• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.967-971
• /
• 2004

The switched reluctance drive is known to provide good adjustable speed characteristics with high efficiency. However, higher torque ripple and lack of the precise speed control are drawbacks. In the paper, a PLL(Phase Locked Loop) technique is adopted to regulate the dwell angle instantaneously. A PLL control technique in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. The F240 DSP based control system is used to realize this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.62-71
• /
• 2002

This paper presents new DSP (Digital Signal Processor) instructions and their hardware architecture for high-speed FFT. the instructions perform new operation flows, which are different from the MAC (Multiply and Accumulate) operation on which existing DSP chips heavily depend. The proposed DPU (Data Processing Unit) supporting the instructions shows two times faster than existing DSP chips for FFT. The architecture has been modeled by the Verilog HDL and logic synthesis has been performed using the 0.35 ${\mu}m$ standard cell library. The maximum operating clock frequency is about 144.5 MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.827-830
• /
• 2011

In this paper, a wind speed & direction module and the DSP(Digital Signal Processor) sensor interface circuit board are proposed. This DSP system accepts and process the informations from a wind speed & direction module, the atmospheric pressure sensor, the ambient air temperature sensor and transfers it to the PC monitering system. Especially, a wind speed & direction module and a DSP hardware are directly designed and applied. A wind speed & direction module have a construction that it have four film type RTD(Resistive Temperature Detectors) or film type Piezo sensors adhered around the circular metal body for obtaining vector informations about wind. By this structure, the module is enabled precise measurement having a robustness about vibration, humidity, corrosion. A sensor signal processing circuit is using TMS320F2812 TI(Texas Instrument) Corporation high speed DSP.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.32-39
• /
• 1999

Digital signal processor (DSP) is used to obtain the peak value and the time difference of ultrasonic signals, to make digital filter, and to derive mathematical transformation from analog circuit. In this study, C-scan system and control program have been developed to high speed data acquisition. This system consists of signal processing parts (DSP, oscilloscope, pulser/receiver, digitizer), scanner, and control program. The developed system has been applied to a practical ultrasonic testing in overlay weld, and demonstrated high speed with precision

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2000

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response and motion control characteristic results, and high performance features in general purposed 2.2[kW] machine. The system can be adapted variform motor drive system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.377-381
• /
• 1999

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response characteristic results and high performance features. The system can be adapted variform motor drive system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.480-483
• /
• 1997

A fossil power plant can be modeled by a lot of algebraic equations and differential equations. When we simulate a large, complicated fossil power plant by a computer such as workstation or PC, it takes much time until overall equations are completely calculated. Therefore, new processing systems which have high computing speed is ultimately needed to develope real-time simulators. Vital points of real-time simulators are accuracy, computing speed, and deadline observing. In this paper, we present a enhanced strategy in which we can provide powerful computing power by parallel processing of DSP processors with communication links. We designed general purpose DSP modules, and a VME interface module. Because the DSP module is designed for general purpose, we can easily expand the parallel system by just connecting new DSP modules to the system. Additionally we propose methods about downloading programs, initial data to each DSP module via VME bus, DPRAM and processing sequences about computing and updating values between DSP modules and CPU30 board when the simulator is working.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.12-17
• /
• 2008

In this paper, the 128bit AES block cipher algorithm OCB (Offset Code Book) mode for privacy and authenticity of high speed packet data was efficiently designed in C language level and was optimized to support the required capacity of contents server using high performance DSP. It is known that OCB mode is about two times faster than CBC-MAC mode. As an experimental result, the encryption / decryption speed of the implemented block cipher was 308Mbps, 311 Mbps respectively at 1GHz clock speed, which is 50% faster than a general design with 3.5% more memory usage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.885-890
• /
• 2002

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently the study of turbo compressor applied super high speed motor and drive, removing gearbox made its size small and mechanical friction loss minimum. In this study we tried to develope variable super high speed motor controller, compressor controller and MMI controller under one DSP based systems for 1500Hp, 70,000rpm direct drive Turbo compressor. It have to do unitification of each controller"s hardware and software. The result of study is applied to a 150Hp direct turbo compressor and makes it goods.oods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.167-169
• /
• 2001

In this paper, a controller design for high speed and stiffness linear motor is implemented. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for high speed and stiffness linear motor.