• Title/Summary/Keyword: High-order filters

Search Result 211, Processing Time 0.025 seconds

High-Performance VLSI Architecture Using Distributed Arithmetic for Higher-Order FIR Filters with Complex Coefficients

  • Tsunekawa, Yoshitaka;Nozaki, Takeshi;Tayama, Norio
    • Proceedings of the IEEK Conference
    • /
    • 2002.07b
    • /
    • pp.856-859
    • /
    • 2002
  • This paper proposes a high-performance VLSl architecture using distributed arithmetic for higher-order FIR filters with complex coefficients. For the purpose of realizing high sampling rate with small latency in high-order filters, we apply distributed arithmetic[1]. Moreover, in order to decrease drastically the power dissipation, the structure applying not ROM's but optimum function circuits which we have previously proposed, is utilized[2][3]. However, this structure increases in the number of adders as compared to the conventional structure applying ROM's. In order to realize a more effective method for further higher-order filter, we propose newly an implementation applying two methods which have large effects on the unit using the adders. First , we propose an implementation applying SFAs(Serial Full Adders) and SFSs(Serial Full Subtractors). Second, we propose a structure applying proposed 4-2 adders. Finally, it is shown that the proposed architecture is an effective way to realize low power dissipation and small latency while the sampling rate is kept constant for further higher-order filters with complex coefficients.

  • PDF

2.5 GHZ SECOND-AND FOURTH-ORDER INDUCTORLESS RF BANDPASS FILTERS

  • Thanachayanont, Apinunt
    • Proceedings of the IEEK Conference
    • /
    • 2002.07a
    • /
    • pp.86-89
    • /
    • 2002
  • A new design approach for realising low-power low-voltage high-Q high-order RE bandpass filter is proposed. Based on the gyrator-C inductor topology, a 2$\^$nd/-order biquadratic bandpass filter can be realised by adding a series capacitor to the input port of the gyrator. High-Q 2$\^$nd/-order and 4$\^$th/-order fully differential RF bandpass filters operating in the 2.4-㎓ ISM (Industrial, scientific and medical) frequency band under a 2-V single power supply voltage with low power dissipation are reported.

  • PDF

Fabrication of 14 GHz Hairpin Type YBCO Filters

  • Song, Seok-Cheon;Kim, Cheol-Su;Lee, Sang-Yeol;Yoon, Hyung-Kuk;Yoon, Young-Joong
    • 한국초전도학회:학술대회논문집
    • /
    • v.9
    • /
    • pp.138-141
    • /
    • 1999
  • For the enhancement of communication system performance, high quality filters are required. Conventional metal filters made of copper can be substituted by high quality high temperature superconductivity(HIS) flms for better performance. In order to reduce the size of the filter for the integration of device in the limited area, we have fabricated hairpin type filters using pulsed laser deposition(PLD) technique. The superconducting YBCO thin films have been grown on MgO substrates by PLD with Nd:YAC laser. The YBCO films were patterned by conventional wet-etching process. We have compared YBCO filters and copper filters which were made with the same spec. Simulated and measured frequency responses reveal that HIS YBCO hairpin type bandpass filters show better performance than copper filters.

  • PDF

A New Approach to the Maximum Dynamic Range of the High Order Band-Pass and Band-Reject Elliptic Filters (고차 대역통과 및 대역저지 타원 필터의 최대 동적구역을 실현하기 위한 새로운 접근법)

  • 박민식;이문호;김동용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.10 no.5
    • /
    • pp.250-257
    • /
    • 1985
  • High order filters are usually realized by cascading second order stages. In this paper, a simple method of pole-zero pairing in the high order band-pass and band-reject filter realization of the elliptic functions is proposed for the enhancement of overall dynamic range. Futrhermore, the optimum sequence of the various biquads of high-pass notch, low-pass notch and symmetrical notch etc., is developed for the elliptic band-pass and band-reject filters.

  • PDF

A Study on the Noise Removal Performance of SAMED Filters (SAMED 필터의 잡음제거 성능에 대한 연구)

  • Song, Jong-Kwan
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.7 no.6
    • /
    • pp.1309-1314
    • /
    • 2012
  • The SAMED filter is introduced as a wide class of multi-stage filters which encompass linear FIR and nonlinear order statistic filters. The output of SAMED filter is linear combination of sub-median outputs. In this paper, optimal SAMED filter is designed for images corrupted by various noise, and performance is analogized. The experimental result shows that the efficiency of each order of SAMED filters is depends on type of noise. It is shown that low order filters are effective in Gaussian environments but high order filters are effective in impulsive case. This result may be used to follow-up research on successive SAMED filters.

