• The Korean Journal of Ecology
• /
• 제15권3호
• /
• pp.297-309
• /
• 1992

The growth of digitaria adscendens and eleusine indica, annual weeds common in japan, was experimentally analyzed under varying untrient conditions. compared with e. indica, d. adscendensshowed a higher the two under high nitrogen availability. Higher net assimilation rate(nar) in d. adscendens than e. india was responsible for high RGR in D. adscendens under the low nitrogen availability. The different of NAR in the two species was induced not by leaf nitrogen content but by nitrogen use efficiency. Under unfertilized conditions nitrogen uptake rate(nur) was greater in d. adscendens than e. indica. Specific absorption rate in two species was similar, but root mass was greater in d. adscendens than e. indica.d. adscendens allocated more dry matter to roots than e. india earlier stage of seedlings. The contributed to higher rot mass and in turn resulted in higher nur in d. adscendens than that in e. india. It is concluuded that the larger allocation of dry matter to roots at early seedling stage in d. adscendens plays an important role in obtaining nitrogen for the continuation of growth under low nitrogen availability.

• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.120-128
• /
• 2012

The fatigue crack growth behaviors of SA508 Gr.3 Cl.2 low alloy steel in high temperature water environment were investigated. Overall, weld metal showed similar crack growth rate as that of base metal. At 0.01 Hz, fatigue crack growth rate (FCGR) was higher than that in air while the difference was smaller at 0.1 Hz. Also, FCGR showed ${\Delta}K$ dependency at 0.1 Hz only, indicating that the environmental effect was much greater at slower loading frequency of 0.01 Hz. FCGR of SA508 Gr.3 Cl.2 low alloy steel was compatible to or smaller than the ASME Sec. XI fatigue reference curves in high temperature water environment.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.13-18
• /
• 2004

High-.ate in-situ$ YBa_2$Cu$Cu_3$$O_{7-x}$ (YBCO) film growth was demonstrated by means of the electron beam co-evaporation. Even though our oxygen pressure is low, ∼$5 ${\times}$10^{-5}$ Torr, we can synthesize as-grown superconducting YBCO films at a deposition rate of around 10 nm/s. Relatively high temperatures of around 90$0^{\circ}C$ was necessary in this process so far, and it suggests that this temperature at a given oxygen activity allows a Ba-Cu-O liquid formation along with an YBCO epitaxy. Local critical current density shows a clear correlation with local resistivity. Homogeneous transport properties with a large critical current density ($4 ∼ 5 MA/\textrm{cm}^2$ at 77K, 0T) are observed in top faulted region while it is found that the bottom part carries little supercurrent with a large local resistivity. Therefore, it is possible that thickness dependence of critical current density is closely related with a topological variation of good superconducting paths and/or grains in the film bodies. The information derived from it may be useful in the characterization and optimization of superconducting films for electrical power and other applications.

• 천문학회보
• /
• 제38권2호
• /
• pp.57.1-57.1
• /
• 2013

We investigate the method to measure both the present value of the matter energy density contrast and the Hubble parameter directly from the measurement of the linear growth rate which is obtained from the large scale structure of the Universe. From this method, one can obtain the value of the nuisance cosmological parameter $\Omo$ (the present value of the matter energy density contrast) within 3% error if the growth rate measurement can be reached $z >3.5$. One can also investigate the evolution of the Hubble parameter without any prior on the value of $H_0$ (the current value of the Hubble parameter). Especially, estimating the Hubble parameter are insensitive to the errors on the measurement of the normalized growth rate $f \sigma_8$. However, this method requires the high $z$ ($z >3.5$) measurement of the growth rate in order to get the less than 5% errors on the measurements of $H(z)$ at $z \leq 1.2$ with the redshift bin $\Delta z = 0.2$. Thus, this will be suitable for the next generation large scale structure galaxy surveys like WFMOS and LSST.

• KSBB Journal
• /
• 제4권1호
• /
• pp.31-33
• /
• 1989

하이브리도마의 회분식 배양에서 세포증식 속도가 기질의 소비 속도나 단일클론 항체의 생산에 미치는 영향을 조사하였다. 세포의 증식속도를 조절하는 방법으로는 다음 3가지를 이용하여다. 1)배양액내 혈청의 농도를 낮추는 방법, 2) 배양온도를 낮추는 방법, 3)세포증식 억제제를 첨가하는 방법, 실험결과에 따르면 위의 세가지 방법에 의해 세포증식 속도가 20~50% 감소하는 동안 기질의 소비속도와 암모니아의 생성 속도는 40%까지 감소하였다. 반면에 단일클론 항체의 최종농도는 하이브리도마 세포의 증식이 저해되지 않았을 경우데 비해 100%까지 증가하는 것으로 나타났다. 따라서 이 결과는 하이브리도마 배양에서 단일크론 항체 생산의 증가에 유용한 방법으로 이용 될 수 있다.

