• 한국전기화학회:학술대회논문집
• /
• 2005.07a
• /
• pp.201-206
• /
• 2005

본 연구는 기 개발 완료된 천연가스차량용 200bar급 Type 3 복합재 압력용기를 개발로 축척된 핵심요소기술과 실질적인 경험을 바탕으로 수소연료전지 차량에 탑재할 350bar급 Type 3 복합재 압력용기에 대한 설계/해석과 시험평가의 핵심적인 사항을 고찰하였다. 설계/해석에는 350bar급 Type 3 복합재 압력용기에 대한 3차원 비선형 유한요소 모델링 및 해석기법이 제시되었고, 설계된 라이너형상과 와인딩 패턴을 이용하여 필라멘트 와인딩 공법으로 1차시제품을 제작하였다. 제작된 시제품에 대하여 파열시험 및 반복피로시험을 수행하여 설계/해석 기법의 타당성을 검증하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.609-614
• /
• 2005

Gas hydrates are ice-l ike sol id compounds that are composed of water and natural gas. All common gas hydrates belong to the three crystal structures that are composed of five polyhedral cavities formed by hydrogen bonded water molecules and stable in specific high pressure and low temperature conditions. Gas hydrates contain large amounts of organic carbon and widely occur in deep oceans and permafrost regions, and they may therefore represent a potential energy resource in the future. United States and Japan perform the national R&D programs for the commercial production of gas hydrates in 2010's. The study on gas hydrates are also important for exploration and development of natural gas in the regions where gas hydrates are accumulated and could be formed. Although their global abundance is debated, they play an important role in global climate change since methane is a 50 times more effect ive greenhouse gas than carbon dioxide. Natural gas hydrates also form a possible natural hazard if rapidly dissociated and can cause slides and slumps and in the marine environment associated tsunamis.

• Mass Spectrometry Letters
• /
• v.3 no.4
• /
• pp.108-111
• /
• 2012

An experimental study on the nascent product of the OH heterogeneous reaction with NaCl was performed under dry and wet conditions using a bead-filled flow tube system coupled to a high-pressure chemical ionization mass spectrometer. The ozone concentration in the flow tube for the atomic hydrogen removal was varied in order to control the conversion reaction of molecular chlorine into HCl for the identification of the nascent product. The mass spectrometric observation was that the $O_3$ introduction reduced the concentration HCl, while it increased the concentration of $Cl_2$ and ClO. Based on the experimental results, we suggest that the nascent product of the titled reaction is gaseous $Cl_2$, which is followed by fast conversion into HCl in presence of H. No significant difference in the concentration profile between under dry and wet (RH = 2%) conditions was observed.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2034-2040
• /
• 2007

Efficient catalytic systems, where Ni or Pd is introduced in a supporting material of nanoporous carbon, have been developed for a liquid-phase hydrogenation of carboxylic acids and ketones at room temperature. It has been found that the catalysts reliably show high activities and selectivities for the hydrogenation to alcohols even in acidic conditions, and the catalytic activities depend on the preparative method of catalysts, the hydrogen pressure, the agitation rate, and the catalytic species. The hydrogenation of carboxylic acids and ketones clearly shows that the reaction rate is affected by the electronic and the steric effects, and a plausible reaction mechanism using metal hydrides as catalytic species is proposed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.255-260
• /
• 1998

Behavior of solid phase crystallizations (SPC) of RF sputtered and LPCVD amorphous hydrogenated silicon film were investigated. LPCVD films showed the higher degree of crystallinity and larger grain size than sputtered films. The applicable degree of crystallinity was also obtained from sputtered films. The deposition method of amorphous silicon film influenced the behavior of post annealing SPC. Observed degree of crystallinity of sputtered films strongly depended on the partial pressure of hydrogen in deposition. The higher deposition temperature of sputtering provided the better crystallinity after SPC. Due to the high degree of poly-crystallinity, the retardation of larger grain growth was observed on sputtering film.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.676-680
• /
• 1992

Irradiation of N-t-butyl-N-chloro-3-phenylpropanesulfonamide (1a) in benzene at $20^{\circ}C$ using 450 W high pressure mercury arc lamp in the presence of oxygen affored N-t-butyl-3-phenylpropanesulfonamide (2), N-t-butyl-3-chloro-3-phenylpropanesulfonamide (3), and N-t-butyl-3-oxo-3-phenylpropanesulfonamide (4). Similarly, N-t-butyl-4- (5), N-t-butyl-4-chloro-4- (6), and N-t-butyl-4-phenylbutanesulfonamides (7) were obtained from N-t-butyl-N-chloro-4-phenylbutanesulfonamide (1b). However, irradiation of N-t-butyl-N-chloro-5-phenylpentanesulfonamide (1c) under the same conditions gave complex mixtures. These results indicate that sulfonamidyl radical generated from each of 1a and 1b can abstract intramolecularly a hydrogen atom from the benzylic position only by forming six and seven-membered transition states, respectively.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3961-3968
• /
• 2024

