• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.553-560
• /
• 2010

The characteristics of syngas-oxyfuel combustion has been investigated experimentally in the present study. Experimental measurements were conducted to aid a fundamental design of a syngas-oxyfuel combustor with a double coaxial burner configuration. To examine the effects of different syngas fuels on combustion characteristics, various fuel types are utilized such as commercial coal gases (Texaco, Shell), COG (cokes oven gas), and $CH_4$ as a main component of natural gas. $CO_2$ was added to the four fuel types as a diluent gas to reduce the flame temperature. The flame images and emission characteristics of NOx and CO were examined for various equivalence ratio and $CO_2$ dilution ratio. The results show that CO emission was rapidly increased as equivalence ratio approached the stoichiometry condition by reducing the amount of oxygen. As the $CO_2$ dilution increased, CO emission increased while NOx emission decreased due to reduced flame temperature. When the syngas-oxyfuel combustor is operated with 20~40% of $CO_2$ dilution ratio, the CO and NOx emission levels were kept below 50 ppm and 25 ppm, respectively, with a high concentration of $CO_2$ over 95 vol.% in exhaust gases.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.290-294
• /
• 2002

The present work describes the improvement of an erythritol-producing strain to lower the formation of glycerol, which is a characteristic by-product of the strain and could cause difficulties in the recovery and purification of the final product. The yeast-like fungi Moniliella suaveolens var. nigra, isolated previously in the same laboratory from beehives, was mutated by exposing it to a 4 g/L NTG solution. From a total of 2000 mutated strains, Em6j30-14 was selected as the one having the most desirable properties. Cultivating the strain for seven days in 300 mL flasks containing 30 mL of a 400 g/L glucose medium resulted in an erythritol yield of 43%. The glycerol yield was 5%, which is a value 50% lower as compared with the wild type. However, attempts to reproduce the above results in a 5L-fermenter failed, resulting in a similar erythritol concentration but a much higher formation of glycerol. Possible reasons for such a different behaviour could be oxygen limitation or the aggregation of cells, but the exact mechanism could not yet be identified. Foam formation, which is another major problem in large-scale fermentation, tended to be much lower for the mutant strain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.88-97
• /
• 2012

To measure the traffic pollutants with high temporal and spatial resolution under real conditions, a mobile emission laboratory (MEL) was designed. The equipment of the mini-van provides gas phase measurements of CO, NOx, CO2 and THC (Total hydrocarbon), and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and a condensation particle counter (CPC). The inlet sampling port above the bumper enables the chasing of different type of vehicles. This paper introduces the technical details of the MEL and presents data from the experiment in which a MEL chases a city bus fuelled by diesel, DME and Bio-diesel. The dilution ratio was calculated by the ratio of ambient NOx and tail-pipe NOx. Most particles from the bus fuelled by diesel were counted under 300 nm and the peak concentration of the particles was located between 30 and 60 nm. However, most particles in the exhaust of the bus fuelled by DME were nano-particles (diameter: less than 50 nm). The bus fuelled by Bio-diesel shows less particle emissions compare to diesel bus due to the presence of the oxygen in the fuel.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.443-449
• /
• 1999

Bacillus subtilis BK-17 which produces a novel protease with fibrinolytic activity was isolated from soybean paste. Bioreactor production of the enzyme was studied in order to optimize fermentation conditions such as medium concentration, pH, agitation speed, and temperature. Under most cultural conditions, enzyme production initially began when the cell growth stopped. The onset of the enzyme production was indicated by rapid increase in both dissolved oxygen (DO) and pH. Two- to three-times more concentrated medium than the flask optimum medium yielded higher enzyme production in the bioreactor fermentation. When the medium pH was controlled constant, pH 6.5 exhibited the highest activity in the range of 6.0 to 7.5, but the activity was similar to the case when the pH was initially adjusted to 7.5 and subsequently maintained within a relatively wide range of 6.4 to 7.8. Agitation speed did not affect the enzyme production with an exception of DO reaching zero. Fermentation time was reduced when temperature increased within the range of $25^{\circ}C$ to$37^{\circ}C$. However, the highest activity, along with the slow decrease of the enzymatic activity after reaching the maximum value, was observed at $25^{\circ}C$. By shifting the temperature from $37^{\circ}C$ to $25^{\circ}C$immediately after DO reached the minimum level, the high enzyme production of 1,100 U/ml along with the short fermentation period of 13 h could be obtained.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.167-177
• /
• 2016

