• Journal of Communications and Networks
• /
• 제16권2호
• /
• pp.121-129
• /
• 2014

The trend of an increasing demand for a high-quality user experience, coupled with a shortage of radio resources, has necessitated more advanced wireless techniques to cooperatively achieve the required quality-of-experience enhancement. In this study, we investigate the critical problem of rate splitting in heterogeneous cellular networks, where concurrent transmission, for instance, the coordinated multipoint transmission and reception of LTE-A systems, shows promise for improvement of network-wide capacity and the user experience. Unlike most current studies, which only deal with spectral efficiency enhancement, we implement an optimal rate splitting strategy to improve both spectral efficiency and energy efficiency by exploring and exploiting cooperation diversity. First, we introduce the motivation for our proposed algorithm, and then employ the typical cooperative bargaining game to formulate the problem. Next, we derive the best response function by analyzing the dual problem of the defined primal problem. The existence and uniqueness of the proposed cooperative bargaining equilibrium are proved, and more importantly, a distributed algorithm is designed to approach the optimal unique solution under mild conditions. Finally, numerical results show a performance improvement for our proposed distributed cooperative rate splitting algorithm.

• 한국음향학회지
• /
• 제21권7호
• /
• pp.606-613
• /
• 2002

본 논문에서는 수중에서 송신 빔 형성기를 이용한 고속 데이터 전송 기법을 연구하였다. 또한 범용 디지털 신호처리 프로세서와 다수의 디지탈-아날로그 변환기를 이용한 시험용 송신단을 설계 및 구현하였으며, 구현된 시스템을 이용하여 수조에서 실험을 수행하여 그 성능을 분석하였다. 이때 실험 과정을 단순화하기 위하여 채널 코딩 및 등화기 (equalizer) 등과 같은 과정은 생략하였고, 간장 간단한 디지털 통신 변조 기법인 OOK(On-Off keying) 기법을 사용하였다. 실험 결과 5개의 하이드로폰 송신 어레이를 사용한 경우에 1개만 사용했을 때보다 오차율 10/sup -2/을 기준으로 전송 속도가 약 3배 향상되었으며, 실험에 사용된 수조에서 음성 신호 전송을 위해 400 bps 정도까지 가능함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.192-199
• /
• 2016

With changes in insulated defects, the environment, and so on, new partial discharge (PD) data are highly different from the original samples. It leads to a decrease in on-line recognition rate. The UHF signal and pulse current signal of four kinds of typical artificial defect models in gas insulated switchgear (GIS) are obtained simultaneously by experiment. The relationship map of ultra-high frequency (UHF) cumulative energy and its corresponding apparent discharge of four kinds of typical artificial defect models are plotted. UHF cumulative energy and its corresponding apparent discharge are used as inputs. The support vector machine (SVM) incremental method is constructed. Examples show that the PD SVM incremental method based on simulated annealing (SA) effectively speeds up the data update rate and improves the adaptability of the classifier compared with the original method, in that the total sample is constituted by the old and new data. The PD SVM incremental method is a better pattern recognition technology for PD on-line monitoring.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.28-37
• /
• 2008

In this paper, we investigate the problem of minimizing the average transmission power of users while guaranteeing the average delay constraints in time-varying uplink channels. We design a scheduler that selects a user for transmission and determines the transmission rate of the selected user based on the channel and backlog information of users. Since it requires prohibitively high computation complexity to determine an optimal scheduler for multi-user systems, we propose a low-complexity scheduling scheme that can achieve near-optimal performance. In this scheme, we reduce the complexity by decomposing the multiuser problem into multiple individual user problems. We arrange the probability of selecting each user such that it can be determined only by the information of the corresponding user and then optimize the transmission rate of each user independently. We solve the user problem by using a dynamic programming approach and analyze the upper and lower bounds of average transmission power and average delay, respectively. In addition, we investigate the effects of the user selection algorithm on the performance for different channel models. We show that a channel-adaptive user selection algorithm can improve the energy efficiency under uncorrelated channels but the gain is obtainable only for loose delay requirements in the case of correlated channels. Based on this, we propose a user selection algorithm that adapts itself to both the channel condition and the backlog level, which turns out to be energy-efficient over wide range of delay requirement regardless of the channel model.

