• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.374-375
• /
• 2015

현대인들은 잘못된 자세와 버릇으로 인하여 근골격계 구조의 변형이 발생하고 지속적인 비정상 자세의 경우 근골격계 질환으로 발전되어 일상생활에 불편함을 가져다 준다. 근골격계질환은 피로감, 통증, 감각마비, 경련의 증상으로 시작되어 움직임장애, 기능저하, 기형등으로 발전된다. 본 논문에서는 좌식 생활에서 발생되는 비정상 자세와 버릇을 무구속, 무자각적인 방법으로 판단할 수 있는 시스템을 구현하였다. 착석부에 8개의 압력센서를 배치하여 체중의 분포를 통하여 자세를 판단하였으며 일생생활 중 많이 발생하는 1가지의 정상 자세와 8종류의 비정상 자세 판단할 수 있었다. 구현된 시스템의 성능 평가를 위해 자세 판단 실험을 진행하였으며, 그 결과 97%의 높은 성능을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.906-909
• /
• 2006

The secondary electron emission coefficient $({\gamma})$ of the cathode is an important factor for improving the discharge characteristics of AC-PDPs because of its close relationship to discharge voltage. In AC-PDPs, MgO is most widely used as a surface protective layer. In this experimental, we have investigated the electronic structure of the energy band structure of the MgO layer responsible for the high ${\gamma}$. The MgO layers have been deposited by electron beam evaporation method, where the $O_2$ partial pressures have been varied as 0, $5.2{\times}10^{-5}$ torr, $1.0{\times}10^{-4}$ torr, and $4.1{\times}10^{-4}$ torr, in this experiment. It is noted that work function that is energy gap between surface and first defect level of MgO layer has the lowest value for the highest O2 partial pressure of $4.1^{\ast}10^{-4}$ Torr.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.787-790
• /
• 2003

A rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of $E{\times}B$ field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• 전기전자학회논문지
• /
• 제14권3호
• /
• pp.244-249
• /
• 2010

수중의 미립자 계수를 위한 Line-CCD를 이용한 수중광학 시스템을 구현하였다. 미립자 계수 측정을 위하여 680nm Laser diode를 광원으로 사용하였다. 광학시스템을 동작확인을 위해 수중 인공탱크 및 해양에서 실험을 하였다. 시스템의 상 하강 운동 시, 마이크로프로세서(FPGA)의 신호 전달(센서의 신호검출)을 통하여 미립자 계수를 알 수 있다. 시스템의 알고리즘은 또한, 깊이에 따른 압력, 온도, 계수 값을 실시간으로 분석한다. 실험을-통해 광학센서 시스템의 높은 정확도를 보여주었다. 따라서, Line-CCD를 통한 실시간 측정 가능한 수중광학 시스템을 제안 하였다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1650-1658
• /
• 2001

An electret filter is composed of permanently charged electret fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the fractional collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using highly monodisperse particles ranging from 0.02 to 0.6 $\mu\textrm{m}$ in diameter at three different charging states: singly charged, uncharged, and equilibrium charged. The face velocity was varied from 2.4 to 20.4 crus. It was fecund that the fractional efficiency curve fur singly charged particles shows a typical trend that the collection efficiency is minimum at about 0.3 $\mu\textrm{m}$ in diameter. The fractional efficiency of equilibrium charged particles were not severely varied with the particle diameter. The collection efficiency curve fur uncharged particles has a minimum near 0.1 $\mu\textrm{m}$ in diameter. Another experiment was conducted for a cartridge filter to examine the effect of charge depletion on the collection efficiency in a cabin air filter. The result shows that the charge depletion of the cartridge filter can significantly lower the collection efficiency.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.247-255
• /
• 2016

본 논문에서는 핀틀 추력기의 비정상상태 특성을 파악하기 위하여 구동기의 속도를 측정하였으며, 정상상태 실험을 통해 비정상상태 실험 시스템을 구성하였다. 비정상상태 실험은 총 3 가지의 구동 속도(3.01 mm/s, 5.65 mm/s, 10.83 mm/s)를 이용하여 진행하였다. 그 결과 핀틀이 후진하는 경우가 전진하는 경우보다 더 빨리 명령 압력 값에 수렴하였으며, 이는 핀틀이 후진하는 경우가 연소실의 압력이 높은 상태로 형성되어 있기 때문이다. 핀틀이 전 후진하는 경우에 추력 곡선에 특이점들이 나타났으며, 이는 연소실 압력과 노즐 목 면적 변화에 기인하여 나타난 질유량 변화로 인한 것이다. 구동 속도가 빠를수록 이러한 현상이 뚜렷하게 나타났다.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.43-50
• /
• 2006