This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.89-94
• /
• 2011

In this work, fabrication and electrochemical analysis of an individual multi-walled carbon nanotube (MWNT) electrode are carried out to confirm the applicability of electrochemical sensing. The reactive ion etching (RIE) process is performed to obtain sensitive MWNT electrodes. In order to characterize the electrochemical properties, an individual MWNT is cut by RIE under oxygen atmosphere into two segments with a small gap: one segment is applied to the working electrode and the other is used as a counter electrode. Electrical contacts are provided by nanolithography to the two MWNT electrodes. Dopamine is specially selected as an analytical molecule for electrochemical detection using the MWNT electrode. Using a quasi-Ag/AgCl reference electrode, which was fabricated by us, the nanoelectrodes are subjected to cyclic voltammetry inside a $2{\mu}L$ droplet of dopamine solution. In the experiment, RIE power is found to be a more effective parameter to cut an individual MWNT and to generate "broken" open state, which shows good electrochemical performance, at the end of the MWNT segments. It is found that the pico-molar level concentration of analytical molecules can be determined by an MWNT electrode. We believe that the MWNT electrode fabricated and treated by RIE has the potential for use in high-sensitivity electrochemical measurement and that the proposed scheme can contribute to device miniaturization.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.30-36
• /
• 1985

Water quality of seawater samples from ten stations was measured and analyzed to study the causes and the characteristics of the yellowish-green-colored zone in the Nakdong Estuary in February, May, August and October, 1984. The color of the yellowish-green-colored zone was equivalent to the grade 7 according to the Forel water-color meter and was observable throughout the year. The characteristics of the zone were low in transparency and high in the concentration of suspended solids, and about 52% of the suspended solids consisted of volatile substances. The chlorophyll a contents ranged from 0.4mg/$m^3$ to 51.0mg/$m^3$ and dissolved oxygen was in a state of supersaturation within the yellowish-green-colored zone. Nutrient concentrations were higher within the colored zone than the outside. Positive correlation was observed between tne concentrations of nutrients and chlorophyll a. Our results showed that the signficant portion of suspended solids sampled from the yellowish-green-colored zone consisted of phytoplanktons of which bloom was possibly induced by inflow of the nutrient-rich Nakdong River water.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.8
• /
• pp.438-444
• /
• 2000

We report the effects of etch process parameters on the ohmic contact formation in the plasma etching of GaN. Planar inductively coupled plasma system with $CH_4/H_2/Ar$gas chemistry has been used as etch reactor. The contact resistance and the specific contact resistance have been investigated using transfer length method as a function of RF bias power and %Ar gas concentration in total flow rate. AES(Auger electron spectroscopy) analysis revealed that the etched GaN has nonstoichiometric Ga rich surface and was contaminated by carbon and oxygen. Especially large amount of carbon was detected at the sample etched for high bias power (or voltage) condition, where severe degradation of contact resistance was occurred. We achieved the low ohmic contact of $2.4{\times}10^{-3} {\Omega}cm^2$ specific contact resistance at the input power 400 W, RF bias power 150 W, and working pressure 10mTorr with 10 sccm $CH_4$, 15 sccm H2, 5 sccm Ar gas composition.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.33-39
• /
• 2006

For the safety design and operation of many gas process, it is necessary to know certain explosion limit, flash point, auto ignition temperature and minimum oxygen concentration of handling substances. Also it is necessary to know explosion limit at high temperature and pressure. For the safe handling of propane, explosion limit and autoignition temperature of combustion characteristics for propane were investigated. By using the literatures data, the lower and upper explosion limits of propane recommended 2.0 vol% and 10.0 vol%, respectively. Also autoignition temperatures of propane with ignition sources recommended $450^{\circ}C$ at the electrically heated cruicible fumace(the whole surface heating) and recommended about $960^{\circ}C$ at the local hot surface. The new equations for predicting the temperature and the pressure dependence of the explosion limits of propane are proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.4
• /
• pp.231-235
• /
• 2009

Objective : While many factors contribute to aging, changes in calcium homeostasis and calcium related neuronal processes are likely to be important. High intracellular calcium is toxic to cells and alterations in calcium homeostasis are associated with changes in calcium-binding proteins, which confine free $Ca^{2+}$. We therefore assayed the expression of the calcium binding proteins calretinin and calbindin in the central auditory nervous system of rats. Methods : Using antibodies to calretinin and calbindin, we assayed their expression in the cochlear nucleus, superior olivary nucleus, inferior colliculus, medial geniculate body and auditory cortex of young (4 months old) and aged (24 months old) rats. Results : Calretinin and calbindin staining intensity in neurons of the cochlear nucleus was significantly higher in aged than in young rats (p<0.05) The number and staining intensity of calretinin-positive neurons in the inferior colliculus, and of calbindin-positive neurons in the superior olivary nucleus were greater in aged than in young rats (p<0.05). Conclusion : These results suggest that auditory processing is altered during aging, which may be due to increased intracellular $Ca^{2+}$ concentration, consequently leading to increased immunoreactivity toward calcium-binding proteins.