• Journal of The Korean Association For Science Education
• /
• v.26 no.7
• /
• pp.805-812
• /
• 2006

In this study the description patterns of chemistry textbooks on the boiling point elevation phenomenon and the understanding patterns of high school students, pre-service teachers and chemistry teachers were investigated. High school chemistry II textbooks developed in the 6th and 7th national curricula were analyzed and the conception patterns of subjects on this phenomenon were categorized using a questionnaire developed for this study. The description patterns of science textbooks were classified into three: 'decreasing of surface solvent molecules', 'attraction force between solvent and solute molecules' and 'decreasing of surface solvent molecules and attraction force between solvent and solute molecules'. In the result of the conception analysis, the ratio of 'attraction force between solvent and solute molecules' was high among students, pre-service teachers, and chemistry teachers. There was a propensity that they would like to explain the boiling point elevation in terms of enthalpy rather than entropy, and in order to analyze this propensity, follow-up interviews were carried out.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.119-126
• /
• 2016

In this study, we separated the lignin from the wood by using the high boiling point solvent for developing more environmental friendly pulping method. High boiling point solvents as Ethers, glycols and ketones were used to remove the lignin in the pine wood meals. The Yield and lignin content of residual wood meals was reduced according to the input of the catalyst. Me-C, E-Ca, TEG and MIBK had the best delignification rate of 9 kinds of high-boiling point solvents. At the hydrolysis ratio of the selected solvents, The TEG was highest remain ratio of carbohydrates and the E-Ca was lowest remain ratio of lignin. And the Me-C was most excellent lignin hydrolysis ratio at the low catalyst. The selectivity of delignification of Me-C, E-Ca, TEG and MIBK solvents were 49.6, 49.9, 53.8 and 53.1%, respectively, and its values were similar to those of the commercial Kraft Pulp.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.992-998
• /
• 2009

We investigated the influence of organic solvents on the droplet properties of 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS-pentacene), which was used for semiconductor of organic thin film transistors (OTFTs) and deposited by ink jet printing. From the result of the investigation, the conditions of a suitable solvent is that boiling point should be above $200^{\circ}C$ to reduce coffee stain and the surface tension above 32 dyn/cm to decrease the droplet size. Consequently, we selected tetralin which have a high boiling point ($207^{\circ}C$) and high surface tension (34.3 dyn/cm) as the solvent for TIPS-pentacene, and applied it to OTFTs. In fabrication process the conventional bank process employing photolithography and etching process was replaced by ink jet printed bank process, resulting in simplifying the process. Especially, polyvinylphenol was used for the bank, and the high hydrophobicity could improve the confinement of TIPS molecules inside the bank, enhancing the performance over the conventional hydrophilic polyvinylalcohol bank. The mobility was $0.18\;cm^2/Vs$, current on/off ratio $2.09{\times}10^5$, subthreshold slope 0.42 V/dec, and off state current $0.049\;pA/{\mu}m$.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.8-12
• /
• 2015

As NMP (N-Methyl-2pyrrolidone) is becoming important in many fields, the demand for it is also rising rapidly. With its chemical property of high boiling point, low vapor pressure and high water solubility, it is easy to recover it after processing. Therefore, it is increasingly needed to develop a system that effectively recovers NMP solvent. The study produced a system modeling using AMESim software before developing high purity solvent recovery (HPSR) system to recover NMP solvent. Then, it verified reliability by comparing the simulation model with the test result.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.164-164
• /
• 2014

Characteristics of electrolyte are those; electrical stability, ion conductivity, viscosity, high temperature work, cell application. Theoretically, GBL has high oxidation voltage. Also, boiling point of GBL is $206^{\circ}C$ and flash point is over $280^{\circ}C$.

• Clean Technology
• /
• v.24 no.1
• /
• pp.15-20
• /
• 2018

Hexafluoropropyleneoxide ($C_3F_6O$, HFPO) is highly expensive and it may be used as a raw material for the synthesis of various fluorine based compounds. Currently, extractive distillation method has gained considerable attention to collect the HFPO from a mixture of HFPO / hexafluoropropylene ($C_3F_6$, HFP). Optimized operating conditions are studied using a theoretical method for the extraction process. Among available solvents for the purification process, the use of 1,1-dichloro-1-fluoroethane exhibits a high purity of HFPO as a top product and minimize the required heat duty. Since the boiling point of the solvent increases as the pressure in the column increases, the enhanced extractive capability of the solvent led to the high purity of HFPO at the high pressure.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.255-264
• /
• 1989

The minimum concentrations of organic solvents inducing phytotoxicity were investigated after spraying or flooding solvent solutions to annual plants. In the foliar treatment of upland test, solvents with high-boiling point or low-polarity induced severe phytotoxicity. Especially, aromatic solvents induced severe phytotoxicity. The most sensitive plant to phytotoxicity was soybean. In the pre-emergence treatment of upland test, the solvents with high-boiling point only induced phytotoxicity at high concentration. The degree of phytotoxicity induced by foliar spray in the condition of paddy field was similiar to that of upland test, but in the pre-emergence test, the former was more severe than the latter. Among 6 treatments, phytotoxicity induced by solvents was most severe in the pre-emergence test under the condition of flooding paddy field. Generally, alcohols induced severe phytotoxicity, especially, ethanol at 0.001%.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1712-1713
• /
• 2011

Inkjet technology have many merits in plenty of industrial applications. However, deposited droplet has a very critical issue that is coffee ring effect, for the application to an industrial manufacturing process. To remove the coffee ring effect, the effect of thermal treatment conditions on shapes of inkjet printed silver patterns were investigated in various surface condition. The surface changes were characterized by the contact angle measurement. Droplets from a 50 ${\mu}m$ nozzle were printed on the substrate after optimizing the ejection of individual droplets. Ink with a high boiling point of main solvent results in coffee ring effect. This result implies that the dominant factor that determines the shape of droplet is the drying conditions of main solvent of silver nanoparticle colloidal ink. As a results, selecting a proper thermal treatment conditions is very crucial for better shapes of inkjet printed silver nanoparticle colloidal patterns.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1523_1524
• /
• 2009

Inkjet technology has various merits as a direct patterning process in plenty of industrial applications, but critical issue such as coffee ring effect should be overcome for the application to an industrial manufacturing process. In this paper, we introduced the morphological analysis of inkjet printed pattrerns on the characristics of inks and substrates. In case of Triethlene Glycol Monoethly Ether based ink, the coffee ring effect was observed. However, an ethanol based ink showed the round shaped morphology under the same printing conditions and surface conditions. An ink consisted of the solvent with high boiling point results in coffee ring effect. This experimental results showed that the morphological change of the printed droplet is caused by the main solvent of ink, rather than the metal content, viscosity and surface tension.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.117-123
• /
• 2013

Dimethyl ether (DME) has a high cetane number that is suitable for diesel fuel. DME does not contain sulfur or nitrogen, and is an oxygenated fuel so it produces no particulate matter when combusted and is environmentally friendly. DME fuel for diesel engines show excellent material properties such as a lower volumetric heating value, lower boiling point, lower lubricity, and stronger solvent effect than light oil. This study experimentally examined a lubricity improver (LI) for dimethyl ether. A diesel LI based on biodiesel and fatty acid methyl ester was tested among DME LI candidates. The long-term storage stability and physical properties of the optimum LI for DME were determined.