is 1/4 levels lighter than concrete and mortar, because it has a lot of pores. So density of ALC is about 0.45~0.65 g/$cm^3$. But, ALC has a weakness, typically low strength, with its porous structure. So, it is necessary to excellent strength properties for extensive apply of ALC materials in high porosity. In this study, melamine resin was used to improve the strength characteristics of ALC materials. We performed compressive and bending strength measurements. Compressive strength of ALC with 2% melamine resin increased 26.88% than 'melamine-free' ALC. Also we performed functionality evaluation such as thermal conductivity, sound absorption, and flame-resistance.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.230.2-230.2
• /
• 2003

Erdosteine, an expectorant, has been known to show a very poor flowability. Furthermore, high dosing amount (300mg/cap) and bulk density make it more difficult to fill in a capsule less than No. 0 size as bulk state. We have studied the possibility of dry granulation process in purpose of getting a better flowability and manufacturing efficiency. A roller compactor was introduced for this purpose and the applicability of laboratory result into commercial scale instrument was also experimented.Roller compacting process was very favorable to obtain the granules with good flowability and improved density profiles. (omitted)

• 건축구조
• /
• 제18권1호
• /
• pp.68-74
• /
• 2011

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.47-47
• /
• 2005

There are many different surface technologies currently applied for preparation of protein chips. However, it requires innovative surface chemistry for capture proteins to be immobilized on chip surface keeping their conformation and activity intact and their orientation right, while they bind tightly and densely in a given array spot. Proteogen has developed 'ProteoChip BP' coated with novel proprietary linker molecules $(ProLinker^{TM})$ for efficient and robust immobilizations of capture proteins by improving surface properties of molecular captures. It was demonstrated that $ProLinker^{TM}$ gave the best surface performance in preparation of protein microarray chip base plates among others currently available on the market. In particular, the $ProLinker^{TM}-based$ surface chemistry has demonstrated to provide excellent performance in preparation of 'Antibody Chip' for analysis of biomarkers as well as proteome expression profiles. The linker molecule has also shown to be well applicable for development of biosensors and micro-beads as well as protein microarray and nano-array. ProteoChip BP can be used either for preparation of high-density array by using a microarrayer or for preparation of 'Well-on-a-Chip' with low density array, which is better applicable for quantitative analysis of biomarkers or protein-protein interactions. The biomarker assay can be performed either by direct or sandwich methods of fluorescence immunoassay. Application of ProteoChip BP has been well demonstrated by the extensive studies of 1) tumor-marker assays, 2) new drug screening by using 'Integrin Chip' and 3) protein expression profile analysis. Some of experimental results will be presented.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1997년도 제11회 하계학술발표회 논문집
• /
• pp.224-243
• /
• 1997

The study examines the similarities of competitive strategy between fashion industry and high-tech industry through a case study of a Japanese maker. From the study, some implications are drawn for the Korean fashion industry. It is hoped that this, will help towards establishing a suitable competitive strategy for firms in this industry. In the fashion industry, the product life cycle is so short as to prompt a new product obsolete too quickly, and the extent of product differentiation is remarkably extensive compared to any other industry. Generally speaking, firms in this industry focus more of their resources on product development and marketing rattler than on production and they attempt to maneuver the speed when they are required to enhance their competitive edge. This is enabled through being, as one might expect, information- and technology- intensive as are high-tech industries. In this sense, that of the competitive strategy of a firm in fashion industry to be similar to high-tech industry. The Japanese firm Y has transformed itself a leading firm in fashion uniform segment. The firm could achieve this status by integrating each function needed for creating customer*s value, that is, product development, production and marketing within one Quick Response System. For this purpose, Y introduced a bundle of high-tech communication systems such as SPD, SDS, ATOM, NICS and so on. In this sense it can be said that Y was aware of what sort of competitive strategy was required in the industry. Implications for Korean firms is that, first, the magnitude of understanding the industry specific factors in establishing competitive strategy in the fashion industry, are speed, flexibility and systematic integration supported by high technology which are characteristic of high-tech industries. Secondly, as can be seen in the fact that Y emphasized logistics in its technological transformation, the significance of logistics control is a key to manipulating speed and flexibility in the industry. To sum up, those who have insight into above findings will be likely to keep their competitiveness in the industry not only in the Korean market but also in global market in the near future.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1309-1314
• /
• 2008

I.G.G is abbreviation for Inert Gas Generator, High temperature in Cargo Tank it desulfurize, exhausted and froze the gas that combined brimstone element and soot, then supply Inert gas by blower, and mack tank inside incombustible range this is equipment that nip in the bud the explosion. The blower for suppling inactivated gas has big impeller with heavy weight to achieve the high pressure, it causes a delay for first operation time and too much load is delivered to motor, total destruction by fire of motor is happening frequently. On this research, we will reduce the size & weight of impeller and install it with several stage, it makes an effect for reducing the first operation time. We also intend to contribute to efficient IGG blower design by research a flowing & pressure specialty from the diameter of impeller, number of blade, and size of casing.

• 융합경영연구
• /
• 제10권3호
• /
• pp.1-8
• /
• 2022

Purpose: This study aims to examine the effect of SMEs' R&D competence on management performance. Research design, data, and methodology: The empirical data of this study are derived from 2,375 SMEs that participated in the material, parts, and equipment research and development support project conducted from 2014 to 2018. Among them, 2,230 data were analyzed by classifying them into high-tech and low-tech fields. SPSS 24.0 was used for statistical analysis and correlation analysis and T-TEST were applied. Results: It was analyzed that the level of R&D organization, research personnel, and the number of patent registrations all affected operating profit and sales. In particular, it has been proven that research personnel have a greater impact on management performance among the level of R&D organization, research personnel, and the number of patent registrations. In addition, there was a difference between high-tech and low-tech industries in the impact on operating profit and sales, which are indicators of management performance. Conclusions: This study suggests that R&D competence are strengthened to advance the material, parts, and equipment industries and to promote future growth, while differentiated support is needed according to each company's R&D competence and technology level.