• ETRI Journal
• /
• 제31권5호
• /
• pp.489-499
• /
• 2009

This paper focuses on assessment and design of transmission systems for distribution of digital signals over standard Category-7A copper cables at speeds beyond 10 Gbps. The main contribution of this paper is on the technical feasibility and system design for data rates of 40 Gbps and 100 Gbps over copper. Based on capacity analysis and rate optimization algorithms, system parameters are obtained and the design implementation trade-offs are discussed. Our simulation results confirm that with the aid of a decision-feedback equalizer and powerful coding techniques, namely, TCM or LDPC code, 40 Gbps transmission is feasible over 50 m of CAT-7A copper cable. These results also indicate that 100 Gbps transmission can be achieved over 15 m cables.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1048-1063
• /
• 2020

In this study, we propose a reinforcement learning agent to control the data transmission rates of nodes in carrier sensing multiple access with collision avoidance (CSMA/CA)-based wireless networks. We design a reinforcement learning (RL) agent, based on Q-learning. The agent learns the environment using the timeout events of packets, which are locally available in data sending nodes. The agent selects actions to control the data transmission rates of nodes that adjust the modulation and coding scheme (MCS) levels of the data packets to utilize the available bandwidth in dynamically changing channel conditions effectively. We use the ns3-gym framework to simulate RL and investigate the effects of the parameters of Q-learning on the performance of the RL agent. The simulation results indicate that the proposed RL agent adequately adjusts the MCS levels according to the changes in the network, and achieves a high throughput comparable to those of the existing data transmission rate adaptation schemes such as Minstrel.

• 한국정보통신학회논문지
• /
• 제25권7호
• /
• pp.923-929
• /
• 2021

TCP 통신, 패킷통신은 고품질과 고신뢰성 확보를 위해서는 전송제어 기술이 필요하다. 그러나 실시간 데이터 전송의 경우 비효율적 전송 문제가 발생한다. 이러한 문제점을 극복하여 패킷의 신뢰성 전송을 위해 일반적으로는 단순히 버퍼 수위를 지표로 하는 조기혼잡제어를 사용 하였다. 혼잡을 제어하는 시점을 버퍼 수위에 기준을 두기 때문에 혼잡제어 시점과 해지 시점의 제어가 지연된다. 따라서 본 논문에서는 버퍼 수위 지표뿐만 아니라 네트워크 혼잡을 측정하는 전송 속도와 버퍼 수위가 최적의 설정 이상 수준에 근접하도록 패킷 폐기확률을 결정하는 이상적인 버퍼 수위와 함께 분류 하였다. 제안 방법을 입증하기 위한 실험에서 설정한 이상적인 버퍼 수위에 의해 평균버퍼 수위가 유지되게 함으로 직접 제어할 수 있음을 결과로 나타내었다.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.770-781
• /
• 2016

안개 영상은 색상 정보와 경계선 정보가 줄어들기 때문에 사물의 식별에 어려움이 발생한다. 안개 제거를 위한 대표적인 알고리즘은 Dark Channel Prior(DCP)를 이용한 방식으로 안개 영상의 색상 정보를 이용하여 안개의 전달량을 추정 한 후 안개를 제거한다. 그러나 색상 정보를 바탕의 안개량 추정을 할 경우, 영상 내에 흰색 사물이나 광원과 같이 높은 밝기의 사물이 있는 영역에 대해 안개량 및 전달량을 오추정하는 문제점이 발생한다. 본 논문에서는 안개 영상의 백색 영역을 중심으로 색 정규화를 적용 한 후, 안개량 오추정 영역을 주변 안개값으로 보정하여 안개값 오추정 문제를 개선하였다. 또한 개선된 안개량 추정 결과를 바탕으로 전달량 계산 후 전달량 정련을 통해 안개 영상의 화질을 개선하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (D)
• /
• pp.136-138
• /
• 2006

The high-rate Wireless Personal Area Networks (WPANs) which IEEE 802.15.3 standard support, foster the Digital Home Network (DHN) scenarios with high rate multimedia data transmission. Actually, there are a few routing protocols for ad-hoc networks which considered the terminal location information and routing metric to reduce the energy consumption and optimize the routing path in mobile system. Based on other routing protocols, this paper presents the reliable location-based routing algorithm which is an adaptation to these networks.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.518-521
• /
• 2018

차량 내부의 다양한 전자장치를 연결하는 차량 내 통신(IVN: in-vehicle network)은 실시간성, 저잡음성, 고신뢰성, 고유연성 등이 필요하며 CAN(controller area network), CAN-FD(CAN flexible data rate), FlexRay, LIN(local interconnect network), SENT(single edge nibble transmission), PSI5(peripheral sensor interface 5) 등 다양한 기술이 있다. 본 논문에서는 이들 기술의 동작 원리에 대해 살펴보고 각 기술의 적용 대상과 장단점에 대해 설명한다.