• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.33-35
• /
• 1994

In Linear Induction Motor(LIM), the end effect is caused by the abrupt change in the airgap magnetic reluctance at both ends of the machina Especially, in high speed, it has an adverse effect on various characteristics of LIM such as thrust, efficiency, power factor, etc. In this paper, we analyze the end effect, and describes the method to reduce end effect essentially and decrease the secondary material cost.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.36-40
• /
• 1998

Tool shop of the‘D’Motor Co.(DMC) fabricates dies for producing automotive press panels. In order to increase the production capacity of the tool shop, DMC established an FMS that consists of high-speed machines and a CMM at the tool shop in 1997. Due to the difference in machine capability among the existing machines and the new FMS it is needed to find an optimal way of allocating workloads among machines to maximize the production. In a way to solve this, we model the die fabrication process of the tool shop and analyze its performance by computer simulation. In this study, we at first identify the bottleneck processes of the die fabrication process under the current operation policy. Then, we derive some alternative operating policies applicable to the tool shop, and analyze the optimal operation policy by comparing the performance of the tool shop following each alternative policy.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2023-2026
• /
• 2002

This paper explains the study of controller design applied to SRM(Switched Reluctance Motor) concept. This controller executes controller algorithms via ${\mu}$-processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal. During initial period, SRM controller was designed to control .respective target RPM (Revolution per minutes) and PR (Proportional Integral Differential) coming from the PC(Personal Computer) monitor program, and receiving clockwise and counter-clockwise rotation signal and target RPM coming from the front panel, and receiving the location of rotational element and RPM generating from the position censor during activation period.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.51.2-51.2
• /
• 2014

CQUEAN(Camera for QUasars in EArly uNiverse) has been used at the 2.1 m Otto Struve Telescope of the McDonald Observatory since 2010. This camera is optimized at 0.7 - 1.1 um for the survey of Lyman break of high redshift (z > 5) quasars in the early universe. The current system has a filter wheel consist of seven (g', r', I', z', Y, Iz and Is) broad-band filters. We are upgrading this filter wheel to have 20 narrow band filters, with which we can take spectral energy distributions of targets. The new filter wheel consists of interchangeable cartridges for 50 mm square filters, a speed reducer unit, and a step motor. This new design of the large size filter wheel can be applied to other large format CCD cameras.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.49-51
• /
• 2005

The single phase switched reluctance motor(SRM) has many merits in practical appliance because it has simple operating drive and control system, very high energy density per unit volume comparing with three phase SRM. But it has also problems to need a starting device and to generate the torque ripple. One of the major problems is a torque ripple which causes increased undesirable acoustic noise and speed ripple. This paper describes an approach to determine a rotor type to minimize the torque ripple.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.159-166
• /
• 2003

The winding insulation of low-voltage induction motors in adjustable-speed drive system with voltage-fed Inverters is substantially stressed due to the uneven voltage distribution and excessive voltage stress (dv/dt), which result in the premature insulation breakdown In this paper, the detailed insulation test results of 26 low-voltage induction motors are presented. Six different types of insulation techniques are applied to 26 motors. The insulation characteristics are analyzed with partial discharge, discharge inception voltage, AC current, and dissipation factor tests Also, insulation breakdown tests by high voltage pulses are performed, and the corresponding breakdown voltages obtained.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.394-395
• /
• 2018

본 논문에서는, 직류단 1-션트 전류 측정을 이용하는 고속 BLDC 전동기 운전 시스템의 제어 성능 향상 및 전류 측정 영역 확장을 위한 제어 방법을 제안한다. 고속 BLDC 전동기의 PWM 기법과 그에 따른 직류단 1-션트 전류 측정 방법 및 측정 영역을 분석하고, 측정 가능 범위를 수식적으로 정리한다. 제안된 제어 방법은 전류 맥동 감소 및 고속 운전 정밀도 향상에 적합한 PWM 기법과 직류단 1-션트 전류 측정 범위가 넓은 PWM 기법을, 정리된 수식을 바탕으로 운전 영역에 따라 사용하여 제어 성능을 향상 시킨다. 계산 데이터 및 실험 결과를 통해 제안된 방법의 효용성을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1000-1002
• /
• 2000

SRM(Swithed Reluctance Motor)은 회전자 위치와 동기 되어 여자 되어야 한다. 이러한 토오크 발생기구의 특성상 회전자 위치각에 대한 정보가 필수적이다. 회전자 위치각의 검출은 일반적으로 엔코더나 레졸버를 사용하나, 본 연구에서는 저 분해능 엔코더를 사용한 경우에도 고정도의 온, 오프 스위칭. 각을 제어하기 위해서 미소각 예측 및 미래 지향적 스위칭각도 제어기법을 제안하였다. 또한 이를 프로토 타입으로 구현하기 위해서 89C196의 HSO(High speed output) 기능을 사용하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1039-1041
• /
• 2000

To obtain a high performance in a vector controlled induction machine, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantages with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.257-259
• /
• 1998

The Switched Reluctance Motor (SRM) has good properties to the adjustable speed control. But, high torque ripple and noise decrease this merit and make unstable state. Also, because of the saturation in the magnetic circuit, it is difficult to predict the inductance profile. If the inductance pronto is known, it's possible to make flat-top torque by applying some control strategy. This paper suggests method to develope flat-top torque using a Artificial Neural Network(ANN) method that can calculate a nonlinear inductance profile.