• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.105-114
• /
• 2017

Two dimensional finite element method with quadrilateral basis functions was applied to the spherical high order filter on the spherical surface limited area domain. The basis function consists of four shape functions which are defined on separate four grid boxes sharing the same gridpoint. With the basis functions, the first order derivative was expressed as an algebraic equation associated with nine point stencil. As the theory depicts, the convergence rate of the error for the spherical Laplacian operator was found to be fourth order, while it was the second order for the spherical Laplacian operator. The accuracy of the new high order filter was shown to be almost the same as those of Fourier finite element high order filter. The two-dimension finite element high order filter was incorporated in the weather research and forecasting (WRF) model as a hyper viscosity. The effect of the high order filter was compared with the built-in viscosity scheme of the WRF model. It was revealed that the high order filter performed better than the built in viscosity scheme did in providing a sharper cutoff of small scale disturbances without affecting the large scale field. Simulation of the tropical cyclone track and intensity with the high order filter showed a forecast performance comparable to the built in viscosity scheme. However, the predicted amount and spatial distribution of the rainfall for the simulation with the high order filter was closer to the observed values than the case of built in viscosity scheme.

• Journal of the Korean earth science society
• /
• v.36 no.5
• /
• pp.476-483
• /
• 2015

The high-order Laplacian-type filter, which is capable of providing isotropic and sharp cut-off filtering on the spherical domain, is essential in processing geophysical data. In this study, a spherical high-order filter was designed by combining the Fourier method with finite difference-method in the longitude and latitude, respectively. The regular grid system was employed in the filter, which has uniform angular spacing including the poles. The singularity at poles was eliminated by incorporating variable transforms and continuity-matching boundary conditions across poles. The high-order filter was assessed using the Rossby-Haurwitz wave, the observed geopotential, and observed wind field. The performance of the filter was found comparable to the filter based on the Galerkin procedure. The filter, employing the finite difference method, can be designed to give any target order of accuracy, which is an important advantage being unavailable in other methods. The computational complexity is represented with 2n-1 diagonal matrices solver with n being the target order of accuracy. Along with the availability of arbitrary target-order, it is also advantageous that the filter can adopt the reduced grid to increase computational efficiency.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.259-261
• /
• 1996

In this paper, active input filter for power factor correction(PFC) circuit employing ripple arrent and voltage cancellation is proposed to reduce filter's size and cost, and to make filter design easy. Switching ripple current and voltage can be sensed through the secondary windings of filter inductor. Single stage passive filter can achieve high order filter characteristics by using active ripple current and voltage cancellation technique. Conventional high order passive filter and its problems are suggested. Analysis of active filter and design procedure are detailed. Simulation result is presented to verify high order filter characteristics of proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.28-36
• /
• 2011

As Power Line has been already installed over 60% of a residential area all over the world, Broadband Service has been possible using high-speed PLC(Power Line Communication) without new access line installed for Internet access. Because of such reason, PLC is researched as the most suitable service for Last Mile Solution. But, Power Line is designed for transmitting electric power, so peripheral Wireless Communication System is affected by a leak of electric wave. In this paper, we propose a High Performance Notch Filter algorithm in comparison with a existing notch filter for reduction of interference between existing Wireless Communication Service and Power Line Service. In addition, we implement the Notch Filter emulator appling a High Performance Notch Filter and using a embedded board.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.171-173
• /
• 2000

In this paper, we present a new interpolation method for the color filter away(CFA). In order to capture color images. typical input devices use a single chip CCD imaging sensor with color filter array. As a result, the single chip CCD does not provide sufficient color resolutions since it arranges different color filters sequentially on a single CCD, resulting in aliasing noise and loss of resolution. In order to reconstruct high quality color images, we propose to use the interpolation algorithm using high order B-splines. Experiments show promising results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.145-147
• /
• 2017

Tracking filter plays a key role in accurate estimation and prediction of maneuvering vessel's dynamics. The third-order ${\alpha}-{\beta}-{\gamma}$ filter is one of the special cases of the general solution provided by the Kalman filter. Fading memory algorithm performs a better performance in numerous of ${\alpha}-{\beta}-{\gamma}$ filter algorithms. This study aims to optimize the fourth-order fading memory algorithm ${\alpha}-{\beta}-{\gamma}-{\eta}$ filter, which is extended form ${\alpha}-{\beta}-{\gamma}$ filter, to get much more accurate position of high dynamic target on the condition that the own ship is also high dynamic.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.56-62
• /
• 2003

The WENO filter is presented for unsteady flow analysis. The filter is low dissipative and dispersive. The results using the present WENO filter show more accurate resolution than those using other filters. The numerical analyses for several test cases are performed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.86-89
• /
• 2002

A new design approach for realising low-power low-voltage high-Q high-order RE bandpass filter is proposed. Based on the gyrator-C inductor topology, a 2$\^$nd/-order biquadratic bandpass filter can be realised by adding a series capacitor to the input port of the gyrator. High-Q 2$\^$nd/-order and 4$\^$th/-order fully differential RF bandpass filters operating in the 2.4-㎓ ISM (Industrial, scientific and medical) frequency band under a 2-V single power supply voltage with low power dissipation are reported.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.1-7
• /
• 2015

In this paper, we propose a second-order fiber flexible comb filter based on a polarization-diversity loop(PDL). The proposed filter consists of a polarization beam splitter, four half-wave plates(HWPs), and three high birefringence fiber(HBF) segments. In the previous Solc-type second-order filter based on the PDL, HBF segments were fusion-spliced with a fixed angle offset between their principal axes with each other. But, the proposed filter implemented by inserting two HWPs between three HBF segments has a great flexibility in adjusting relative angular difference between the principal axes of two adjacent HBF segments. Owing to this flexibility, second-order transmission spectra, which had a channel spacing of ~0.8nm, could be interleaved by controlling the orientation angles of four HWPs. The output transmission spectra of the proposed filter were theoretically analyzed and experimentally verified.