• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.60-67
• /
• 2011

본 연구에서는 고밀도 우드세라믹을 제조하기 위한 기초 연구로서 수지함침율 및 탄화온도에 따라 제조된 1차 탄화 우드세라믹을 수지 재 함침 후 2차 탄화하여 우드세라믹을 제조하고 밀도경사를 조사하였다. 2차 탄화 후 최소, 평균 및 최고밀도가 1차 탄화 우드세라믹보다 증가하였고, 밀도경사 비율도 증가하였다. 따라서 고밀도와 밀도경사 비율이 작은 균질한 우드세라믹을 제조하기 위해서는 2차 함침과 2차 탄화에 의한 우드세라믹 제조방법도 효과가 있는 것으로 나타났다.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.47-55
• /
• 2011

Cicada is a very familiar insect to people but habitat characteristics of them are not well known. To investigate habitat characteristics of cicada nymph, plant species, plant cover, soil hardness, accumulated organic mass, organic content in soil, and root density were investigated at 11 sites in an apartment complex garden in Seoul. Selected sites had different densities of cicada nymph case above the ground. Density of cicada nymph case was positively correlated with accumulated organic mass, organic content in soil, and root density and negatively correlated with soil hardness. Even though shrub coverage was not linearly correlated with the density of cicada nymph case, 80% cover of shrub was necessary for the high density of them. Data in this study suggested that organic matter in addition to root density be the primary limitation factor of cicada nymph and high amount of litter-fall decrease soil hardness through the increase of soil organic matter. This study suggests that the density of cicada nymph can be managed through organic content in soil.

• 한국분무공학회지
• /
• 제5권3호
• /
• pp.37-44
• /
• 2000

High velocity, gas-assisted liquid drop trajectories were investigated under well-controlled experimental conditions at elevated gas densities and room temperature. A monodisperse stream of drops which are generated by a vibrating-orifice drop generator were injected into a transverse high velocity gas stream. The gas density and air jet velocity were adjusted independently to keep the Weber numbers constant. The Weber numbers studied were 72, 148, 270, 532. The range of experimental conditions included studied the three drop breakup regimes previously referred as bag, stretching/thinning and catastrophic breakup regimes. High-magnification photography and conventional spray field photographs were taken to study the microscopic breakup mechanisms and the drop trajectories in high velocity gas flow fields, respectively. The parent drop trajectories were affected by the gas density and the gas jet velocities and do not show similarity with respect to the either Weber or the Reynolds number, as expected.

• Plant Resources
• /
• 제4권1호
• /
• pp.31-35
• /
• 2001

Major characteristics of new Waesungri maize inbred line has multi-tiller and ears: five to six tillers and seven to eight ears per plant and flowering date of Waesungri was delayed about 18 and 24 days compared to Mo17 U.S line and IK$_4$ Korean local lines, respectively. Number of ears, fresh and dry weight per plant were significantly different among all tested hybrids including Waesungri/Sinkihong hybrid under different planting times and densities. Especially, both fresh and dry weight of IK$_1$/FR140//Waesungri F$_1$hybrid were significantly higher at high planting density. In kernel weight per unit area, Wnesungri/Sinkihong hybrid was high at high density and IK$_1$/FR140//Waesungri hybrid was high at low planting density. As results of analysis of variance, flowering date was shown a significantly different both planting times and varieties, while other characters including stem height were shown very variable in interactions with enviromental factors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.149-153
• /
• 2003

In URD(Underground Residential Distribution) power cable, experiments of WVT(Water Vapor Transmission) test on the Base Resin accomplished to specimens which contained CB(Carbon Black), anti-oxidant to base resin and made by pressing to resin of pellet or lump form. a kind of specimens was HDPE(High Density Polyethylene), MDPE(Medium Density Polyethylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). as a results of WVT test, we saw that WVT ratio was HDPE < LLDPE < MDPE≒LDPE${\ll}$ PVC. WVT properties of PVC using for jacket showed properties 15-20 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB(Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE> LLDPE = MDP E> LDPE and WVT ratio was HDPE

• 농업과학연구
• /
• 제50권4호
• /
• pp.841-860
• /
• 2023

The present study was conducted to evaluate the effects of dietary mangosteen peel extract (MPE) on growth performance, serum biochemistry, jejunum morphology, and cytokine levels in growing pigs raised at a high stocking density. A total of 120 male growing pigs (43.68 ± 0.48 kg) were randomly arranged in a 2 × 2 factorial design with stocking density (high; HD, 0.55 m²/pig and normal; ND, 0.82 m²/pig) and dietary MPE (0 or 5 g/kg) as factors. Each treatment had six replicates with four or six pigs per treatment. Feed and water were provided ad libitum for 6 weeks. The HD group exhibited lower final body weight, average daily gain, and average daily feed than the ND group (p < 0.05). None of the factors affected villus height to crypt depth ratio. Dietary MPE, but not stocking density, increased IL-10 levels in the serum com-pared to the non-supplemented control diet (p < 0.05). In the microbiome analysis, alpha diversity analysis showed significant reductions in the MPE-treated group only under normal density conditions. High density stress induced gut microbiome changes and these response was differ between normal and MPE diet fed pigs. Overall, each group exhibited different major microbial composition in the gut. In conclusion, there were significant changes in the major microbial composition in response to high-density stress, and this variation was influenced by dietary treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권2호
• /
• pp.241-246
• /
• 2013

