• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.33-40
• /
• 2009

본 논문에서는 HAI(Hybrid Artificial Intelligent) 제어기반의 SV PWM 방식을 이용한 IPMSM의 고성능 제어를 제시한다. HAI 제어기는 적응 퍼지제어 및 신경회로망의 장점을 혼합 적용한다. SV PWM 방식은 지금까지 산업용 전동기 제어분야에 적용되고 있고 출력전류의 고조파 비율, 스위칭 주파수 및 응답특성을 향상시키는 수 있는 기법이다. HAI 제어기는 지령전압을 계산할 때 발생되는 문제점을 해결하기 위하여 종래의 PI 제어기를 대체하여 사용한다. HAI 제어기는 지령모델 기반의 적응제어, 퍼지제어 및 신경회로망으로 구성되어 속도 성능을 개선한다. 본 논문에서는 제시한 HAI 제어기를 적용하여 파라미터 변동, 정상상태 및 과도상태 등의 응답특성을 분석하고 종래의 FNN 제어기 및 PI 제어기의 응답특성과 비교한다. 따라서 본 논문에서는 HAI 제어기의 타당성을 입증한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5605-5623
• /
• 2016

We propose a face recognition method that utilizes the LCP face descriptor. The proposed method applies a LoG mask to extract a face contour response, and employs the LCP algorithm to produce a binary pattern representation that ensures high recognition performance even under the changes in illumination, noise, and aging. The proposed LCP algorithm produces excellent noise reduction and efficiency in removing unnecessary information from the face by extracting a face contour response using the LoG mask, whose behavior is similar to the human eye. Majority of reported algorithms search for face contour response information. On the other hand, our proposed LCP algorithm produces results expressing major facial information by applying the threshold to the search area with only 8 bits. However, the LCP algorithm produces results that express major facial information with only 8-bits by applying a threshold value to the search area. Therefore, compared to previous approaches, the LCP algorithm maintains a consistent accuracy under varying circumstances, and produces a high face recognition rate with a relatively small feature vector. The test results indicate that the LCP algorithm produces a higher facial recognition rate than the rate of human visual's recognition capability, and outperforms the existing methods.

• 한국공간구조학회논문집
• /
• 제11권2호
• /
• pp.81-88
• /
• 2011

구조물에 대한 진동제어 기술은 지금까지 일반 라멘구조물을 대상으로 하여 많은 연구가 이루어져 왔다. 공간구조물은 일반 라멘구조물과는 다른 동적응답특성을 가지고 있기 때문에 일반 라멘구조물을 대상을 개발된 진동제어 기술을 공간구조물에 적용시키기에는 불확실한 요소가 존재하게 된다. 본 논문은 대공간구조물 중에서 자중이 비교적 커서 지진응답이 크게 나타나는 트러스 형태의 아치 구조물을 대상으로 하여 수동형 TMD 설치 위치 및 질량비에 따른 제어성능을 분석하였다. 예제 아치구조물의 TMD 설치 위치에 따른 진동응답 분석결과, 모드벡터가 가장 큰 위지에 TMD를 설치하는 것이 가장 제어성능이 우수한 것으로 나타났다. 또한 TMD 의 질량비 변화에 따른 진동응답 분석결과, 질량비가 약 2%인 경우에 가장 효율적인 것을 확인 할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.308-313
• /
• 2008

This article proposes the study and simulation of an RST regulator based on a double fed induction machine. The RST polynomial controller can improve the double fed induction machine performance in terms of overshoot, rapidity, cancellation of disturbance, and capacity to maintain a high level of performance. A control law is synthesized using an RST controller. Simulation results indicate that the proposed regulator has better performance response to speed variation, sensitivity to perturbation, and robustness. The designed control algorithm is tested on a simulation matlab code.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.269-272
• /
• 1988

This paper introduces a method to reduce the reactive power required by electronic converters. The instantaeous reactive power is calculated and compensated by the current controlled PWH voltage source converter connected parallel between the power lines and the converter. A high performance current control technique which is based on the current deviation vector is used for the PWM converter as compensator of reactive power. Accurate compensation of the reactive power and t control system ensuring fast response to the sudden change of loaf are attained. The converter structure and control scheme are discussed. Simulation of the system is performed.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.713-718
• /
• 2011

This paper presents an online voltage disturbance estimator to achieve precise torque control of IPMSMs over a high speed operating region. The proposed design has a type of state-filter based on a Luenburger-style closed loop stator current vector observer. Utilizing the frequency response plot (FRF) approach, the estimation accuracy and the parameter sensitivities are analyzed. Accurate torque control and improved efficiency are provided with the decoupling of the effect of the parameter variations. The feasibility of the presented idea is verified by laboratory experiments.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.184-193
• /
• 2014

This paper presents a high performance ZPE(zero-phase-error) speed controller for PMSM(permanent magnet synchronous motor) drives. A comparison study between conventional general purpose speed controller in modern industry fields such as PI, IP and 2-degree of freedom controller presented also. The proposed ZPE speed controller is found suitable for vector controlled PMSM drives in giving the high level of performance while maintaining the excellent response at the time of speed command changing. In MATLAB-based comparative simulation and experiment results with commercial drive system, the proposed method shows a superior control performance compared with the conventional speed controller widely-used.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.542-552
• /
• 2016

Central 60° synchronous modulation is an easy pulse-width modulation (PWM) method to implement for the traction inverters of urban rail trains at a very low switching frequency. Unfortunately, its switching patterns are determined by a Fourier analysis of assumed steady-state voltages. As a result, its transient responses are not very good with over-currents and high instantaneous torque pulses. In the proposed solution, the switching patterns of the conventional central 60° modulation are modified according to the dynamic error between the target and actual stator flux. Then, the specific trajectory of the stator flux and current vector can be guaranteed, which leads to better system transients. In addition, stator flux control is introduced to get smooth mode switching between the central 60° modulation and the other PWMs in this paper. A detailed flow chart of the control signal transmission is given. The target flux is obtained by an integral of the target voltage. The actual PMSM flux is estimated by a minimum order flux state observer based on the extended flux model. Based on a two-level inverter model, improved rules in the α-β stationary coordinate system and equations of the switching patterns amendment are proposed. The proposed method is verified by simulation and experimental results.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.129-141
• /
• 2005

A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.951-954
• /
• 2005

본 논문은 BLCD 모터를 사용하여 복합연막탄 선회구동 장치를 정밀 제어하는 시스템 설계 및 알고리즘 개발을 그 목적으로 하고 있다. 복합연막탄은 적위협의 시계를 가리는 역할을 하므로 매우 짧은 시간 내에 적 위협을 감지하고 그에 대응해야 하므로 빠른 응답성을 갖도록 설계 되어야 한다. 따라서 300Hz ${\sim}$ 500Hz의 빠른 전류 응답성을 가지는 전류 제어기를 설계하였으며 기존에 많이 사용되던 공간벡터 PWM을 사용하지 않고 MIX-MAX PWM 방식을 사용하여 연산속도를 향상 시켰다. 연막탄이 정확히 발사되기 위한 정밀 위치제어기를 제안하였으며 PC기반의 모니터링 프로그램을 통해 전류, 전압, 위치, 속도 등의 파라메터를 그래프로 확인 가능하도록 구현하였다. 부동소숫점 방식의 고속 DSP인 TMS320VC33을 사용하여 제어기를 구성 하였으며 PWM발생부는 CPLD인 EPM7128을 사용하여 구현 하였다.