The Korea Atomic Energy Research Institute (KAERI) is developing a novel Two-Region Arc Plasma Ion Source (TRAP) as a negative hydrogen (deuterium) ion source for a Neutral Beam Injection (NBI) system in a fusion tokamak. The TRAP ion source is based on a two-region configuration, comprising a high energy electron region that creates highly vibrationally excited molecules and a low electron temperature region that generates negative ions by attaching electrons to molecules. This configuration can be achieved by optimizing the filament position and magnetic cusp field. In order to optimize the TRAP configuration, the plasma parameters are investigated under various operating conditions, such as filament position, gas pressure, and arc power. Electron density and temperature are determined using Langmuir probe measurements. In this paper, the detailed experimental results are described and discussed.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.36-43
• /
• 2024

Fishing net waste (FNW) constitutes over half of all marine plastic waste and is a major contributor to the degradation of marine ecosystems. While current treatment options for FNW include incineration, landfilling, and mechanical recycling, these methods often result in low-value products and pollutant emissions. Importantly, FNWs, comprised of plastic polymers, can be converted into valuable resources like syngas and pyrolysis oil through pyrolysis. Thus, this study presents a process for generating high-purity hydrogen (H₂) by catalytically pyrolyzing FNW in a CO₂ environment. The proposed process comprises of three stages: First, the pretreated FNW undergoes Ni/SiO₂ catalytic pyrolysis under CO₂ conditions to produce syngas and pyrolysis oil. Second, the produced pyrolysis oil is incinerated and repurposed as an energy source for the pyrolysis reaction. Lastly, the syngas is transformed into high-purity H₂ via the Water-Gas-Shift (WGS) reaction and Pressure Swing Adsorption (PSA). This study compares the results of the proposed process with those of traditional pyrolysis conducted under N₂ conditions. Simulation results show that pyrolyzing 500 kg/h of FNW produced 2.933 kmol/h of high-purity H₂ under N₂ conditions and 3.605 kmol/h of high-purity H₂ under CO₂ conditions. Furthermore, pyrolysis under CO₂ conditions improved CO production, increasing H₂ output. Additionally, the CO₂ emissions were reduced by 89.8% compared to N₂ conditions due to the capture and utilization of CO₂ released during the process. Therefore, the proposed process under CO₂ conditions can efficiently recycle FNW and generate eco-friendly hydrogen product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.442-442
• /
• 2008

Hydrogen was produced by water plasma excited in very high frequency inductively coupled tube reactor. Mass spectrometry was used to monitor gas phase species at various process conditions. Water dissociation rate depend on the process parameters such as ICP power, flow-rate and pressure. Water dissociation percent in ICP reactor decrease with increase of chamber pressure and $H_2O$ flow rate, while increase with increase of ICP power. In our experimental range, maximum water dissociation rate was 65.5% at the process conditions of 265 mTorr, 68 sccm, and 400 Watt. The effect of $CH_4$ addition to a water plasma on the hydrogen production has been studied in a VHF ICP reactor. With the addition of $CH_4$ gas, $H_2$ production increases to 12% until the $CH_4$ flow rate increases up to 15 sccm. But, with the flow rate of $CH_4$ more than 20 sccm, chamber wall was deposited with carbon film because of deficiency of oxygen in gas phase, hydrogen production rate decreased. The main roles of $CH_4$ gas are to reacts with O forming CO, CHO and $CO_2$ and releasing additional $H_2$ and furthermore to prevent reverse reaction for forming $H_2O$ from $H_2$ and $O_2$. But, $CH_4$ addition has negative effects such as cost increase and $CO_x$ emission, therefore process optimization is required.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.274-285
• /
• 2001

In this study, the thermal desorption-cryofocusing-gas chromatographic(TD-C-GC) method was developed for determination of volatile organic compounds(VOCs) in ambient air and was applied at the municipal solid waste landfill sites. On-column cryofocusing was possible only with a 100 ml dewars bottle in TD-C-GC method with a stainless steel column. However, high operating pressure was needed for purging VOCs from the absorbent trap, which was able to solve by pressure programming with a electric pressure controller. By using both pressure and temperature programming brought increasing of resolution power in on-column cryofocusing method, but the high pressure caused a leakage of sample tube with repeated use. A loop cryofocusing devise was also developed and compared with the direct on-column method. In loop cryofocusing method, VOCs were concentrated on a 0.8mm i.d. loop which is located between the injector and separation column by using liquid nitrogen. In order to purge VOCs from the absorbent trap, only 0.4 psi of pressure was need in the loop cryofocusing method. Dual detection system was applied for the analysis of VOCs; a FID was used for hydrocarbons and a FPD was used for sulfur-containing compounds. Qualitative analysis was done by on-column cryofocusing GC-MS system. Among the large number of VOCs, toluene was the most abundant. Hydrogen sulfide, dimethyl sulfide, carbon disulfide, dimethyl disulfide and methyl propyl disulfide were detected at landfill site by FPD.