This study was conducted to evaluate the effects of dietary vitamin levels and stocking densities on growth performance, nutrient digestibility, and blood characteristics in growing pigs. A $2{\times}3$ factorial (two vitamin levels, three regimens of stocking densities) arrangement was utilized with 96 pigs ($23.10{\pm}0.95$ kg initial body weight and 63 d of age) for 36 d. The pigs were allocated to pens with different stocking density (0.64, 0.48, and 0.38 $m^2/pig$, respectively). The diets used in this study were a normal diet (based on NRC) and a high level of vitamin diet (2-fold higher than normal diet). The ADG and ADFI of pigs were decreased as the stocking density increased (p = 0.03 and p = 0.01, respectively). The G/F of pigs was 5% lower in the high vitamin treatment (p = 0.03) as compared with the control treatment. The apparent total tract digestibility (ATTD) of DM and N digestibility was negatively affected by the high level of vitamin in diets (p = 0.05 and p = 0.04, respectively). Moreover, a significant and negative effect on the ATTD of N was detected in the large groups (linear, p = 0.02). Blood cortisol concentration was increased with increasing stocking density (linear, p = 0.05), and was decreased by high level of vitamin (p = 0.04) at the end of this experiment. Stocking density also caused a linear reduction in WBC concentration (p = 0.05). Our data indicated that the principal effect of stocking density was not reliant on dietary vitamin levels. In conclusion, results indicated that doubling the vitamin supplementation did not improve the growth performance of pigs in high density. However, the blood cortisol concentration was decreased but the ATTD of N digestibility was impaired by high level of vitamin diet.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.761-767
• /
• 2010

This study introduces a model of territorial analysis on Chungcheongnam-do Nonsan-chun valley area, which gives an example of a method of selecting the management area for non-point pollution source from land use to help eliminate its source. High discharge load per unit area signify high level of land ratio with high level of basic unit of development load (including factory sites, school sites, roadways), which mean that there are a significant level of urbanization. It is these areas with the examination of the water quality of the nearby river that should be considered as the management area for non-point pollution source. Thus, the management area for non-point pollution source should be sought in areas with high discharge load per unit area and high density of water pollution area. When level of drainage is high the pollution density level is relatively lower, and when the level of drainage is low the density level is relatively higher. The level of pollution from non-point pollution source is much lower with more water flowing through. The possible non-point pollution source areas that were selected with these standards were then examined with the distance from the river, the slope angle, land usage, elevation, BOD discharge density load, T-N discharge density load, T-P discharge density load, and were given a level one through five. Out of the possible areas Nonsan-si Yeonmu-eup Anshim-li was the densest area, and it was given level one. The level one area should be examined further with the field analysis to be selected as the actual management area for non-point pollution source.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.9-16
• /
• 2005

This paper presents the development of new anisotropic conductive adhesives with enhanced thermal conductivity for the wide use of adhesive flip chip technology with improved reliability under high current density condition. The continuing downscaling of structural profiles and increase in inter-connection density in flip chip packaging using ACAs has given rise to reliability problem under high current density. In detail, as the bump size is reduced, the current density through bump is also increased. This increased current density also causes new failure mechanism such as interface degradation due to inter-metallic compound formation and adhesive swelling due to high current stressing, especially in high current density interconnection, in which high junction temperature enhances such failure mechanism. Therefore, it is necessary for the ACA to become thermal transfer medium to improve the lifetime of ACA flip chip joint under high current stressing condition. We developed thermally conductive ACA of 0.63 W/m$\cdot$K thermal conductivity using the formulation incorporating $5 {\mu}m$ Ni and $0.2{\mu}m$ SiC-filled epoxy-bated binder system to achieve acceptable viscosity, curing property, and other thermo-mechanical properties such as low CTE and high modulus. The current carrying capability of ACA flip chip joints was improved up to 6.7 A by use of thermally conductive ACA compared to conventional ACA. Electrical reliability of thermally conductive ACA flip chip joint under current stressing condition was also improved showing stable electrical conductivity of flip chip joints. The high current carrying capability and improved electrical reliability of thermally conductive ACA flip chip joint under current stressing test is mainly due to the effective heat dissipation by thermally conductive adhesive around Au stud bumps/ACA/PCB pads structure.