• 한국어병학회지
• /
• 제15권1호
• /
• pp.37-42
• /
• 2002

Effect of mercury (Hg) toxicity on survival, growth, feed efficiency and oxygen consumption were examined in the juvenile olive flounder. Paralichthys olivaceus. Fishes were exposed to sublethal concentrations of Hg ranging from 0 to 0.13mg/L for 6 weeks. Hg reduced survival rate in a concentration and exposure period-dependent way and suddenly reduction occurred at Hg concentrations greater than 0.05mg/L after 6 weeks. Growth rate and feed efficiency also significantly decreased at greater than 0.028 and 0.05 mg/L respectively. Oxygen consumption rate was significantly decreased to 25 and 32% than that of the control at the Hg concentration of 0.05 and 0.13 mg/L respectively. These results suggest that Hg toxicity inhibit physiological function including growth, feed efficiency and oxygen consumption in the juvenile olive flounder, resulting in survival failure at high concentration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권10호
• /
• pp.1388-1393
• /
• 2000

The present study was conducted to examine the feasibility of utilising bamboo (Bambusa arundinacea) shoot shell (BSS) in ruminants. Chemical composition, rumen degradability and some antinutritional compounds were determined for fresh and boiled BSSs to evaluate its feed value and safety. Thirty-two Holstein heifers were allocated to four groups and used to investigate the response in growth rate to supplementing ammoniated rice straw with fresh shell (phase 1) or silage of boiled BSS (phase 2). All animals were offered ammoniated straw ad libitum with 1kg of cotton seed meal (phase 1) or 0.5 kg of cotton seed meal and 0.5 kg of concentrate mixture (phase 2) per head per day. The BSS was supplemented at levels of 0, 3, 6 or 9 kg/d (phase 1) and 0, 5, 10 or 15 kg/d (phase 2) (as fed basis). The BSS was very high in moisture content, and its contents of crude protein and neutral detergent fiber were 13~16% DM and 65~76% DM, respectively; boiling resulting in higher moisture and protein. No hydrocyanic acid was detected in both BSSs and content of tannins was negligible. Rumen degradability of BSS was reasonably high, and with boiling the rapidly degradable fraction decreased, and potentially degradable component increased. Silage of the boiled BSS was slightly lower in both rapidly and slowly degraded fractions than the fresh BSS. Animals consumed all supplemented BSSs without any adverse health problems. Intake of ammoniated straw decreased with the increasing levels of BSS, but total intake was higher in almost all supplementary groups than in the non-BSS. Heifers had a higher growth rate in phase 1 with fresh BSS than in phase 2 with ensiled shell, and daily weight gains were 622, 629, 744 or 690 g in phase 1, and 578, 575, 677 or 635 g in phase 2 at four BSS levels, respectively. For both phases growth rate was significantly higher for the animals in groups 3 and 4 than those in groups 1 and 2 (p<0.01), with little difference between groups 1 and 2 (p>0.05) but significant difference between groups 3 and 4 (p<0.05). Supplementation with BSS also resulted in an improved feed conversion rate, with the least concentrate consumption in group 3 for both phases. It is concluded that the BSS has a high potential nutritional value as indicated by its medium protein content, reasonably high rumen degradability, and that inclusion of BSS in ammoniated rice straw diet is not only safe to animals, but also may improve growth rate of ruminants and feed conversion rate. It may be disadvantageous to use high amounts of BSS in ammoniated straw diets.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.837-842
• /
• 2007

This study was conducted to test the effect of residual Al on plankton community after dissolved air flotation (DAF) application. Growth rate of phytoplankton after DAF application ($0.37day^{-1}$) was about 2 times lower than that before DAF application ($0.70day^{-1}$). Under the condition of addition of nitrogen and phosphorus without light, growth rate phytoplankton in treatment without residual Al increased in difference with showing the negative growth rate in treatment with residual Al. Under the condition of light without addition of nutrient, growth rate of phytoplankton was no noticeable difference between the before and after DAF application. The relatively high settling rate (0.47 m/day) was observed in treatment after DAF application. Although the abundance of rotifer decreased, the abundance of copepod and cladoceran such as Daphnia galeata, Diaphanosoma sp. and Bosmina longirostris with relative higher grazing was no noticeable difference between the before and after DAF application. In the treatments before and after DAF application with zooplankton, growth rate of phytoplankton was $0.41{\pm}0.08day^{-1}$, $0.20{\pm}0.03day^{-1}$, respectively. This difference was in treatment after DAF application similar with those in treatments before and after DAF application without zooplankton. Those indicate that the filter-feeding effect of zooplankton on phytoplankton community may be not changed by residual Al after the DAF application. These results suggest that residual Al after DAF application be to improve water quality by inhibition of growth rate as well as increasing settling rate of phytoplankton.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.501-506
• /
• 2001

The creep crack growth properties in 3.5NiCrMoV steel were investigated at $550^{\circ}C$ by using CT specimen under constant $C_t$ condition that was held during crack growth of 1mm distance. $C_t$ lely on load line displacement rate and $C^*$ usually increase with crack length though load is reduced in order to maintain constant $C_t$ value as crack growth. Fully coalesced area(FCA) ahead of crack tip tend to increase as $C_t$ increase to the critical value, and after that value FCA decrease. For the tertiary creep stage of crack growth test, the most of displacement is due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of $C_t$. At constant load and $C_t$ region, crack growth slope was 0.900 and 0.844 each, on the other hand $C^*$ slope was 0.480.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.78-78
• /
• 2012

In this presentation I will review the expanding thermal plasma chemical vapour deposition (ETP-CVD) technology, a deposition technology capable of reaching ultrahigh deposition rates. High rate deposition of a-Si:H, ${\mu}c$-Si:H, a-SiNx:H and silicon nanocrystals will be discussed and their various applications, mainly for photovoltaic applications demonstrated. An important aspect over the years has been the fundamental investigation of the growth mechanism of these films. The various in situ (plasma) and thin film diagnostics, such as Langmuir probes, retarding field analyzer, (appearance potential) mass spectrometry and cavity ring absorption spectroscopy, spectroscopic ellipsometry to name a few, which were successfully applied to measure radical and ion density, their temperature and kinetic energy and their reactivity with the growth surface. The insights gained in the growth mechanism provided routes to novel applications of the ETP-CVD technology, such as the ultrahigh high growth rate of silicon nanorystals and surface passivation of c-Si surfaces.