• International Journal of Vascular Biomedical Engineering
• /
• 제1권1호
• /
• pp.24-31
• /
• 2003

As endothelial cells are subject to flow shear stress, it is important to determine the detailed velocity distribution in microvessels in the study of mechanical interactions between blood and endothelium. This paper describes a velocity field of the arteriole in the rat mesentery using an intravital microscope and high-speed digital video system obtained by a highly accurate PIV technique. Red blood cells (RBCs) velocity distributions with spatial resolutions of $0.8{\times}0.8{\mu}m$ were obtained even near the wall in the center plane of the arteriole. By making ensemble-averaged time-series of velocity distributions, velocity profiles over different cross-sections were calculated for comparison. The shear rate at the vascular wall also evaluated on the basis of the ensemble-averaged profiles. It was shown that the velocity profiles were blunt in the center region of the vessel cross-section while they were steep in the near wall region. The wall shear rates were significantly small, compared with those estimated from the Poiseuille profiles.

• 무역상무연구
• /
• 제23권
• /
• pp.249-288
• /
• 2004

The active use of the container vessel has brought with it high speed and reduced transit time ; however, the system of delivering the goods via B/L at the destination has lagged behind technical advances, becoming a burden to today's international traders, especially consignees and/or importers. More recently the sea waybill(SWB), that is to say an ocean-type AWB, has come on the scene. In Europe and the USA the use of SWB has increased significantly, but has also left room for improvement due to its short history of use. However, Recently, more attention is paid to SWB as a means to solve the B/L Crisis is getting more and more serious. In addition, due to its non-negotiability, the sea waybill could easily be replaced by messages sent between the interested parties by Electronic Data Interchange. With the paper document, transfer of title is fulfilled by transferring the original bill of lading to the buyer of the goods. However, in an electronic environment this is difficult to replicate. A number of solutions have been investigated, including using an electronic bill of lading, by controlling changes in title to goods through irrevocable, but transferable instructions to the carrier, or by appointing an independent electronic data registry, or replacing the bill of lading with a sea waybill, which is non-negotiable. The purpose of this study is to investigate some problems which may hinder SWB from coming into wide use and to analyse how to solve problems due to introduction of electronic sea waybill.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.451-458
• /
• 2003

일반적으로 메타센터높이가 작은 선박이나 고속선의 경우에는 조종운동 시 큰 횡동요각을 유발하는 것으로 알려져 있다. 이러한 선박의 조종성능 예측 시에는 조종운동에 횡동요의 영향을 고려해야만 보다 정확한 결과를 얻을 수가 있다 즉, 조종운동을 다루는 전후동요, 좌우동요, 선수동요에 횡동요를 포함시키는 4자유도 운동방정식이 요구된다. 본 연구에서는 지금까지 여러 연구자들에 의해 제안되어 있는 4자유도 조종운동 수학모델을 검토 분석하고, 이들 실험자료를 재정리하여 보다 간결하고 실용적인 새로운 수학모델을 제안한다. 아울러 기존의 복잡한 수학모델과 새로운 수차모델에 의한 조종운동 시뮬레이션을 각각 수행하고 그 결과를 비교 검토하여 본 연구에서 제안한 수학모델의 유용성을 검증한다.

• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.80-87
• /
• 2000

Acute high speed accidents that results in full thickness skin defect and exposure of tendon, nerve, vessel and periosteum over denuded bone demands soft tissue coverage. Exposed bone often ensues chronic infection and requires free flap transplantation which surely covers defects in one stage operation and enhances transport of oxygen-rich blood and converts a non-osteogenic or partially osteogenic site into a highly osteogenic site, but exposed bone which had performed free flap transplantation sometimes necroses and needs secondary bone procedure. Scar contracture limits joint motion should be excised and covered with normal soft tissue to restore normal range of motion. Authors have performed the large latissimus dorsi myocutaneous free flap in 8 cases of extensive soft tissue defect and exposed bone lesion in the leg and 1 case of the flap was failed. The secondary ilizarov bone procedure was performed in 3 of 8 cases. 2 cases of large burn scar contracture and 1 case of posttraumatic scar contracture in lower extremity were restored with the large latissimus dorsi myocutaneous free flap. Authors concluded that large latissimus dorsi myocutaneous free flap is the most acceptable microvascular procedure in large soft tissue defect combined with exposed periosteum and bone requiring secondary bone procedure and in large burn scar contracture limiting knee joint motion.