The objective of the present study is to induct the regression equation for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer. As a result of our study, the hardness of filter was increased with increasing the plasticizer content and packing density as major factors affecting to the filter hardness. As a result which was obtained by the three dimensional response surface methodology in STATISTIC A program, the hardness prediction value well fitted with experiment result on the high plasticizer content. To make up for the this equation, the new modified fraction of solid factors which was contained the mono denier factor was introduced to the hardness prediction equation, and this third regression equation which was sufficient for the wide plasticizer content, was obtained by the three dimensional response surface methodology in STATISTICA. This results indicated that the third regression equation which was obtained this study was applicable for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer.

• Journal of Chest Surgery
• /
• 제22권2호
• /
• pp.179-190
• /
• 1989

The experimental study for extracorporeal preservation of the heart-lung preparation by autoperfusion system was performed in 10 dogs. Under intravenous Pentothal endotracheal anesthesia bilateral thoracotomies were performed. A 24F cannula connected to a plastic reservoir bag located 100 cm above the level of the heart was introduced into the aortic arch. Left subclavian, innominate artery, and descending aorta were ligated and divided. Both vena cavae were ligated and divided after the bag was half filled with blood. A 24F catheter inserted into right atrium and connected to the plastic bag in order to keep constant the preload. The thoracic trachea was intubated and the lungs were ventilated. The heart-lung preparations were removed en bloc and floated in a $34^{\circ}C$ bath of Hartmann solution. The preparations were observed for from 2 hours to 8 hours, with the average of 5.2 hours. Hemodynamic and hematologic variables were measured during preharvest and autoperfusion. The pH revealed severe respiratory alkalosis due to very low $PaCO_2$ during autoperfusion ; $PaO_2$ remained constant for 130-140 mmHg; $A-aDO_2$ increased markedly. The static inspiratory pressure [SIP] at late autoperfusion [6hr] increased significantly as compared with at early autoperfusion [2hr]. There was no difference between white blood cell counts from right atrium and those of left atrium. Heart rates remained constant for 110-120/min; cardiac outputs maintained to approximately 0.6L/min; mean aortic pressures, 75 mmHg; mean pulmonary arterial pressures, 15-18 mmHg; mean right atrial pressures, 9-13 mmHg; mean left atrial pressures, 12 mmHg lower than those of right atrium. Serum Na maintained with normal range during autoperfusion; K increased significantly; Ca decreased progressively. Hemoglobin and hematocrit decreased significantly during autoperfusion. The study demonstrated that stable hemodynamics could be maintained throughout the experiment and the preparation of the lung seemed to be inadequate, especially after 3-4 hours, such as high $A-aDO_2$, increased SIP, and scattered atelectasis and edema in their gross appearances.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• 동의생리병리학회지
• /
• 제19권6호
• /
• pp.1622-1628
• /
• 2005

This study was undertaken to define the effect of SoPung-Tang extract on hypertension in spontaneous hypertensive rat and norepinephrine- induced arterial contraction in rabbit. In order to investigate the effect of SoPung-Tang extract on contracted rabbit carotid arterial strips, transverse strips with intact or damaged endothelium were used for the experiment using organ bath. To analyze the mechanism of SoPung-Tang extract-induced relaxation, SoPung-Tang extract infused into contracted arterial strips induced by norepinephrine after treatment of indomethacin, Nu-nitro-L-arginine, methylene blue or tetraethylammonium chloride. Blood pressure was significantly decreased five days after administration of SoPung-Tang extract. SoPung-Tang extract relax arterial strip with endothelium contracted by norepinephrine, but in the strips without endothelium, SoPung-Tang extract- induced relaxation was significantly inhibited. SoPung-Tang relax arterial strip contracted by norepinephrine, but in the strips contracted by high $K^+$, SoPung-Tang extract-induced relaxation was significantly inhibited. The endothelium-dependent relaxation induced by SoPung-Tang extract was decreased by the pre-treatment of $N{\omega}$-nitro-L-arginine or methylene blue, but it was not observed in the strips pre-treated with indomethacin or tetraethylammonium chloride. When $Ca^{2+}$ was applied, the strips which were contracted by norepinephrine in a $Ca^{2+}$-free solution, arterial contraction was increased. But pre-treatment of SoPung-Tang extract inhibited contractile response to $Ca^{2+}$. We suggest that SoPung-Tang could be applied effectively for hypertension and may suppress influx of extra-cellular $Ca^{2+}$ through the formation of nitric oxide in the vascular endothelial cells.