Design of FPGA Adaptive Filter for ECG Signal Preprocessing (FPGA를 이용한 심전도 전처리용 적응필터 설계)

  • 한상돈;전대근;이경중;윤형로
    • Journal of Biomedical Engineering Research
    • /
    • v.22 no.3
    • /
    • pp.285-291
    • /
    • 2001
  • In this paper, we designed two preprocessing adaptive filter - high pass filter and notch filter - using FPGA. For minimizing the calculation load of multi-channel and high-resolution ECG system, we utilize FPGA rather than digital signal processing chip. To implement the designed filters in FPGA, we utilize FPGA design tool(Altera corporation, MAX-PLUS II) and CSE database as test data. In order to evaluate the performance in terms of processing time, we compared the designed filters with the digital filters implemented by ADSP21061(Analog Devices). As a result, the filters implemented by FPGA showed better performance than the filters based on ADSP21061. As a consequence of examination, we conclude that FPGA is a useful solution in multi-channel and high-resolution signal processing.

  • PDF

Reconfigurable FIR Filter for Dynamic Variation of Filter Order and Filter Coefficients

  • Meher, Pramod Kumar;Park, Sang Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.16 no.3
    • /
    • pp.261-273
    • /
    • 2016
  • Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

Displacements, damage measures and response spectra obtained from a synthetic accelerogram processed by causal and acausal Butterworth filters

  • Gundes Bakir, Pelin;Richard, J. Vaccaro
    • Structural Engineering and Mechanics
    • /
    • v.23 no.4
    • /
    • pp.409-430
    • /
    • 2006
  • The aim of this study is to investigate the reliability of strong motion records processed by causal and acausal Butterworth filters in comparison to the results obtained from a synthetic accelerogram. For this purpose, the fault parallel component of the Bolu record of the Duzce earthquake is modeled with a sum of exponentially damped sinusoidal components. Noise-free velocities and displacements are then obtained by analytically integrating the synthetic acceleration model. The analytical velocity and displacement signals are used as a standard with which to judge the validity of the signals obtained by filtering with causal and acausal filters and numerically integrating the acceleration model. The results show that the acausal filters are clearly preferable to the causal filters due to the fact that the response spectra obtained from the acausal filters match the spectra obtained from the simulated accelerogram better than that obtained by causal filters. The response spectra are independent from the order of the filters and from the method of integration (whether analytical integration after a spline fit to the synthetic accelerogram or the trapezoidal rule). The response spectra are sensitive to the chosen corner frequency of both the causal and the acausal filters and also to the inclusion of the pads. Accurate prediction of the static residual displacement (SRD) is very important for structures traversing faults in the near-fault regions. The greatest adverse effect of the high pass filters is their removal of the SRD. However, the noise-free displacements obtained by double integrating the synthetic accelerogram analytically preserve the SRD. It is thus apparent that conventional high pass filters should not be used for processing near-fault strong-motion records although they can be reliably used for far-fault records if applied acausally. The ground motion parameters such as ARIAS intensity, HUSID plots, Housner spectral intensity and the duration of strong-motion are found to be insensitive to the causality of filters.

A Design of Digital Filter IC Using a Semi-Custom Design Method (Semi-Custom 방식을 이용한 통신용 디지탈 필터의 집적회로 설계)

  • Lee, Kwang-Youb;Kim, Bong-Ryul;Lee, Moon-Key
    • Proceedings of the KIEE Conference
    • /
    • 1987.07b
    • /
    • pp.850-853
    • /
    • 1987
  • A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

  • PDF

Low-voltage current-mode filters using complementary current mirrors (상보형 전류미러를 이용한 저전압 전류모드 필터의 설계)

  • 안정철;최석우;윤창훈
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.34C no.11
    • /
    • pp.56-65
    • /
    • 1997
  • In this paper, a design of current-mode continuous-time filters for low voltage and high frequency applictions using complementary bipolar current mirror paris is presented. The proposed current-mode filters consist of simple bipolar current mirrors and capacitors and are quite suitable for monolithic integrtion. Since the design method of the proposed curent-mode filters is based on the integrator type of realization, it can be used for a wide range of applications. And the cutoff frequency of th efilters can be easily changed by the DC cntrolling current. As design examples, the 5th order butterworth filters are designed by cascade and leapfrog methods with tunable cutoff frequencies from 30MHz to 100MHz. The characteristics of the designed current mode filters are simulated and examined by SPICE using standard bipolar transistor parameters.

  • PDF