• 한국자기학회지
• /
• 제11권3호
• /
• pp.134-140
• /
• 2001

Flux-gate마그네토미터는 1930년대에 개발되어 오늘날까지 저자장측정장치로 널리 사용되고 있다. 본 연구에서는 비정질 코아를 사용하여 분해능이 우수하고 소비 전력이 적으면서 장기적 신뢰성이 우수한 Hux-gate마그네토미터를 개발하기 위하여, 교류자기 특성이 우수한 Allied Chem.사의 2714A의 열처리에 의한 센서코아의 자기적 특성변화를 측정하였다. As quenched상태로 사용한 센서코아는 센서의 noise정도가 높고 시간과 온도에 따라서 교류자기특성이 변화하였으나, 350 $^{\circ}C$에서 1시간 열처리한 시편의 경우, 센서의 noise 정도는 as quenched 상태보다 10배 정도 향상되었으며, 주파수 DC~10 Hz 범위에서 0.1 nT 정도의 noise를 보였다. 자기적특성 또한 매우 안정적인 특성을 보였으며, 시간이 경과함에 따라 최대자화력, 각형비, 보자력등이 지수함수적으로 포화치에 접근하는 경향을 보였다. 따라서 센서 설계시 이들 특성의 변화를 고려할 경우 장기적으로 매우 안정된 flux-gate마그네토미터의 개발이 가능함을 알 수 있었다.

• 한국자기학회지
• /
• 제12권6호
• /
• pp.218-223
• /
• 2002

가슨 분무법으로 제조한 High-Flux형 $Ni_{x}Fe_{100-x}$(x=40~50, wt.%) 퍼멀로이 분말 및 압분 코아의 자기적 특성을 조사하였다. 포화자화는 45%Ni조성에서 최대 값을 보이며 이보다 보 함량이 낮아지면 인바 효과의 작용에 의해 급격하게 감소하였다. 압분 코아의 투자율은 Ni 농도가 낮아지면 현저히 증가하는 바 이는 자기변형의 감소에 기인하는 것으로 사료되었으며, 자심손실은 Ni=45%에서 가장 낮은 값을 나타내었다. Ni농도가 50%에서 45%로 낮아짐에 따라 자심손실이 감소하는 주원인은 전기 비저항의 증대에 따른 와전류 손실의 감소에 있는 것으로 생각되었다. Ni=45% 분말 합금으로 만든 압분 코아는 Ni=50%의 경우보다 더 우수한 투자율의 주파수 의존성, 큰 Q 값, 그리고 더 나은 직류 바이어스 특성을 나타내어 상용 High-Flux 코아(50%Ni-50%Fe)에 비해 더 좋은 압분 자심 재료가 될 수 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.587-590
• /
• 2003

The first attention in designing a transformer for low temperature rise should be to reduce losses. Leakage inductance and temperature rise are two of the more impotent problems facing the magnetic core technology of today's high frequency transformers. Excessive leakage inductance increases the stress on the switching transistors and limits the duty-cycle, and excessive temperature rise can lead the design limitation of high frequency transformer with high current. The flat transformer technology provides a very good solution to the problems of leakage inductance and thermal management for high frequency power. The critical magnetic components and windings are optimized and packaged within a completely assembled module. The turns ratio in a flat transformer is determined as the product of the number of elements or modules times the number of primary turns. The leakage inductance increase proportionately to the number of elements, but since it is reduced as the square of the turns, the net reduction can be very significant. The flat transformer modules use cores which have no gap. This eliminates fringing fluxes and stray flux outside of the core. The secondary windings are formed of flat metal and are bonded to the inside surface of the core. The secondary winding thus surrounds the primary winding, so nearly all of the flux is captured.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.154-165
• /
• 1997

Abrasive wear characteristics of high Cr white cast iron-based hardfacing were investigated using the rubber wheel abrasion wear test method according with the ASTM G65-85. Mild steel was also tested for comparison with high Cr cast iron hardfacing. Wear experiments, where the applied force, wheel revolution rate and abrasive powder feed rate were selected as test valuables, were planned and analyzed by response surface method to evaluate wear statistically and quantitatively. Weight loss of high Cr cast iron hardfacing was mostly affected by the applied force and wheel revolution rate, and little by the powder feed rate. Weight loss of mild steel was greatly affected by the wheel revolution rate and powder feed rate, and slowly and steadily increased with the applied force. Abrasive wear mechanism of high Cr cast iron and mild steel was discussed in the light of the wear test results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1168-1171
• /
• 2003

In contrast to a conventional transformer, the flat transformer is made using a number of small ferrite cores. Two cores for transformer and one core for inductor, which composed one module. Many modules can be connected together to form a flat matrix transformer. This structural arrangement eliminates the single hot spot problem in conventional transformers and permits high current density pertains at high frequency. In this study, the ferrite magnetic cores of Mn-Zn system for the Flat transformer were manufactured and the electrical and magnetic characteristics of its tested. The power loss of sample FO2(Mn-Zn ferrite) sintered at $1350^{\circ}C$ was $350kW/m^3$ in test conditions of 250kHz, 200mT and $100^{\circ}C$, which showed the good power loss property in high frequency. The power loss of FO2 samples has been studied as a function of magnetic flux density and frequency. Steinmetz exponent was 2.82 at 250kHz and 2.73 at 500kHz. These results illustrated the switching of power loss mechanism in ferrite core from hysteresis losses to eddy current losses or others.