• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.962-967
• /
• 2004

A bogie is the device that connects a car body and wheel sets of a rail vehicle. It is the critical component that determine:; the running safety, The bogie consists of a frame, suspensions, brakes and wheel sets. Various analyses including a numerical simulation using a finite element method, a static load test, a fatigue test, ai)d r running test should be carried out to design the bogie. However cracks have been found at some end beams of the bogies mounted on the freight cars running with the high speed. The cracks of the end beam results in deterioration of the brake performance an the running safety, A new design has been suggested to solve this problem by ROTEM company and it's performance has been tested in this paper. Numerical simulations and dynamic tests are carried out to figure out the causes of cracks in the conventional bogie, and the vibrational characteristics of the improved bogie are compared with those of the conventional one.

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.603-609
• /
• 2015

Railway vehicles driven by wheels obtain force required for propulsion and braking by adhesive force between wheels and rails, this adhesive force is determined by multiplying adhesion coefficient of the friction surface by the applied axle load. Because the adhesion coefficient has a peak at certain slip velocity, it is important to determine the maximum values of the friction coefficient on the contact area. But this adhesive phenomenon is not clearly examined or analyzed. Thus we have developed new test procedure using the scaled adhesion test-bench for analyzing of the adhesion coefficient between wheel and rail. This adhesion test equipment is an experimental device that contacts mutually with twin disc which are equivalent to wheels and rails of railway vehicles.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.146-156
• /
• 1995

Growing international concern about environmental issues in recent years has led to new proposals for strengthening exhaust emission standards and fuel economy requirements throughout the world. The low emission vehicle(LEV) standards drawn up by the California Air Resources Board(CARB) in the U.S.A are noticeably stringent To cope with this regulation, a reduction of HC emission is the most important challenge for the automotive industry because HC emission levels are severer than any other components emission levels. In this paper, the apparatus for visulalizing the wall film flow in a intake manifold and the spark plug with optical fiber for detecting the signal from diffusion flame are developed to mal,e the HC formation mechanism clear. High speed camera system is also used to elucidate the correlation wall film flow and the diffusion flame. Using these methods, the effect of fuel injection systems such as injection direction, spray angle, atomised injection on HC emission levels is investigated. Consequently, the optimal fuel injection conditions for minimizing the wall film flow and reducing the HC emission are found through this research.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.73-79
• /
• 2003

Generally, field performance of elastomeric track pad components has been poor, especially for the medium to heavy tonnage tracked vehicles, which are operated on the hilly cross-country course. The service life of these track pad, is affected not only by the terrain and environmental conditions but also by the speed, cornering, braking, weight of the vehicle, and the track tread design. In this research, modulus, tearing energy, and the rate of crack propagation of vulcanizates are evaluated by changing base materials to improve the service time of track pad. By increasing the contents of carbon black, modulus, tearing energy, and fatigue crack growth resistance of vulcanizates improved. Compared with the NR vulcanizate, the HNBR vulcanizate had a higher value of tearing energy. The rate of crack propagation of vulcanizates using smaller size carbon black was slower than that using larger size carbon black. When the HNBR was blended with the ZSC, the tearing energy of the vulcanizates was a little reduced because of the high modulus but the crack propagation rate was reduced significantly. In the relation between the crack propagation rate and the strain energy release rate, though up to 100% strain were applied to specimens, the slope on the log scale ($\beta$) varied between 1.72 and 2.3 with the kind of elastomer.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.8-13
• /
• 2017

한국형 발사체 3단 엔진용 터보펌프 터빈에 관해 성능 시험을 수행하여 성능 특성 결과를 분석하였다. 터빈은 초음속 충동형 방식의 단단 형태이며, 노즐은 시동 노즐 1개와 정상 운전용 노즐 4개로 이루어졌으며, 부분 분사 형태로 되어 있다. 한국항공우주연구원 내의 고압 공기 터빈 상사 시험 설비를 이용하여 상사 시험을 수행하였다. 시험 결과 효율은 회전수 변화에 크게 변화하며, 이에 반해 압력비 변화에는 다소 작게 변화하는 초음속 충동형 터빈의 일반적인 특성을 보이고 있다.

• 한국항해항만학회지
• /
• 제28권8호
• /
• pp.753-757
• /
• 2004

선미파의 점성 상호작용과 수중고속선의 sub-breaking 현상을 해석하기 위하여 자유표면 유통을 수치적으로 시뮬레이션하였다. Navier-Stokes 방정식을 풀었으며 유한차분법, 물체적합좌표계, 벽법칙, 삼중격자법을 적용하였다. S-103 모형을 대상으로 준쇄파의 수치결과를 실험과 비교하였고 준쇄파 발생조건을 수중 고속선인 3차원 회전체에 대해 적용하였다. 준쇄파 해석결과에 의하면 M/Us 구배가 잠김 깊이에 영향을 미치고 있음을 알 수 있었다. 또한 선수파가 박리에 영향을 미쳐 선미파를 변형시킴을 확인하였다.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.57-63
• /
• 2017

본 연구에서는 플라즈마 분사장치를 활용하여 항력감소를 위한 기초 실험을 수행하였다. 가시화 장비와 항력 측정 장비를 이용하여 기초 실험 장치를 구성하였다. 자유유동 환경에서 분사되는 플라즈마 역분사 제트를 가시화하기 위한 방법으로 쉴리렌 기법을 활용하였다. 가시화 실험 결과를 통해 플라즈마 제트의 침투와 유동구조 변화를 관찰하였다. 항력감소 가능성을 측정하기 위한 방법으로 로드셀을 이용한 측정을 수행하였다. 그 결과 초음속 자유유동 조건에서 역으로 분사되는 플라즈마를 통해 항력이 6.2% 감소함을 보였다.

• Wind and Structures
• /
• 제14권1호
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.144-147
• /
• 2017

초고속 수상정의 추진 기관으로써 추력 조절 및 수중 운용이 가능한 하이브리드 추진 기관을 개발하였다. Ground Test Motor를 설계 및 제작하여 지상 시험을 통해 추진 기관의 성능을 검증하였으며, Underwater Woring Motor를 설계, 제작하여 지상 시험 및 수중 추진 시험을 수행하였다. 수중 운용을 위하여 2단계 점화 방식을 채택하였고, 점화 직전까지 수밀이 가능하도록 노즐 끝단에 파열판을 장착하였다. 최종 선정된 이중 파열판을 장착한 수중 추진 시험에서 성공적인 점화 및 추진이 이루어짐을 확인하였다.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.68-79
• /
• 1996

The present report describes the results of the cooperative experimental study organized by the High-Speed Marine Vehicle Committee of the Korea Towing Tank Conference. The study aims to improve model test technique and accuracy and to self-evaluate their own capabilities. The resistance tests of a 23m class planing hull were performed at the towing tanks of the Korea Research Institute of Ships and Ocean Engineering (KRISO), Hyundai Maritime Research Institute (HMRI), Seoul National University (SNU), Inha University (IU) and Pusan National University (PNU). In addition, the longitudinal wave cut was measured antral and analyzed at the KRISO. All the results of total resistance, trim and mean sinkage are presented in this report and the results show fairly good agreements comparing with the ITTC HSMV committee's report.