• 한국항해학회지
• /
• 제19권4호
• /
• pp.1-8
• /
• 1995

Although ship's draught information onboard is substantial for both the safety of navigation and the estimation of loaded cargoes, its accuracy depends, in conventional surveying method, on the skillfulness of observers and the condition of the sea surface round the vessel. To obtain more accurate information accessibly, measuring instruments with sophisticated sensors such as mechanical, electronic and ultrasonic transducers have been developed. However, they have still limitation in accuracy and in making up a system due to the complexity of processing signal. In this paper, we propose a new technique for analyzing ultrasonic pulse signal, in order to improve the measurement accuracy and simplify a remote sensing system of draught by ultrasonic waves. In this technique, pulse signal is translated into phase curve which is composed of the phase value defined in time domain. Then, the time interval between two signals different in waveform, is waveform, is analytically determined by calculating average time difference on phase curves. Also, analytical procedure can be carried out in real time with the successive five data sampled at T/4, for high speed digital processing with computer and A/D converter. This technique is useful for measuring draught under the influence of sea condition and for interfacing its data briefly to the integrated bridge system.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.257-264
• /
• 1994

원자력발전소 중대사고시 용융된 노심과 잔류냉각수가 증기폭발을 일으켜 원자로 격납용기의 건전성을 위협할 수 있다. 본 연구에서는 증기폭발을 모사할 수 있는 실험 장치를 제작하고, 물과 프레온을 사용하여 증기폭발실험을 수행하였다. 이때 고속카메라를 사용하여 폭발현상을 관측하였고, 동압측정기와 압력분출관을 이용하여 생성되는 폭발압력과 기계적인 에너지를 계측하였다. 이를 토대로 증기폭발의 중요인자들(물의 온도, 물의 주입속도, 물의 주입 시간, 그리고 냉매의 깊이)에 대한 민감도 분석을 수행하였다. 그리고, 압력용기 바닥의 구조물이 용융/냉각재의 반응에 미치는 영향을 살펴보기위하여 실험용기 내부에 그리드를 설치하여 폭발실험을 실시하였다. 물/프레온의 폭발실험에서 계측된 기계적에너지를 이용한 에너지효율은 0.5∼l.6%인 것으로 계산되었다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.448-456
• /
• 2016

Severe accident scenarios in nuclear reactors, such as nuclear meltdown, reveal that an extremely hot molten core may fall into the nuclear reactor cavity and seriously affect the safety of the nuclear containment vessel due to the chain reaction caused by the reaction between the molten core and concrete. This paper reports on research focused on the type and amount of vapor produced during the reaction between a high-temperature molten core and concrete, as well as on the erosion rate of concrete and the heat transfer characteristics at its vicinity. This study identifies themass fraction and melting temperature as the most influential properties of concrete necessary for a safety analysis conducted in relation to the thermal interaction between the molten core and the basemat concrete. The types of concrete that are actually used in nuclear reactor cavities were investigated. The $H_2O$ content in concrete required for the computation of the relative amount of gases generated by the chemical reaction of the vapor, the quantity of $CO_2$ necessary for computing the cooling speed of the molten core, and the melting temperature of concrete are evaluated experimentally for the molten core-concrete interaction analysis.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.121-124
• /
• 2006

The arteries are very important in cardiovascular system and easily adapt to varying flow and pressure conditions by enlarging or shrinking to meet the given hemodynamic demands. The blood flow in arteries is dominated by unsteady flow phenomena due to heart beating. In certain circumstances, however, unusual hemodynamic conditions cause an abnormal biological response and often induce circulatory diseases such as atherosclerosis, thrombosis and inflammation. Therefore quantitative analysis of the unsteady pulsatile flow characteristics in the arterial blood vessels plays important roles in diagnosing these circulatory diseases. In order to verify the hemodynamic characteristics, in-vivo measurements of blood flow inside the extraembryonic arterial bifurcation cascade of chicken embryo were carried out using a micro-PIV technique. To analyze the unsteady pulsatile flow temporally, the (low images of RBCs were obtained using a high-speed CMOS camera at 250fps with a spatial resolution of $30{\mu}m\times30{\mu}m$ in the whole blood vessels. In this study, the unusual flow conditions such as flow separation or secondary flow were not observed in the arterial bifurcations. However, the vorticity has large values in the inner side of curvature of vessels. In addition, the mean velocity in the arterial blood vessel was decreased and pulsating frequency obtained by FFT analysis of velocity data extracted in front of the each bifurcation was also decreased as the bifurcation cascaded.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.325-334
• /
• 2021

In the open system (vessel and pipe), the maximum corrosion rate of carbon steel at ca. 80 ℃ was obtained due to the decrease of dissolved oxygen by increasing the solution temperature. Effect of temperature on the cavitation damage can be explained through several mechanisms. Moreover, when cavitation occurs on the surface of metal and alloys, whether cavitation is erosion or corrosion is still controversial. This work focused on the effect of solution temperature on the corrosion of carbon steel under cavitation in an open system, Tests were performed using an electrochemical cavitation corrosion tester in 3.5% NaCl solution and the effect of solution temperature of carbon steel was discussed. Cavitation corrosion rate can be increased by cavitation, but when the temperature increases, a dissolved oxygen content reduces at a very high speed and thus the maximum cavitation corrosion temperature changed from 80 ℃ to 45 ℃. Below the maximum cavitation temperature, the electrochemical effect was more dominant than the mechanical effect by increasing temperature, but over the maximum cavitation temperature, the mechanical effect was more dominant than the electrochemical effect by increasing temperature.