• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2355-2364
• /
• 1998

In conventional fractal decoding procedure, the reconstructed image is obtained by a rpredefined number of iterations starting with an arbitrary initial image. Its convergence speed depends on the selection of the initial image. It should be solved to get high speed convergence. In this paper, we theoretically reveal that conventional method is approximately decomposed into the decoding of the DC and AC components. Based on this fact, we proposed a novel fast fractal decoding algorithm made up of two steps. The averaged-image considered as an optimal initial image is estimated in the first step. In the second step, the reconstructe dimag eis genrated from the output image obtained in the first step. From the simulations, it is shown that the output image of the first step approximately converges to the averaged-image with only 15% calculations for one iteration of conventional method. And the proposed method is faster than various decoding mehtods and evenly equal to conventioanl decoding with the averaged-image. In addition, the proposed method can be applied to the compressed data resulted from the various encoding methods because it does not impose any constraints in the encoding procedure to get high decoding speed.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.168-172
• /
• 2009

Recently, while 3D sports game increases, the research that it recognizes the operation of the real user actively progresses. Most of all, the research about the golf is active. In this paper, the image acquiring in a high-speed CCD camera measures the flight data of the golf ball through the image processing. While photographing, the high-speed camera, using this system, exposes an image at regular intervals. And line scan camera checks whether the golf ball passed or not. After the location information of the calculated golf ball calculates a speed and a direction by using the physical formula, it applies the golf simulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.1 no.1
• /
• pp.79-88
• /
• 2002

High speed machining system have been used in industrial because it is effective to a material manufacturing with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. Therefore this study proposed to decide best manufacturing cutting condition for surface roughness and rapid manufacturing tune by using computer Image processing system and 3D modelling. Until the 16,000 rpm, the surface roughness is decreased rapidly, but it is not over that. The 22,000 rpm is the spindle speed with the optimum surface in the high speed end-milling. In the case of the feed rate with 2,000 mm/mm and 8,000 mm/mm, the surface roughness is better than 4,000 mm/min and 6,000 mm/min. By using the 3D modelling, it is effectively represented shape characteristics of working surface m high speed end-milling.

• Proceedings of the IEEK Conference
• /
• 2000.11c
• /
• pp.145-148
• /
• 2000

This paper proposes a character segmentation method for Korean letter address image. The poor quality of image binarization results in broken character strokes. To overcome this problem, two steps of processing ate introduced. The first one is to merge broken characters to generate character candidates, and the other one is to reduce the complexity of segmentation graph path. These two steps do not use recognition information to keep in high-speed.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.835-836
• /
• 2006

For non-contact structure vibration displacement measurement system, an algorithm for image processing using high speed CCD camera is introduced. The system sets the target to the structure, take picture using camera and image processing is performed to display the vibration data. The algorithm flow is basic preprocessing, projection data generation and curve fitting to find three crossing points for calibration or one center point in limited area.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1935-1936
• /
• 2008

본 논문은 High speed image를 획득하기 위하여 CMOS Image Sensor를 사용한 고속카메라 구현에 관한 연구이다. Image Sensor로는 CCD Image Sensor와 CMOS Image Sensor가 있으며 CMOS Image Sensor는 CCD Image Sensor에 비해 전력소모가 적고 주변회로의 내장으로 소형화 할 수 있는 장점이 있다. 고속카메라는 충돌 테스트, 에어벡 제어 등의 자동차 분야와 골프 자세 교정 장치와 같은 스포츠 분야, 탄도 방향 측정 장비 등의 국방 분야 등 여러 분야에 많이 사용되고 있다. 본 논문에서 구현한 고속카메라 시스템은 CMOS Image Sensor를 사용하여 1280 * 1024의 해상도로 초당 약 500 frames의 영상을 획득할 수 있다. 또한 CMOS Image Sensor를 제어하고 획득한 이미지를 저장할 수 있도록 FPGA와 DDR2 메모리를 사용하고 저장된 데이터를 PC로 전송하기 위한 Camera Link 모듈 그리고 PC에서 카메라를 제어할 수 있도록 RS-422 통신기능 등으로 구성되었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.817-818
• /
• 2010

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.699-707
• /
• 2009

Recently, while 3D sports game increases, the research that it recognizes the operation of the real user actively progresses. Most of all, the research about the golf is active. In this paper, the camera acquiring in a high-speed multi-exposure image measures the flight data of the golf ball through the image processing. While photographing, the high-speed camera, using this system, exposes an image at regular intervals. And line scan camera checks whether the golf ball passed or not. After the location information of the calculated golf ball calculates a speed and a direction by using the physical formula, it applies the golf simulation. After, this system is possible the measurement of the physical element of the spherical object.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.7-17
• /
• 2001

The purpose of this paper is to develop automatic incident detection algorithm using image based detector in freeway management system. This algorithm was developed by using neutral network for high speed roadway and by using speed and occupancy variable for low speed roadway. The image detector system with the developed automatic incident detection algorithm can detect multi-lane as well as several detect areas for each lane. To evaluate this system, field tests to measure the detecting rate of incidents were performed with other systems which have APID and DES algorithm at high speed roadway(freeway) and low speed roadway(national arterial). As the results of field test, it found that the detect rate of this system was highest rate comparing to other two systems.